Search resources

This article explains when a SIM card is necessary for various AirLink devices and how a static IP can be obtained. 

This article provides information regarding entry of an APN for the GX, ES, LS, LX and RV device series. 

This article provides instructions for configuring an AirLink GX400, GX/ES440, GX/ES450, LS300, LX60 or RV50/RV50X and a Cisco 881 router for WAN Failover.

This article describes how to configure and send SMS commands using an AirLink device.

This article describes the hardware and configuration settings necessary to establish a Reverse SSH to a Serial Device behind an AirLink device.

This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways through Extended AT Application.

Release Notes for Firmware 7.52.0.A1 for an AirPrime or AirLink products

Release Notes for Extended AT Application 1.3.1 for an AirPrime or AirLink products

Release Notes for OS 6.52.0.A1 for an AirPrime or AirLink products

AirLink GX440 EOL (End of Life) Notice

This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways.

Release Notes for Firmware 7.52.0 & 7.52.1.A5 for AirPrime or AirLink products

Product : Verizon Wireless AirLink® GX440 and ES440 Devices

Full installer for Open AT Application Framework 2.53 for AirPrime Q2698 & AirLink FX100

Full installer for Open AT Application Framework 2.50.0.A2 for AirPrime Q2698 & AirLink FX100

AirLink ES440 EOL (End of Life) Notice

This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways.