AirVantage Management Services

SL808xT now fully support firmware and application update by delta mechanism from the AirVantage Management Services server in addition to the monitoring and remote debugging capability

Circuit Switched Data

SL808xT is able to perform CSD call to send data.

GPIO extension (beta)

Some SL8 PIN are being multiplexed with GPIO features in order to enhance GPIO numbers. The GPIO pins introduced are GPIO12-GPIO19.

Hidden Storage (beta)

Some APIs have been implemented in order to Write/Read Certificates and Keys as files to/from SL8 file system.

Supplementary services (beta)

Support of Voice Mail Indicator and Call barring supplementary services have been added on SL8.

+WPOW(beta)

Allows to speed up RF testing on SL8 at manufacturing. A continuous signal is supplied from the MS with a constant power level on a given channel. So, a GSM tester is able to measure transmitted signal level.

Remote Debugging

Ability to securely connect to an AirPrime module to manage a trace session in order to remotely analyze the traces.

Default APN for Management Services

Customer can disable the default usage of the standard APN if no APN are populated for AirVantage management Services.

AMS

AirVantage Management Services

APN

Access Point Name

CMUX

3GPP TS 27.010 multiplexing protocol

CSD

Circuit Switched Data

CTS

Clear to Send

Data Call

GSM Circuit Switched Data Call

DLC

Data Link Connection

EDGE

Enhanced Data rates for GSM Evolution

EF

Elementary File

EGPRS

Enhanced GPRS

FDN

Fixed Dialing Number (Phonebook)

GPRS

General Packet Radio Service

GSM

Global System for Mobile communications

IMEI

International Mobile Equipment Identity

MCC

Mobile Country Code

ME

Mobile Equipment

MNC

Mobile Network Code

MS

Mobile Station

PDP

Packet Data Protocol

PLMN

Public  Lands Mobile Network

PPP

Point-to-Point Protocol

SIM

Subscriber Identity Module

SMS

Short Message Service

UICC

Universal Integrated Circuit Card

USIM

Universal Subscriber Identity Module

[1]

4111843

AT Commands Interface Guide for Firmware 7.52 (Rev 6.0)

[2]

4111844

ADL User Guide for Open AT Application Framework OS 6.52 (Rev 6.0)

[3]

4111963

Product Technical Specification & Customer Design Guidelines - AirPrime Q2686 Refreshed (Rev 10.0)

[4]

4111964

Product Technical Specification & Customer Design Guidelines - AirPrime Q2687 Refreshed (Rev 12.0)

[5]

4111952

Product Technical Specification & Customer Design Guidelines - AirPrime SL6087 (Rev 10.0)

[6]

4111992

Product Technical Specification & Customer Design Guidelines - AirPrime SL808x, SL808xT, SL808xBT (Rev 8.3)

AirPrime SL8080T, SL8082T, SL8082BT, SL8084T

AirPrime Q2686 Refreshed / AirPrime Q2687 Refreshed

AirPrime SL6087

AirLink Fastrack Xtend EDGE (FXT009)

Open AT Application Framework

2.52.0.201405121558 or 2.52.1.A5.201409241253

AirVantage Agent Library

5.3.2.I201309261120 or 5.3.4.I201408221554

eCall Inband Modem Library

1.2.3.201306191228

Extended AT Application

1.3.1.201405121153

Internet Library

5.56.0.201305170830

Jamming Library

1.1.0.201312230837

Location Library

2.0.0.201310171016

OS

6.52.0.201402271535

SSL Library

2.2.0.201306261000

WMMP Library

4.2.0.201305240744

Certification (ATI8)

Firmware (ATI3)

Certification (ATI8)

Firmware (ATI3)

Certification (ATI8)

Firmware (ATI3)

Identification

1.3.36

7.52.0.201306260837

S4.1.0.13

7.52.0.201404040850

S4.1.0.17

7.52.1.A5.201409161240

Date of generation

2013/06/26 08:37

2013/06/26 08:37

2014/02/26 09:41

2014/04/04 08:50

2014/09/15 21:36

2014/09/16 12:40

Binary Size

1713240 bytes

673436 bytes

1790532 bytes

1796108 bytes

Checksum

0x85A2FB97

0x89796368

0x298B2DAD

0xF762F28D

Boot loader

X-modem

V10c05

S4.1.0.13

S4.1.0.17

First Stage

Boot loader

V10c05

S4.1.0.13

S4.1.0.17

IMEI SV

Q2686 Refreshed/Q2687 Refreshed: 0x19

SL6087: 0x19

0x13

0x17

Flash/RAM type

64/16 Mbits, 64/32 Mbits

NAND 128 MBytes / RAM 64 MBytes

NAND 128 MBytes / RAM 64 MBytes

Binary Update Tool

SL808xT

(FW 7.52.0)

R11.2.1105.0

SIERRA_BOOT_S4.1.0.13_sl808x.cwe, SIERRA_OAT_FW_752_68_FULL_sl808x.cwe

or R7.52.0.201404040850.SL808x.exe

SL808xT

(FW 7.52.1.A5)

SIERRA_BOOT_S4.1.0.13A_sl808x.cwe, SIERRA_OAT_FW_752_1_A5_2_FULL_sl808x.cwe

or R7.52.1.A5.201409161240.SL808x.exe

Developer Studio

All

3.1

DWLWin

AirPrime SL6087, Q2687RD, Q2686RD

4.2.01.02

R7.52.0.201306260837-cus-q26-01.wpk

MuxConfTool

All

4.5.6.0

Upgrade through Developer Studio

All

Open_AT_Application_Framework_v2-52_Full_Installer.exe

Upgrade through DWLWin

SL6087, Q2687RD, Q2686RD

R7.52.0.201306260837-cus-q26-01.wpk

Upgrade through Binary Update Tool

SL808xT

SIERRA_BOOT_S4.1.0.13_sl808x.cwe, SIERRA_OAT_FW_752_68_FULL_sl808x.cwe

or R7.52.0.201404040850.SL808x.exe

Upgrade through X-modem

SL6087, Q2687RD, Q2686RD, FXT009

Bootloader

dwl.dwl

Firmware

R7.52.0_<AirPrime>.dwl

SL808xT

Bootloader

SIERRA_BOOT_S4.1.0.13_sl808x.dwl

Firmware

SIERRA_OAT_FW_752_68_FULL_sl808x.dwl

Upgrade through Developer Studio

SL808xT

Open_AT_Application_Framework_v2-52-1-A5_Full_Installer.exe

Upgrade through Binary Update Tool

SL808xT

SIERRA_BOOT_S4.1.0.17_sl808x.cwe, SIERRA_OAT_FW_752_1_A5_2_FULL_sl808x.cwe

or R7.52.1.A5.201409161240.SL808x.exe

Upgrade through X-modem

SL808xT

Bootloader

SIERRA_BOOT_S4.1.0.17_sl808x.dwl

Firmware

SIERRA_OAT_FW_752_1_A5_2_FULL_sl808x.dwl

72229

Call waiting beeps for an incoming call are not heard during an active call.

GSM

SS

7.52.1.A5

74054

73979

In case of file system corruption, a recovery mechanism of critical firmware data has been implemented to secure module being able to power up. While recovering the module, file system content (files and A&D objects) may not fully recover. Present Open AT application is not impacted.

OTHER

OTHER

7.52.1.A5

65387

When AT+CLCK=”PN”,1,<password> command is executed, ERROR is returned.

AT

OTHER

7.52

67234

AT+WIMEI cannot set IMEI on AirPrimes with default/blank IMEI.

AT

OTHER

7.52

68260

+CLIP response is returned very late when interrogation of +CLIP status is rejected by network

AT

OTHER

7.52

68301

+CME ERROR: 30 is returned very late when the activation for call waiting is rejected by network.

AT

OTHER

7.52

68334

Activating/deactivating ENS feature using AT+WBHV is not functional.

AT

OTHER

7.52

68777

<ActiveConfig> setting of +SPEAKER is not maintained after AirPrime power cycles.

AT

OTHER

7.52

72215

AT+WPPP command fails to update password for CHAP/PAP protocol, if it is already set once.

AT

OTHER

7.52

65291

Deleted LDN phonebook entries still appear after AirPrime restarts on deleting the LDN phonebook by AT+WDCP="LD" command.

AT

PHONEBOOK

7.52

67175

Emergency Call 000 Fails with a PIN or PUK locked USIM.

AT

PHONEBOOK

7.52

64014

In PDU mode, the content of stored unsent message is altered after receiving a new message.

AT

SMS

7.52

65241

AT+CMGD command does not delete the message properly.

AT

SMS

7.52

68697

SMS cannot be sent after the activation of PDP context.

AT

SMS

7.52

70570

Occasional AirPrime reset while sending lots of SMS in quick succession.

AT

SMS

7.52

70076

Bridge mode fails in case of 2 PPP interfaces are bridged

DATA

OTHER

7.52

66695

AT+CMUT=1 does not mute the microphone. Instead it mutes the earphone.

DEVICE

AUDIO

7.52

67382

AirPrime is unable to stop the BUSY tone when an MO call is made to a busy phone number.

DEVICE

AUDIO

7.52

66285

On configuring the GPIO as INPUT using AT+WIOM command and then writing on the INPUT configured GPIO using AT+WIOW command, the direction on INPUT configured GPIO changes to OUTPUT.

DEVICE

IOB

7.52

67371

No error is received on subscribing to ADL BUS service, either on already subscribed GPIO or on unsupported GPIO.

DEVICE

IOB

7.52

69896

GPIO's subscribed as OUTPUT by using Application may switch its direction to INPUT after calling adl_extintSubscribe API.

DEVICE

IOB

7.52

70705

"CONNECT" message is not displayed when data connection is established on DLC opened on USB.

DEVICE

MUX

7.52

67839

SPI write sometimes fails when a payload exceeding 90 bytes is written repeatedly in a loop.

DEVICE

OTHER

7.52

68868

Sometimes AirPrime is not able to communicate on the SPI bus.

DEVICE

OTHER

7.52

69811

The volume of the speaker and microphone do not change for some values of gain of AT+WDGR and AT+WDGT.

DEVICE

OTHER

7.52

70931

Occasionally, ADL_INIT_REBOOT_FROM_EXCEPTION not received in adl_main if reset is caused due to Application inserting too many items in queue.

DEVICE

OTHER

7.52

69179

On USB port, DD frames are not received while activating the DATA mode for GPRS session.

DEVICE

USB

7.52

67208

On UART CTS pin becomes logical low on disabling hardware flow control.

DEVICE

V24

7.52

68653

Loopback connection on UART1 results in data loss.

DEVICE

V24

7.52

69862

Download of large file using Developer Studio fails over UART.

DEVICE

V24

7.52

67454

The XMODEM download over UART can be done only at the baud rate of 115200.

DWL

OTHER

7.52

69230

After few normal restarts (due to +WOPEN, +CFUN), AT+WDWL doesn't launch the xmodem bootloader.

DWL

OTHER

7.52

65856

AirPrime may restart during firmware upgrade through AirVantage Management Services.

AMS

AMS

7.52

66161

+CME ERROR: 515 is received, when an Application is running on AirPrime and +WDSO command is sent in concatenation with other command from AirVantage Management Services server.

AMS

AMS

7.52

66311

AirPrime cannot connect to the AirVantage Management Services when an HTTP connection has been created using Internet Library.

AMS

AMS

7.52

66315

If RDMS APN is not set and connection with first   tomer APN fails, AirPrime doesn’t try to connect with remaining   tomer APNs. Correct behavior is to try all PDP contexts one by one.

AMS

AMS

7.52

65760

AT+WPPP=1 without optional parameters returns +CME ERROR:3.

GPRS

OTHER

7.52

66956

+CGEV indications may not be reported when cid parameter is present in them.

GPRS

OTHER

7.52

69081

GPRS detach not performed with at+cgatt=0.

GPRS

OTHER

7.52

71930

AirPrime does not acknowledge LCP-ECHO request leading to disconnection of PPP on Linux OS.

GPRS

OTHER

7.52

69356

AirPrime restarts when AT+WIPBR is executed, for GPRS bearer, with combined length of <login> and <password> higher than 48.

GPRS

SESSION_MGT

7.52

68015

AT port can become unresponsive when the download XTRA command and the inquiry command are sent in a short time.

GPS

GPS

7.52

67170

67020

Improvements related to GPS performance

GPS

GPS

7.52

65891

During IP connection, sometimes event ADL_CALL_HANGUP_OK is not received when adl_callhangup() is called during an active call.

GSM

CC

7.52

66155

Emergency call not possible without SIM or when SIM PIN is locked and PIN is not yet entered.

GSM

CC

7.52

66631

During IP connection, sometimes event ADL_CALL_HANGUP_OK is not received when adl_callhangup() is called during an active call.

GSM

CC

7.52

67176

When a mobile originated emergency call is terminated using ATH, sometimes OK is not received and no further voice call is possible.

GSM

CC

7.52

67356

When a call waiting indication is seen, AT+CHLD=2 needs to be executed twice to accept the new call and to put the active call on hold.

GSM

CC

7.52

67357

Users with Call waiting service enabled have difficulty in hearing the ongoing call when a third call is in waiting.

GSM

CC

7.52

67358

User cannot use call waiting and call conferencing services.

GSM

CC

7.52

67542

ADL_CALL_EVENT_NO_CARRIER event not sent to the Application when call is BUSY.

GSM

CC

7.52

68243

When AT+CHLD=0 or AT+CHLD=1x command is issued, Active call is also disconnected.

GSM

CC

7.52

68302

When AT+CHLD=0 command is issued, Active call is also disconnected.

GSM

CC

7.52

68514

AT+CACM does not return correct accumulated meter values.

GSM

CC

7.52

69657

All emergency calls are directed to 112, instead of the emergency number specified.

GSM

CC

7.52

69825

AirPrime resets on dialing a number with 60 or more digits.

GSM

CC

7.52

70421

When SIM is in "No PIN" or "PIN1 blocked", emergency call can't be made.

GSM

CC

7.52

67546

Emergency call made after PUK1 is unlocked gets disconnected automatically after a short duration

GSM

CC

7.52

69425

Emergency Call 000 fails.

GSM

CC

7.52

65424

AT+CCED=0,8 always returns 99 for channel bit error rate.

GSM

OTHER

7.52

65776

<LAC> and <CellId> field value is not reported correctly through CCED response.

GSM

OTHER

7.52

67838

+WIND: 15 is not seen when there is a change in time zone.

GSM

OTHER

7.52

68339

When AT+CSSN=1,1 has been executed on AirPrime, the supplementary service notification for “additional incoming call forwarded” ( +CSSU: 10 ) is never received.

GSM

OTHER

7.52

71984

AT+CCED=0 leads to occasional reception of +CME ERROR: 30.

GSM

OTHER

7.52

67682

Stress testing AT+COPS=?, without waiting for response, leads to +CME ERROR 515 for all the AT commands including the AT command.

GSM

PLMN_SEL

7.52

68746

+CREG: 2 is not received on network loss.

GSM

RR

7.52

66017

SMS ADL callbacks not always received even if SMS is sent correctly.

GSM

SMS

7.52

69517

On sending the SMS again after changing the service type from GPRS to GSM (circuit switched),+CMS ERROR: 515 is received.

GSM

SMS

7.52

70420

Occasional AirPrime reset while sending SMS.

GSM

SMS

7.52

64421

<time> field of +CCFC is not displayed when <reason> is no reply.

GSM

SS

7.52

64814

Call waiting unsolicited responses (+CCWA ) are not received when the ongoing call has been put on hold.

GSM

SS

7.52

65377

At times complete incoming USSD string is not shown with +  D indication.

GSM

SS

7.52

68215

AT+CCFC=0,4 does not erase unconditional call forwarding for data call and AT+CCWA=0,0 does not disable call waiting for data call.

GSM

SS

7.52

68220

Call Barring Service not working.

GSM

SS

7.52

68250

AT+CCFC returns incorrect call forward status.

GSM

SS

7.52

68337

Registration of Call Forwarding Supplementary service for all asynchronous services, using ATD command, leads to registration of the service for all tele-services.

GSM

SS

7.52

68513

Call waiting status, received with +CCWA indications, is incorrect.

GSM

SS

7.52

68516

AirPrime displays the connected line identification presentation information even if "COLP" is not provisioned.

GSM

SS

7.52

68672

Call waiting status, received in +CCWA: indication, is incorrect.

GSM

SS

7.52

68901

Certain +  D indications are not received even when AT+  D=1 has been issued.

GSM

SS

7.52

69024

Extra responses of activating call forwarding including that of data, fax are received along with correct response for speech for BS codes =17(Voice group calling service) or 18(Voice broadcast service).

GSM

SS

7.52

69096

Supplementary service notification for “forwarded MT call” (+CSSU: 0) are missing when enabled by AT+CSSN=1.

GSM

SS

7.52

66868

Audio quality may deteriorate when audio & GPS operations are preformed concurrently.

HWL

AUDIO

7.52

66908

Microphone feedback in speaker may not change for some values of gain of AT+SIDET

HWL

AUDIO

7.52

68359

Wrong digital gain of the speaker in index received if the Gain set in Db mode.

HWL

AUDIO

7.52

69262

The DTMF tone is played locally at speaker when the tone is sent using AT+VTS.

HWL

AUDIO

7.52

70545

AirPrime indicates to network that it supports AMR-Wideband (even though it doesn't).

HWL

AUDIO

7.52

65626

API adl_ioGetCapabilitiesList() returns incorrect number of GPIOs (one more than the actual number of GPIO pins available on the AirPrime).

OTHER

OAT

7.52

65718

adl_ioRead() retrieves incorrect GPIO level values after some GPIO write operations.

OTHER

OTHER

7.52

66491

API adl_ctxSuspend does not work.

OTHER

OTHER

7.52

68534

SPI_CS_N may sometimes be released early, leading to data loss (last byte of SPI data).

OTHER

OTHER

7.52

72177

With some specific SIM cards, SIM initialization may sometimes fail.

SIM

RESET

7.52

66685

Software watchdog is not functional.

SYS

OTHER

7.52

69803

When trying to put a GDB breakpoint in an Application using a low level interrupt, the breakpoint isn't reached and AirPrime restarts.

SYS

OTHER

7.52

69086

Can't select Band 6 (UMTS800) with AT+WUBS command.

UMTS

CELL_SEL

7.52

65550

Indicator control, +CIND, reports incorrect signal quality.

UMTS

MEASUREMENT

7.52

65722

Wrong TON of address for phone number may be received for AT+CLIP command.

UMTS

OTHER

7.52

69054

The value <Maximum bitrate DL> in sometimes not set correctly with AT+CGEQREQ command.

UMTS

OTHER

7.52

63905

Unsolicited +WDSI indication sent after 10 minutes instead of 30 minutes when the Application does not sends a response to the user agreement. The maximum value that could be set for the timer to send the +WDSI indication is 19 minutes instead of the specified range ([0-1440] minutes).

AMS

AMS

7.52

64232

When an empty AMS APN is set using AT+WDSS command and at least one valid context is defined with a specific authentication protocol (NONE, PAP or CHAP), then this protocol is not being used for AMS context activation.

AMS

AMS

7.52

64233

CHAP authentication is not used when a PDP context is defined and a login and password is specified using AT+WDSS command.

AMS

AMS

7.52

64583

Sometimes, +WDSI:3 indication is received even if the package download fails due to communication issues with the AMS server.

AMS

AMS

7.52

65315

When the sequence of commands "AT+WREGC=0" and then "AT+COPS=0" is given, the OK response corresponding to "AT+COPS=0" is received very late. Also, when the sequence of commands "AT+COPS=0" and then "AT+WREGC=1" is given, the "OK" response corresponding to "AT+WREGC=1" is not received.

AT

OTHER

7.52

65795

AT+COPN command does not correctly display 6-digits PLMN information when MNC value starts with a leading 0 (e.g MNC=089).

AT

OTHER

7.52

66297

RI pulse is generated for all the unsolicited indications instead of indications generated only by Application, when bit 16 is set using AT+WRIM command.

AT

OTHER

7.52

63517

When command AT+ WBCM? is issued after downloading a new firmware, the default value of parameter “OverChargeVoltage” is shown incorrectly as 4608 instead of 4700.

AT

OTHER

7.52

67744

When GPRS is attached to the network then CEER (Extended Error Report) is not set to 0 but it remains to the last saved value.

AT

OTHER

7.52

55799

In +WBHV=0,1 configuration, +WIND:2 indication (the calling party is alerting) will not be received on terminal after making MO call.

AT

OTHER

7.52

56489

AirPrime may reset if ME phonebook is repeatedly filled and erased using AT+CPBW command over a long period.

AT

PHONEBOOK

7.52

59571

It is not possible to make an outgoing call by indicating the name field of the entry in LN, MC, RC, EN or SN phonebook.

AT

PHONEBOOK

7.52

65467

AT+CPBW does not accept values for <text> of even length that begin with "90".

AT

PHONEBOOK

7.52

65393

AirPrime does not respond when AT+CPBW command is issued for updating FDN phonebook with SSC String more than 20 digits.

AT

PHONEBOOK

7.52

59596

63603

Large size data packets, sent using FCM, are not received properly in case the frame size is specified higher than 127 while opening CMUX Session.

DEVICE

CMUX

7.52

63524

USB port can be disabled even if a CMUX session is active on it.

DEVICE

CMUX

7.52

63793

Issuing AT commands on a CMUX DLC and uploading data using DUN on another CMUX DLC may lead to a data stall as CTS of AirPrime goes high.

DEVICE

CMUX

7.52

65585

If CTS of the UART toggles very frequently during UART communication, it may sometimes lead to a reset.

DEVICE

V24

7.52

65401

When repeatedly switching between command mode and data mode at a high frequency, "+++" escape may sometimes not switch from data mode to command mode.

DEVICE

V24

7.52

62030

AirPrime does not come out of slow idle mode when a character is received on UART2 (keypress event).

DEVICE

V24

7.52

66164

Long AT commands (100 or more characters) may get corrupted when sent using Developer Studio. Repeatedly sending long AT commands may reset the AirPrime.

DEVICE

V24

7.52

64505

When a +WBCI: 0 unsolicited response is received by the device and if no charger is plugged, the baseband Power signal is not toggled to low state.

DEVICE

ADC/BAT

7.52

65565

AirPrime may reset when a CMUX session is active on USB port & the USB cable is plugged-out and plugged-in repeatedly.

DEVICE

CMUX

7.52

64277

UART becomes unresponsive after closing an active CMUX session with MuxConfTool v4.5.4.0.

DEVICE

CMUX

7.52

64497

AirPrime may reset when a CMUX session is active on USB port & the USB cable is plugged out and plugged in and then, an AT command is issued over the resumed DLC session.

DEVICE

MUX

7.52

64020

If echo has been enabled with ATE1 on UART, and a long command is entered repeatedly over long period, it sometimes may not be echoed back correctly.

DEVICE

V24

7.52

64146

Developer Studio may sometimes be unable to communicate with the AirPrime when it sends large amount of HAPC data to the AirPrime (when "Send AT commands requests in development mode" option in Developer Studio is checked)

DEVICE

V24

7.52

65880

When auto-baud is enabled, UART may become unresponsive if a large AT command (about 1000 characters long), is entered.

DEVICE

V24

7.52

66862

64970

Repeated PDP context modification in a loop results in +CME ERROR: 515.

GPRS

LLC

7.52

63690

The command AT+CGATT=1 returns +CME ERROR: 103 instead of +CME ERROR: 106 when the network rejects the attach request with the cause "illegal ME".

GPRS

OTHER

7.52

64455

The final response is not received at the terminal when valid network initiated PDP activation request is manually answered using AT+CGANS=1,1 command.

GPRS

OTHER

7.52

64517

When GPRS automatic mode is turned on, PDP context is not automatically activated when requested by the network.

GPRS

OTHER

7.52

65132

GPRS detach occurs if network sends a message with incorrect timeslot allocation value during an active data transfer session.

GPRS

OTHER

7.52

65031

Combined detach using AT+CGATT=2 (GPRS and GSM detach in the same network request on networks with Network Operation Mode of 1) is not functional.

GPRS

OTHER

7.52

57913

GPRS Dial-up (with CHAP authentication) may fail when PPP address compression deactivated

GPRS

OTHER

7.52

62400

With a dummy SIM, a spurious +CREG: 2 (searching for network) indication is received after receiving +CREG: 3 indication (registration is rejected by the network).

GSM

OTHER

7.52

62527

Activation of GPRS bearer fails when MIC listening service has been turned on.

HWL

AUDIO

7.52

64399

Abnormal ADC values may be reported at low input voltage (~0V) and high input voltage (>2V)

HWL

OTHER

7.52

63854

When stack is off and AT+WBHV? Command is executed, then DTMF duration is not shown as zero.

HWL

OTHER

7.52

60066

+CMS ERROR: 500 is received when character set is set other than HEX( using AT+CSCS command)  and an attempt is made to read the stored SMS from ME memory.

OTHER

OTHER

7.52

65379

IP packets sent by developer studio cannot be decoded by Wireshark as they do not have correct header.

OTHER

OTHER

7.52

54055

AirPrime resets on giving AT+CFUN=0 command when SIM removal is deactivated and +CME ERROR:13 has been received after opening the SIM rack.

SIM

OTHER

7.52

62622

When a UICC card issued and if there is no USIM AID found in EF_DIR (file containing the list of available applications) SIM doesn’t initialized with GSM application which may be present in file.

SIM

OTHER

7.52

65079

USIM which is declared as UICC but does not have a USIM application is not detected by AirPrime as an ICC (fallback operation).

SIM

OTHER

7.52

65162

Proactive polling is not done if the rack is opened and SIMREMOVE feature is off.

SIM

OTHER

7.52

66268

SIM/USIM is not detected if content of ATR is not compliant with the 3GPP standard.

SIM

RESET

7.52

66765

USIM declared as present even if it does not respond to validity check requests.

SIM

RESET

7.52

66929

Listing contents of file system in the root directory also lists symbolic link for parent directory ("..").

SYS

OTHER

7.52

63727

No interrupt triggered by TCU when it is setup in cyclic mode.

SYS

ISR

7.52

67469

After subscribing A&D Service if it is subscribed again at second time for the same Cell ID, API adl_adInfo() will return wrong value of size.

SYS

OTHER

7.52

58828

+CME ERROR: 3 is received on entering UserPin of size greater than 16 digits with +WDSB command.

AMS

AMS

7.51

57514

Using AMS, the SMS counter in roaming is not correctly incremented when the device is registered in Roaming on a PLMN where the MNC is 0 (like HK_CSL network: MCC: 454 , MNC: 00) This SMS counter in roaming should be correctly increment on all network.

AMS

AMS

7.51

61881

AirPrime resets when backtrace buffer becomes full and module tries to send this buffer to AMS server.

AMS

AMS

7.51

63287

If both UART ports are enabled, then after the reset of AirPrime, reset monitoring parameter for AMS is incremented by count of two instead of one.

AMS

AMS

7.51

61316

+CME ERROR: 515 is received, when an application is running on AirPrime and +WDSO command is sent in concatenation with other command from AMS server; it has to be sent alone first, then other commands can be sent (in one concatenate command or not) when the +WDSO response has been received on the server side. The same problem is encountered when the 1st command of the concatenated command is +WOPEN. Similar issue also happens when the command is sent on an external port.

AT

OTHER

7.51

63038

Default value for DSR signal cannot be restored using AT&F command, once the DSR signal value is stored as 0 in EEPROM using command AT&W.

AT

OTHER

7.51

59563

When AT+CPWD command is used to change the password for FDN facility, +CME ERROR: 3 is received.

AT

PHONEBOOK

7.51

60914

AirPrime is not able to switch to AT mode when CMUX session is closed.

DEVICE

CMUX

7.51

60952

AirPrime shows wrong weekday value after transition from Saturday to Sunday or from Sunday to Monday.

DEVICE

RTC

7.51

59390

When AT+WDSS command is issued to initiate connection with the AMS server and if GPRS session is activated by using command ATD*99***1# before reception of the unsolicited event '+WDSI: 6', then after issuance of the escape sequence (+++), the unsolicited event '+WDSI: 6' is incorrectly received before the reception of OK response.

DEVICE

V24

7.51

62780

Data transmission from the AirPrime gets stopped when an application that calls the API 'adl_fcmFlushV24TxData' upon toggling of DTR signal is running on the AirPrime.

DEVICE

V24

7.51

63592

After successful application upgrade using DOTA, adl_InitGetType() always returns ADL_INIT_DOWNLOAD_SUCCESS instead of ADL_INIT_POWER_ON  if a reset is given to the AirPrime.

FLASH

DOTA

7.51

59655

Command class gets blocked when the command "ATGH?" is issued.

GPRS

OTHER

7.51

62465

If AirPrime is not attached to GPRS service, AT+CGDATA=1 does not perform the necessary actions to set up communication between the module and the network. Instead it returns +CME ERROR: 3.

GPRS

OTHER

7.51

60282

OK is received instead of +CME ERROR: 3 when the SIM is removed immediately after issuing AT+CGACT=1,1 command.

GPRS

SESSION_MGT

7.51

63177

After deleting the SMS delivery report from the "SR" memory space, old SMS delivery report is still seen in memory if AT+CPMS? is executed after reset.

GSM

OTHER

7.51

63654

AirPrime may reset after sometime when command at+cfun=0 and at+cfun=1,0 are executed in loop repeatedly.

GSM

OTHER

7.51

62725

AirPrime accepts the assigned network operations even when the ciphering algorithm used with operation is not activated in the module.

GSM

RR

7.51

54810

ADL_RET_ERR_NOT_SUPPORTED error is received instead of ADL_RET_ERR_PARAM when TCU service is subscribed using an invalid PIN ID for Event Capture and Event Detection services.

OTHER

OTHER

7.51

63153

AirPrime may reset when filling the ME storage for SMS (AT+CPMS="ME","ME") using the AT+CMGW command.

RTX

OTHER

7.51

63211

Sometimes the AirPrime doesn't recover and reset repeatedly after the new application is installed. Also the AT commands are not accessible.

SYS

OTHER

7.51

AT+COPN

The table containing the operators name has been updated as per latest SE.13 list dated April 4, 2014.

AT+CNMI

AT+WUSS

AT+CNMA

AT+CSDH

AT+CMMS

AT+CMGF

AT+CSCA

+CMS ERROR: 302 error is returned (instead of +CME ERROR: 3) when the input parameters are set with incorrect values.

AT+CPHS

This Sierra Wireless proprietary command can be used to activate/de-activate voice mail indicator (< FctId> = 1).

AT+WHWV

This Sierra Wireless proprietary command can be used to get the hardware version

AT+W32K?

Read command for +W32k command is available now.

AT+CSMS

AT&F restores the default value of <service> parameter.

AT+CEER

<report> resets to 0 after a successful GPRS attach.

AT+WRDS

New Sierra Wireless proprietary command to configure remote debugging.

AT+WLERR

New Sierra Wireless proprietary command to know if the last reboot is due to an abnormal reset.

AT+CMUX

Default value of <T3> has been changed from 7 (15 ms) to 5 (10 ms).

AT+WTEMP

New Sierra Wireless proprietary command to get the board temperature

adl_fsWrite(),
adl_fsRead()

Returns the number of items written/read instead of number of characters

adl_rtcTime_t

Valid range for structure member “WeekDay” is updated to “0-6” instead of previous “1-7”

+++

Unsolicited responses are received after the OK when switching from data mode to AT mode using +++

AT+ADC

A new optional parameter <last-id> has been added to read a range of ADC pins instead of a single ADC.

AT+CEER

<report> resets to 0 after a successful GPRS attach.

AT+CMUX

Default value of <T3> has been changed from 7 (15 ms) to 5 (10 ms).

AT+CNMI

AT+WUSS

AT+CNMA

AT+CSDH

AT+CMMS

AT+CMGF

AT+CSCA

+CMS ERROR: 302 error is returned (instead of +CME ERROR: 3) when the input parameters are set with incorrect values.

AT+CNUM

+CME ERROR: 22 is returned instead of OK when "ON" phonebook is empty (i.e., no MSISDNs).

AT+COPN

The table containing the operators name has been updated as per latest SE.13 list dated 8th April 2013.

AT+COPS

New mode value, 127, introduced to force automatic PLMN selection at next power on.

AT+CSMS

AT&F restores the default value of <service> parameter.

AT+WBCM

Default value of <OverChargeVoltage> parameter after firmware download changed from 4608 to 4700.

AT+WDSM

New Sierra Wireless proprietary command allows a user to configure the GPRS APN to be used for an AMS session.

AT+WLERR

New Sierra Wireless proprietary command to know if the last reboot is due to an abnormal reset.

AT+WMFM

AT+CMUX

AT+WHCNF

Unplugging the USB cable or closing USB using AT+WHCNF closes any active CMUX session present over USB.

AT+WOPEN

Flash partitioning has been updated to use File System by default instead A&D Storage.

Note: With these default settings, File System will be used to manage firmware and application upgrade through DOTA, AMS and for emulating A&D storage.

AT+WOPEN

By default, 1792 Kbytes is allocated for Open AT Application & 3072 Kbytes for FileSystem.

AT+WRDS

New Sierra Wireless proprietary command to configure remote debugging.

Q2687 Refreshed

v3.49.0

v5.16

N/A

Q2686 Refreshed

v3.49.0

v5.16

N/A

SL6087

v3.49.0

v5.16

N/A

AirLinkTM Fastrack Xtend EDGE (FXT009)

v3.49.0

v5.16

N/A

SL8080T

N/A

N/A

N/A

SL8082T/SL8082BT

N/A

N/A

N/A

SL8084T

N/A

N/A

Yes