Search resources

This article provides Ingress Protection (IP) information for the GX400/440/450, LX60 and RV50/RV50X.

This article specifies the SIM card size used by the following devices: GX400/440/450, ES440/450, LS300, LX60 and RV50/RV50X.

This article provides ACEManager compatibility information.

This article lists the ways in which an X-Card can be obtained.

This article lists the frequency bands supported by the RV50 (MC7354 and MC7304).

This article lists the frequency bands supported by the GX450, ES450, and MC7304 devices.

This article lists the frequency bands supported by the LX60.

This article explains when a SIM card is necessary for various AirLink devices and how a static IP can be obtained. 

This article lists the networks that are available/certified for the following devices: GX/ES440, GX/ES450, LX60 and RV50/RV50X.

This article explains the purpose of the additional antenna port on the following AirLink Gateways: GX400, GX/ES440, GX/ES450, LS300, and RV50.

This article provides information regarding IPv6.

This article provides information regarding entry of an APN for the GX, ES, LS, LX and RV device series. 

This article provides instructions for configuring an AirLink GX400, GX/ES440, GX/ES450, LS300, LX60 or RV50/RV50X and a Cisco 881 router for WAN Failover.

This article describes how to configure and send SMS commands using an AirLink device.

This article provides pinouts and diagrams for the DC power cord used with the LS300 and GX Series modems.

Lists the Garmin GPS devices that are supported by the Nav application.

This article describes the hardware and configuration settings necessary to establish a Reverse SSH to a Serial Device behind an AirLink device.

This article explains why an aircard may not appear as installed in the oMG's LCI and how to resolve this issue.

This article lists the part numbers required to replace the oMG's power cable and in-line fuse.

Knox® MedVaults are Ethernet-enabled safes used to dispense drugs and to keep a count of what was dispensed. This article describes how to connect a MedVault to an oMG.