Provides a document describing how to configure multiple airlink routers or gateways with ALMS.

This article provides the hardware setup and configuration settings necessary to test sending SMS messages with the AirLink IP Protocol.

This article provides Ingress Protection (IP) information for the GX400/440/450, LX60 and RV50/RV50X.

This article specifies the SIM card size used by the following devices: GX400/440/450, ES440/450, LS300, LX60 and RV50/RV50X.

This article lists the frequency bands supported by the LX60.

This article lists the networks that are available/certified for the following devices: GX/ES440, GX/ES450, LX60 and RV50/RV50X.

This article provides information regarding entry of an APN for the GX, ES, LS, LX and RV device series.

This article explains when a SIM card is necessary for various AirLink devices and how a static IP can be obtained.

This article provides instructions for configuring an AirLink GX400, GX/ES440, GX/ES450, LS300, LX60 or RV50/RV50X and a Cisco 881 router for WAN Failover.

This article describes how to configure and send SMS commands using an AirLink device.

This article describes the hardware and configuration settings necessary to establish a Reverse SSH to a Serial Device behind an AirLink device.

This video shows how to provision the Sierra Wireless AirLink GX450 gateway.

This tutorial will guide you in creating an ALEOS AF application that leverages the AirVantage Application Services platform to transmit, receive and remotely store data.

Check out this section of AirVantage User Manual to know how to connect a wireless device to AirVantage M2M Cloud.

This video introduces the key concepts of ALEOS AF and what it enables.

This tutorial walks new users through setting up the developer studio and developing their first ALEOS AF application. The ALEOS AF Getting Started tutorial will walk users through the majority of the Developer Studio features such as debugging and install package generation.

This document will guide you in creating a simple geo-fencing application using the ALEOS Application Framework.

This tutorial explains how to set up ALEOS AF hardware.