This article specifies the SIM card size used by the following devices: GX400/440/450, ES440/450, LS300, LX60 and RV50/RV50X.

This article lists the frequency bands supported by the RV50 (MC7354 and MC7304).

This article lists the frequency bands supported by the GX450, ES450, and MC7304 devices.

This article lists the ways in which an X-Card can be obtained.

This article lists the networks that are available/certified for the following devices: GX/ES440, GX/ES450, LX60 and RV50/RV50X.

This article provides information regarding entry of an APN for the GX, ES, LS, LX and RV device series.

This article explains when a SIM card is necessary for various AirLink devices and how a static IP can be obtained.

This article provides information regarding IPv6.

This article provides instructions for configuring an AirLink GX400, GX/ES440, GX/ES450, LS300, LX60 or RV50/RV50X and a Cisco 881 router for WAN Failover.

This article provides pinouts and diagrams for the DC power cord used with the LS300 and GX Series modems.

This article describes how to configure and send SMS commands using an AirLink device.

This article describes the hardware and configuration settings necessary to establish a Reverse SSH to a Serial Device behind an AirLink device.

Learn how to create communication between AirVantage and Arduino-based system equiped with an AirPrime HL wireless module.

This document explains how to get started with Legato.

Learn how to create communication between AirVantage and Arduino-based system equiped with an AirPrime HL wireless module.

Learn how to create a communication with AirVantage Cloud from a Linux-based system equiped with a HL wireless module.

This video shows how to provision the Sierra Wireless AirLink GX450 gateway.

This tutorial will guide you in creating an ALEOS AF application that leverages the AirVantage Application Services platform to transmit, receive and remotely store data.