Search resources

Document stating the compliance of AirPrime products towards Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

Document stating the compliance of AirLink and AirPrime products toward California Regulation on Chemicals Proposition 65.

AirPrime SL8080 / SL8081 / SL8082 / SL8083 / SL8084 Declaration of European Union RoHS Compliant Product

Open AT Firmware release notes includes  :     Firmware 7.54.2.A1 (SL808xT/ BT)     Firmware 7.54.0.A1 (SL808xT/ BT)     Firmware 7.53.1.A1 (SL808xT/ BT)     Firmware 7.52.5.A5      Firmware 7.52.2.A5      Firmware 7.52.1.A5 (SL808xT)      Firmware 7.52.0.A1 (Q2698)      Open AT Frimware 7.52      Open AT Firmware 7.51      Open AT Firmware 7.50      Open AT Firmware 7.4a      Open AT Firmware 7.47.6_V2      Open AT Firmware 7.47.6      Open_AT_Firmware 7.47.4      Open_AT_Firmware 7.47      Open_AT_Firmware 7.46      Open_AT_Firmware 7.45.5      Open_AT_Firmware 7.45.1      Open_AT_Firmware 7.45      Open_AT_Firmware 7.44      Open_AT_Firmware 7.43      Open_AT_Firmware 7.42      Open_AT_Firmware 7.4      Open_AT_Firmware 7.3a      Open_AT_Firmware 7.3      Open_AT_Firmware 7.2a      Open_AT_Firmware 7.2

X-modem & exe file for Firmware 7.52.5.A5 for AirPrime SL808xT

Full installer for Open AT Application Framework 2.52.5.A5 for AirPrime SL808xT

This application note describes how to design a Dual SIM solution without using the SIM detection pin of the module.

This Application Note describes the audio design guidelines to optimize the implementation of hardware, gains and algorithms tuning of the AirPrime SL808xT, SL808xBT, and SL808xBTA embedded module.

This Application Note presents the steps to set up a PPP connection in Linux Operating System using the Sierra Wireless embedded module. As Windows® and Linux® have different procedures for creating a PPP connection, this application note provides details about the process for Linux environment. The steps to create the connection are well supported with images to graphically depict those steps.

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

This document describes proprietary, password-protected AT commands available for Sierra Wireless AirPrime™ MC/SL-series intelligent embedded modules.

This document describes standard and proprietary AT commands available for AirPrime™ SL and MC Series modules. 

Download the FW S4_1_0_12 Release Note

Download the FW S4_1_0_13 Release Note

This document describes the features and specifications of the AirPrime SL808xT, SL808xBT and SL808xBTA 3G modules and provides you with the information required to integrate the module into your products.

Download the Telstra approved FW S4_1_0_13

Download the Docomo approved FW S4.1.0.7D