Search resources

Open AT Application Framework release Notes includes :     Open AT Application Framework 2.52.1.A5 (SL808xT)      Open AT Application Framework 2.52.0.A1 (Q2698)      Open AT Application Framework 2.52      Open AT Application Framework 2.51      Open AT Application Framework.2.37.6      Open AT Application Framework 2.37.4      Open AT Application Framework 2.37      Open AT Application Framework 2.36      Open AT Application Framework 2.35.5      Open AT Application Framework 2.35      Open AT Application Framework 2.34      Open AT Application Framework 2.33      Open AT Application Framework 2.32      Open AT Application Framework 2.31      Open AT Application Framework 2.30      Open AT Application Framework 2.21      Open AT Application Framework 2.20      Open AT Application Framework 2.12      Open AT Application Framework 2.11      Open AT Application Framework 2.10      Open AT Application Framework 2.02a

Release Notes for Firmware 7.52.0 & 7.52.1.A5 for AirPrime or AirLink products

This document presents guidelines for the industrial assembly of an AirPrime SL Series embedded wireless module on an application.

Here are the available USB drivers Linux DIP Release Notes: USB drivers Linux DIP Release Note 3.6_1.7.50 USB drivers Linux DIP Release Note 1.1

Archive contain CAD files to ease customer hardware design

Full installer for Open AT Application Framework 2.52.2.A5 for AirPrime SL808xT

Latest Linux CnS V2 SDK Software 1.4.0.6

GPS receivers of Sierra Wireless AirPrime modules can be connected to a passive antenna (which should be physically located very close to the unit) or a remote active antenna containing an LNA, which will both improve SNR and compensate for any cable/insertion losses. This application note describes the use of the integrated GPS active antenna powering function when available, and how to design an external powering circuit where required.

This document describes how to set up the SL Series Mechanical Socket Development Kit (board version 1400746-B) with an AirPrime SL Series embedded module (SL6087, SL808x, SL809x and SL5011).

This application note describes how to perform voice over IP using PCM (for 3G modules) and AMR (for 2G modules).

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Measured current consumption  Different modules' operating modes Different scenarios.  This application note will be useful for those customers who want to obtimize the size and the capacity of the battery to be used.

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Li-Polymer battery used Possible drops of the battery voltage below its over discharge threshold (~2.8V) Only a DC voltage source available to charge the battery (impossible to connect an external charger)

Latest USB drivers Linux DIP Release Note 3.6_1.7.50

The purpose of this application note is to provide a first level of suitable information to select and implement a power supply solution for a GSM application.

Full installer for Open AT Application Framework 2.52.1.A5 for AirPrime SL808xT

This Application Note describes the hands free solution available on AirPrime Q26 and WMP Series, and the SL6087 module. A brief explanation of the hands free solution is followed by a detailed presentation covering the following: Overview and block schematic Parameters explanation Tuning guidelines and default parameters

This application note provides design considerations for PCS1900 band OTA desensitization.