Firmware 7.52.5.A5 Release Notes
- Nov 23, 2017
- Author: Sierra Wireless
- Version: 7.52.5.A5
1.3. New Features/Enhancements
2. Abbreviations and Definitions
5. Software Release Description
5.3. Released Files and Download Processes
6. Software Changes Description
Table 1. New Features/Enhancements
Table 2. Abbreviations and Definitions
Table 3. Related Documentation
Table 4. Hardware Compatibility
1. Introduction
1.1. Document Scope
1.2. Document Audience
This release note may be distributed to all direct and indirect customers and will be posted in the Source.
1.3. New Features/Enhancements
Table 1. New Features/Enhancements
|
Feature |
Description |
|
Memory support |
Support new Winbond memory W29N01GW |
2. Abbreviations and Definitions
Table 2. Abbreviations and Definitions
|
Definitions |
|
|
AMS |
AirVantage Management Services |
|
APN |
Access Point Name |
|
CMUX |
3GPP TS 27.010 multiplexing protocol |
|
CSD |
Circuit Switched Data |
|
CTS |
Clear to Send |
|
Data Call |
GSM Circuit Switched Data Call |
|
DLC |
Data Link Connection |
|
EDGE |
Enhanced Data rates for GSM Evolution |
|
EF |
Elementary File |
|
EGPRS |
Enhanced GPRS |
|
FDN |
Fixed Dialing Number (Phonebook) |
|
GPRS |
General Packet Radio Service |
|
GSM |
Global System for Mobile communications |
|
IMEI |
International Mobile Equipment Identity |
|
MCC |
Mobile Country Code |
|
ME |
Mobile Equipment |
|
MNC |
Mobile Network Code |
|
MS |
Mobile Station |
|
PDP |
Packet Data Protocol |
|
PLMN |
Public Lands Mobile Network |
|
PPP |
Point-to-Point Protocol |
|
SIM |
Subscriber Identity Module |
|
SMS |
Short Message Service |
|
UICC |
Universal Integrated Circuit Card |
|
USIM |
Universal Subscriber Identity Module |
3. Related Documentation
Table 3. Related Documentation
|
Ref. # |
Doc. # |
Rev. |
Document title |
|
6.0 |
|||
|
[2] |
6.0 |
||
|
8.3 |
AirPrime SL808x, SL808xT, SL808xBT Product Technical Specification and Customer Design Guidelines |
||
|
[4] |
4115145 |
5.1 |
AirPrime SL808xT, SL808xBT and SL808xBTA Product Technical Specification and Customer Design Guidelines |
|
[5] |
1.2 |
||
|
[6] |
4112314 |
3.0 |
AirPrime SL Series Mechanical Socket Development Kit User Guide |
|
3.0 |
4. Compatibility
Table 4. Hardware Compatibility
|
AirPrime Compatibility List |
|
AirPrime SL8080T, SL8080BT |
|
AirPrime SL8082T, SL8082BT |
|
AirPrime SL8084T, SL8084BT |
Table 5. Software Compatibility
|
Component |
Version |
|
Open AT Application Framework |
2.52.5.A5.201611280511 |
|
Open AT Firmware |
7.52.5.A5.201611030614 |
|
Open AT OS |
6.52.0.201609210738 |
|
Location Library |
2.0.0.201310171016 |
|
Security Library |
2.2.4.201610061056 |
|
Internet Library |
5.56.0.201305170830 |
|
Extended AT Application |
1.3.3.A5.201611251325 |
|
AirVantage Agent |
5.3.6.I201504101620 |
5. Software Release Description
5.1. Release Identification
Table 6. Firmware Release Information
|
Modem (ATI8) |
Services (ATI3) |
|
|
Identification |
S4_1_0_24 |
7.52.5.A5.201611030614 |
|
Date of generation |
2016/11/02 12:57:24 |
2016/10/30 06:14 |
|
Binary Size |
1805064 bytes |
|
|
Checksum |
0x95d59726 |
|
|
Boot loader X-modem |
S4_1_0_24 |
|
|
First stage boot loader |
S4_1_0_24 |
|
|
IMEI SV |
0x29 |
|
|
Flash/RAM type |
NAND 128 MBytes / RAM 64 Mbytes |
|
5.2. Software Tools Versions
|
S/W Tools Name |
Version |
Resource file |
|
Binary Update Tool |
R11.2.1105.0 |
SIERRA_BOOT_S4.1.0.24_sl808x.cwe, SIERRA_OAT_FW_752_5_A5_2_FULL_sl808x.cwe or R7.52.5.A5.SL808x_201611030614_2.exe |
|
Developer Studio |
3.1 |
|
|
MuxConfTool |
4.5.6.0 |
5.3. Released Files and Download Processes
|
Download Option |
Files |
|
|
Upgrade through Developer Studio |
Open_AT_Application_Framework_v2-52-5-A5_Full_Installer.exe |
|
|
Upgrade through Binary Update Tool |
SIERRA_BOOT_S4.1.0.24_sl808x.cwe, SIERRA_OAT_FW_752_5_A5_2_FULL_sl808x.cwe or R7.52.5.A5.SL808x_201611030614_2.exe |
|
|
Upgrade through X-modem |
Bootloader |
SIERRA_BOOT_S4.1.0.24_sl808x.dwl |
|
Firmware |
SIERRA_OAT_FW_752_5_A5_2_FULL_sl808x.dwl |
|
Note:
Applications built with a version before Open AT Application
Framework 2.52 have to be rebuilt with
this Open AT Application Framework.
On AirPrime SL808xT with Firmware 7.50.0.A1, firmware (SIERRA_OAT_FW_752_5_A5_2_FULL_sl808x)
should be upgraded before bootloader (SIERRA_BOOT_S4.1.0.24_sl808x), if .cwe or
.dwl files are used for upgrade. R7.52.5.A5.SL808x_201611030614_2.exe can be
used to recover AirPrime SL808xT in bad state.
For the upgrade procedure, you can refer to:
· In-line help for upgrade procedure through Developer Studio
6. Software Changes Description
6.1. Validated Corrections/Improvements
This section presents all corrections or improvements integrated in Firmware 7.52.5.A5.
Issues are sorted by alphabetical order of Impacted Domain.
|
Description |
Impacted Domain |
Impacted Sub-Domain |
Fixed in |
|
|
QSC6270-445 |
If AirPrime repeatedly restarts at power up, it could trigger a fallback of the firmware without reporting +WDSI:14/17,0 unsolicited indications. |
AMS |
AMS |
7.52.5.A5 |
|
QSC6270-658 |
In "Firmware Recovery mechanism", the firmware reverse patch is not installed automatically after 4 unwanted resets if the reverse patch contains bootloader. AirPrime should be powered off/on for the fallback to occur. |
DWL |
OATBOOT |
7.52.5.A5 |
|
OATFW-5631 |
AirPrime may forward its device name incorrectly to the AMS server. |
FLASH |
EEPROM |
7.52.5.A5 |
|
AirPrime could fail to initialize, if files commonly under both nvp folder and nvp-mirror folder are corrupted. |
FLASH |
EEPROM |
7.52.5.A5 |
|
|
QSC6270-597 |
IMEI programmed by the customer may be reset to the default firmware setting, due to memory bit-flip issue. |
FLASH |
EEPROM |
7.52.5.A5 |
|
QSC6270-660 |
With a special SIM, occasionally BCH request has not been processed. It makes AirPrime fail to perform the cell reselection. |
GSM |
CELL_SEL |
7.52.5.A5 |
|
QSC6270-661 |
AirPrime may restart due to a conflict of multitask handling. |
GSM |
RR |
7.52.5.A5 |
|
On rare occasions, GPIO initialization in the firmware may be unsuccessful and can lead to GPIO subscription failure. |
GPIO |
SERVICE |
7.52.5.A5 |
|
|
AirPrime doesn’t give NO CARRIER indication, when data connection is disconnected by unexpected RF shutdown due to overheat. |
GPRS |
OTHER |
7.52.5.A5 |
|
|
OATFW-6073 |
Dial-up connection cannot be established with "NONE" PPP authentication. |
NET |
OTHER |
7.52.5.A5 |
|
Sending AT+CRSM command with a special USIM to AirPrime could make it restart. |
SIM |
OTHER |
7.52.5.A5 |
|
|
File contents under '.' and '..' folders in the file system cannot be listed. |
SYS |
OTHER |
7.52.5.A5 |
|
|
SYS |
OTHER |
7.52.5.A5 |
||
|
OATFW-4558 |
Installation of AMS firmware/embedded application delta may sometime fail if the AirPrime is powered-off just after +WDSI: 14 unsolicited response. |
AMS |
AMS |
7.52.2.A5 |
|
OATFW-5547 |
After the AirPrime is reset, AMS login and password set using AT+WDSS are not displayed |
AMS |
AMS |
7.52.2.A5 |
|
OATFW-12346 |
AMS firmware/embedded application delta update may fail if GPRS attach is performed bearer is started right at the point when the AirPrime is trying to perform network detach. |
AMS |
AMS |
7.52.2.A5 |
|
OATFW-12336 |
PDP context activation request to AMS server after patch update is sent without username and password information. |
AMS |
AMS |
7.52.2.A5 |
|
OATFW-11415 |
AT+PACSP (AT&T proprietary command) is not functional |
AT |
OTHER |
7.52.2.A5 |
|
OATFW-12330 |
SPI block cannot be subscribed more than with different chip select signal |
DEVICE |
IOB |
7.52.2.A5 |
|
QSC6270-701 |
Installation of a corrupt firmware or a corrupt embedded application is not blocked by the firmware, due to lack of CRC check. |
DWL |
OATBOOT |
7.52.2.A5 |
|
OATFW-12327 |
WIP bearer start may fail if the APN requires authentication. |
GPRS |
SESSION_MGT |
7.52.2.A5 |
|
OATFW-12328 |
Service status in the network for +CLIP/+CLIR/+COLP supplementary service is incorrectly displayed as not provisioned, even if the service is provisioned. |
GSM |
SS |
7.52.2.A5 |
|
OATFW-11492 QSC6270-323 |
In case of file system corruption, a recovery mechanism of critical firmware data has been implemented to secure module being able to power up. While recovering the module, file system content (files and A&D objects) may not fully recover. Present Open AT application is not impacted. |
OTHER |
OTHER |
7.52.2.A5 |
|
OATFW-12329 |
ADL_SIM_EVENT_FULL_INIT event not received if UART2 is attempted to be opened |
SIM |
OTHER |
7.52.2.A5 |
|
OATFW-8127 |
Call waiting beeps for an incoming call are not heard during an active call. |
GSM |
SS |
7.52.1.A5 |
|
OATFW-2920 |
AirPrime may restart during firmware upgrade through AirVantage Management Services. |
AMS |
AMS |
7.52.0 |
|
OATFW-3059 |
+CME ERROR: 515 is received, when an Application is running on AirPrime and +WDSO command is sent in concatenation with other command from AirVantage Management Services server. |
AMS |
AMS |
7.52.0 |
|
OATFW-3114 |
AirPrime cannot connect to the AirVantage Management Services when an HTTP connection has been created using Internet Library. |
AMS |
AMS |
7.52.0 |
|
OATFW-3116 |
If RDMS APN is not set and connection with first customer APN fails, AirPrime doesn't try to connect with remaining customer APNs. Correct behavior is to try all PDP contexts one by one. |
AMS |
AMS |
7.52.0 |
|
OATFW-3721 |
+CLIP response is returned very late when interrogation of +CLIP status is rejected by network |
AT |
OTHER |
7.52.0 |
|
OATFW-3735 |
+CME ERROR: 30 is returned very late when the activation for call waiting is rejected by network. |
AT |
OTHER |
7.52.0 |
|
OATFW-3754 |
Activating/deactivating ENS feature using AT+WBHV is not functional. |
AT |
OTHER |
7.52.0 |
|
OATFW-7897 |
<ActiveConfig> setting of +SPEAKER is not maintained after AirPrime power cycles. |
AT |
OTHER |
7.52.0 |
|
OATFW-4878 |
AT+WPPP command fails to update password for CHAP/PAP protocol, if it is already set once. |
AT |
OTHER |
7.52.0 |
|
OATFW-7648 |
When AT+CLCK=”PN”,1,<password> command is executed, ERROR is returned. |
AT |
OTHER |
7.52.0 |
|
OATFW-7770 |
AT+WIMEI cannot set IMEI on AirPrimes with default/blank IMEI. |
AT |
OTHER |
7.52.0 |
|
OATFW-2737 |
Deleted LDN phonebook entries still appear after AirPrime restarts on deleting the LDN phonebook by AT+WDCP="LD" command. |
AT |
PHONEBOOK |
7.52.0 |
|
OATFW-7762 |
Emergency Call 000 Fails with a PIN or PUK locked USIM. |
AT |
PHONEBOOK |
7.52.0 |
|
OATFW-2353 |
In PDU mode, the content of stored unsent message is altered after receiving a new message. |
AT |
SMS |
7.52.0 |
|
OATFW-2716 |
AT+CMGD command does not delete the message properly. |
AT |
SMS |
7.52.0 |
|
OATFW-7891 |
SMS cannot be sent after the activation of PDP context. |
AT |
SMS |
7.52.0 |
|
OATFW-8027 |
Occasional AirPrime reset while sending lots of SMS in quick succession. |
AT |
SMS |
7.52.0 |
|
OATFW-4393 |
Bridge mode fails in case of 2 PPP interfaces are bridged |
DATA |
OTHER |
7.52.0 |
|
OATFW-3435 |
AirPrime is unable to stop the BUSY tone when an MO call is made to a busy phone number. |
DEVICE |
AUDIO |
7.52.0 |
|
OATFW-7728 |
AT+CMUT=1 does not mute the microphone. Instead it mutes the earphone. |
DEVICE |
AUDIO |
7.52.0 |
|
OATFW-3094 |
On configuring the GPIO as INPUT using AT+WIOM command and then writing on the INPUT configured GPIO using AT+WIOW command, the direction on INPUT configured GPIO changes to OUTPUT. |
DEVICE |
IOB |
7.52.0 |
|
OATFW-3431 |
No error is received on subscribing to ADL BUS service, either on already subscribed GPIO or on unsupported GPIO. |
DEVICE |
IOB |
7.52.0 |
|
OATFW-7977 |
GPIO's subscribed as OUTPUT by using Application may switch its direction to INPUT after calling adl_extintSubscribe API. |
DEVICE |
IOB |
7.52.0 |
|
OATFW-8034 |
"CONNECT" message is not displayed when data connection is established on DLC opened on USB. |
DEVICE |
MUX |
7.52.0 |
|
OATFW-3964 |
Sometimes AirPrime is not able to communicate on the SPI bus. |
DEVICE |
OTHER |
7.52.0 |
|
OATFW-4314 |
The volume of the speaker and microphone do not change for some values of gain of AT+WDGR and AT+WDGT. |
DEVICE |
OTHER |
7.52.0 |
|
OATFW-4589 |
Occasionally, ADL_INIT_REBOOT_FROM_EXCEPTION not received in Dalman if reset is caused due to Application inserting too many items in queue. |
DEVICE |
OTHER |
7.52.0 |
|
OATFW-7835 |
SPI write sometimes fails when a payload exceeding 90 bytes is written repeatedly in a loop. |
DEVICE |
OTHER |
7.52.0 |
|
OATFW-4083 |
On USB port, DD frames are not received while activating the DATA mode for GPRS session. |
DEVICE |
USB |
7.52.0 |
|
OATFW-3371 |
On UART CTS pin becomes logical low on disabling hardware flow control. |
DEVICE |
V24 |
7.52.0 |
|
OATFW-7886 |
Loopback connection on UART1 results in data loss. |
DEVICE |
V24 |
7.52.0 |
|
OATFW-7975 |
Download of large file using Developer Studio fails over UART. |
DEVICE |
V24 |
7.52.0 |
|
OATFW-4104 |
After few normal restarts (due to +WOPEN, +CFUN), AT+WDWL doesn't launch the xmodem bootloader. |
DWL |
OTHER |
7.52.0 |
|
QSC6270-704 |
The XMODEM download over UART can be done only at the baud rate of 115200. |
DWL |
OTHER |
7.52.0 |
|
OATFW-3304 |
+CGEV indications may not be reported when cid parameter is present in them. |
GPRS |
OTHER |
7.52.0 |
|
OATFW-4046 |
GPRS detach not performed with at+cgatt=0. |
GPRS |
OTHER |
7.52.0 |
|
OATFW-7673 |
AT+WPPP=1 without optional parameters returns +CME ERROR:3. |
GPRS |
OTHER |
7.52.0 |
|
OATFW-8104 |
AirPrime does not acknowledge LCP-ECHO request leading to disconnection of PPP on Linux OS. |
GPRS |
OTHER |
7.52.0 |
|
OATFW-7940 |
AirPrime restarts when AT+WIPBR is executed, for GPRS bearer, with combined length of <login> and <password> higher than 48. |
GPRS |
SESSION_MGT |
7.52.0 |
|
OATFW-3657 |
AT port can become unresponsive when the download XTRA command and the inquiry command are sent in a short time. |
GPS |
GPS |
7.52.0 |
|
OATFW-7760 OATFW-7749 |
Improvements related to GPS performance |
GPS |
GPS |
7.52.0 |
|
OATFW-3056 |
Emergency call not possible without SIM or when SIM PIN is locked and PIN is not yet entered. |
GSM |
CC |
7.52.0 |
|
OATFW-3426 |
When a call waiting indication is seen, AT+CHLD=2 needs to be executed twice to accept the new call and to put the active call on hold. |
GSM |
CC |
7.52.0 |
|
OATFW-3427 |
User cannot use call waiting and call conferencing services. |
GSM |
CC |
7.52.0 |
|
OATFW-3503 |
ADL_CALL_EVENT_NO_CARRIER event not sent to the Application when call is BUSY. |
GSM |
CC |
7.52.0 |
|
OATFW-3710 |
When AT+CHLD=0 or AT+CHLD=1x command is issued, Active call is also disconnected. |
GSM |
CC |
7.52.0 |
|
OATFW-3736 |
When AT+CHLD=0 command is issued, Active call is also disconnected. |
GSM |
CC |
7.52.0 |
|
OATFW-3827 |
AT+CACM does not return correct accumulated meter values. |
GSM |
CC |
7.52.0 |
|
OATFW-4264 |
All emergency calls are directed to 112, instead of the emergency number specified. |
GSM |
CC |
7.52.0 |
|
OATFW-4322 |
AirPrime resets on dialing a number with 60 or more digits. |
GSM |
CC |
7.52.0 |
|
OATFW-7763 |
When a mobile originated emergency call is terminated using ATH, sometimes OK is not received and no further voice call is possible. |
GSM |
CC |
7.52.0 |
|
OATFW-7679 |
During IP connection, sometimes event ADL_CALL_HANGUP_OK is not received when adl_callhangup() is called during an active call. |
GSM |
CC |
7.52.0 |
|
OATFW-7724 |
During IP connection, sometimes event ADL_CALL_HANGUP_OK is not received when adl_callhangup() is called during an active call. |
GSM |
CC |
7.52.0 |
|
OATFW-7786 |
Users with Call waiting service enabled have difficulty in hearing the ongoing call when a third call is in waiting. |
GSM |
CC |
7.52.0 |
|
OATFW-7945 |
Emergency Call 000 fails. |
GSM |
CC |
7.52.0 |
|
When SIM is in "No PIN" or "PIN1 blocked", emergency call can't be made. |
GSM |
CC |
7.52.0 |
|
|
QSC6270-42 |
Emergency call made after PUK1 is unlocked gets disconnected automatically after a short duration |
GSM |
CC |
7.52.0 |
|
OATFW-7655 |
AT+CCED=0,8 always returns 99 for channel bit error rate. |
GSM |
OTHER |
7.52.0 |
|
OATFW-7675 |
<LAC> and <CellId> field value is not reported correctly through CCED response. |
GSM |
OTHER |
7.52.0 |
|
OATFW-7834 |
+WIND: 15 is not seen when there is a change in time zone. |
GSM |
OTHER |
7.52.0 |
|
OATFW-3758 |
When AT+CSSN=1,1 has been executed on AirPrime, the supplementary service notification for “additional incoming call forwarded” ( +CSSU: 10 ) is never received. |
GSM |
OTHER |
7.52.0 |
|
OATFW-4836 |
AT+CCED=0 leads to occasional reception of +CME ERROR: 30. |
GSM |
OTHER |
7.52.0 |
|
OATFW-7818 |
Stress testing AT+COPS=?, without waiting for response, leads to +CME ERROR 515 for all the AT commands including the AT command. |
GSM |
PLMN_SEL |
7.52.0 |
|
OATFW-3909 |
+CREG: 2 is not received on network loss. |
GSM |
RR |
7.52.0 |
|
OATFW-7686 |
SMS ADL callbacks not always received even if SMS is sent correctly. |
GSM |
SMS |
7.52.0 |
|
OATFW-4212 |
On sending the SMS again after changing the service type from GPRS to GSM (circuit switched),+CMS ERROR: 515 is received. |
GSM |
SMS |
7.52.0 |
|
OATFW-8019 |
Occasional AirPrime reset while sending SMS. |
GSM |
SMS |
7.52.0 |
|
OATFW-2476 |
<time> field of +CCFC is not displayed when <reason> is no reply. |
GSM |
SS |
7.52.0 |
|
OATFW-2573 |
Call waiting unsolicited responses (+CCWA ) are not received when the ongoing call has been put on hold. |
GSM |
SS |
7.52.0 |
|
OATFW-3698 |
AT+CCFC=0,4 does not erase unconditional call forwarding for data call and AT+CCWA=0,0 does not disable call waiting for data call. |
GSM |
SS |
7.52.0 |
|
OATFW-3701 |
Call Barring Service not working. |
GSM |
SS |
7.52.0 |
|
OATFW-3713 |
AT+CCFC returns incorrect call forward status. |
GSM |
SS |
7.52.0 |
|
OATFW-3757 |
Registration of Call Forwarding Supplementary service for all asynchronous services, using ATD command, leads to registration of the service for all tele-services. |
GSM |
SS |
7.52.0 |
|
OATFW-3826 |
Call waiting status, received with +CCWA indications, is incorrect. |
GSM |
SS |
7.52.0 |
|
OATFW-3828 |
AirPrime displays the connected line identification presentation information even if "COLP" is not provisioned. |
GSM |
SS |
7.52.0 |
|
OATFW-3887 |
Call waiting status, received in +CCWA: indication, is incorrect. |
GSM |
SS |
7.52.0 |
|
OATFW-3979 |
Certain + D indications are not received even when AT+D=1 has been issued. |
GSM |
SS |
7.52.0 |
|
OATFW-4023 |
Extra responses of activating call forwarding including that of data, fax are received along with correct response for speech for BS codes =17(Voice group calling service) or 18(Voice broadcast service). |
GSM |
SS |
7.52.0 |
|
OATFW-4053 |
Supplementary service notification for “forwarded MT call” (+CSSU: 0) are missing when enabled by AT+CSSN=1. |
GSM |
SS |
7.52.0 |
|
OATFW-7647 |
At times complete incoming USSD string is not shown with +D indication. |
GSM |
SS |
7.52.0 |
|
OATFW-3288 |
Microphone feedback in speaker may not change for some values of gain of AT+SIDET |
HWL |
AUDIO |
7.52.0 |
|
OATFW-3761 |
Wrong digital gain of the speaker in index received if the Gain set in dB mode. |
HWL |
AUDIO |
7.52.0 |
|
OATFW-7739 |
Audio quality may deteriorate when audio & GPS operations are preformed concurrently. |
HWL |
AUDIO |
7.52.0 |
|
OATFW-7935 |
The DTMF tone is played locally at speaker when the tone is sent using AT+VTS. |
HWL |
AUDIO |
7.52.0 |
|
OATFW-8024 |
AirPrime indicates to network that it supports AMR-Wideband (even though it doesn't). |
HWL |
AUDIO |
7.52.0 |
|
OATFW-2849 |
API adl_ioGetCapabilitiesList() returns incorrect number of GPIOs (one more than the actual number of GPIO pins available on the AirPrime). |
OTHER |
OAT |
7.52.0 |
|
OATFW-2875 |
adl_ioRead() retrieves incorrect GPIO level values after some GPIO write operations. |
OTHER |
OTHER |
7.52.0 |
|
OATFW-3168 |
API adl_ctxSuspend does not work. |
OTHER |
OTHER |
7.52.0 |
|
OATFW-7874 |
SPI_CS_N may sometimes be released early, leading to data loss (last byte of SPI data). |
OTHER |
OTHER |
7.52.0 |
|
OATFW-8188 |
With some specific SIM cards, SIM initialization may sometimes fail. |
SIM |
RESET |
7.52.0 |
|
OATFW-3225 |
Software watchdog is not functional. |
SYS |
OTHER |
7.52.0 |
|
OATFW-4313 |
When trying to put a GDB breakpoint in an Application using a low level interrupt, the breakpoint isn't reached and AirPrime restarts. |
SYS |
OTHER |
7.52.0 |
|
OATFW-4049 |
Can't select Band 6 (UMTS800) with AT+WUBS command. |
UMTS |
CELL_SEL |
7.52.0 |
|
OATFW-7661 |
Indicator control, +CIND, reports incorrect signal quality. |
UMTS |
MEASUREMENT |
7.52.0 |
|
OATFW-2878 |
Wrong TON of address for phone number may be received for AT+CLIP command. |
UMTS |
OTHER |
7.52.0 |
|
OATFW-4035 |
The value <Maximum bitrate DL> in sometimes not set correctly with AT+CGEQREQ command. |
UMTS |
OTHER |
7.52.0 |
6.2. Interface Changes
This section presents the interfaces that have been modified since Firmware 7.52.2.A5.
|
Comment |
|
|
AT+COPN |
The table containing the operators name has been updated as per latest TS.25 list (formerly, SE.13) dated September 19, 2016. |
7. Troubleshooting
For Open AT Developers, please refer to the Troubleshooting Guide available in Developer Zone before contacting customer support.
For AT developers, please contact customer service for support and debugging information.
8. Certification Description
|
GCF-CC |
NAPRD.03 |
ANATEL |
JRF/JPA |
OFTA |
|
|
SL8080T/SL8080BT |
v5.21 |
||||
|
SL8082T/SL8082BT |
v3.55 |
||||
|
SL8084T/SL8084BT |
v3.55 |
Yes |
Yes |
Yes |
9. Restrictions and Additional Information
This section presents additional information or restrictions that must be taken into account regarding Firmware 7.52.5.A5. Issues are sorted by alphabetical order of Impacted Domain.
|
Description (What/When) |
Impacted Domain |
Impacted Sub-Domain |
|
|
After software upgrade has been applied on AirPrime with AMS, +WDSF read command may return wrong <EraseInfo> information. |
AMS |
AMS |
|
|
OATFW-3060 |
Due to time-out, AT commands (like AT+COPS=?) issued over AMS may return ERROR. |
AMS |
AMS |
|
OATFW-4828 |
+WDSF read command may return wrong <EraseInfo> information after a firmware upgrade with AMS has been carried out. Even the firmware has been re-installed afterwards, wrong <EraseInfo> information is still available. |
AMS |
AMS |
|
OATFW-5042 |
A de-registered AirPrime in CGCLASS CG class cannot connect to the AMS server again, after it has been disconnected from the previous AMS connection. |
AMS |
AMS |
|
OATFW-8179 |
QoS setting is reset to the default, when GPRS bearer is started with a newly created PDP context. |
AT |
GPRS |
|
OATFW-2355 |
AT+WLCK doesn’t work for PS, PP and PC facilities. |
AT |
OTHER |
|
OATFW-3199 |
AT+WSVN does not change the IMEI SVN sent to the network |
AT |
OTHER |
|
OATFW-3774 |
"+WIND:7" indication is not received when SIM PIN is locked and PIN is not yet entered |
AT |
OTHER |
|
OATFW-4061 |
AirPrime indicates to network that it supports Fax (even though it doesn't). This is not expected to impact normal functioning of the AirPrime. |
AT |
OTHER |
|
OATFW-8138 |
Unsolicited responses +CDS or +CDSI may not be notified on AirPrime, when PDU SMS are sent to AirPrime continuously without any time delay. |
AT |
SMS |
|
OATFW-2303 |
The terminal response of the STK command (SEND SS) to the SIM doesn't contain additional information, including operation code and SS parameters. |
AT |
STK |
|
OATFW-4266 |
Stop playing an audio stream may fail. Occasionally, it could cause AirPrime to restart. |
AUDIO |
OTHER |
|
OATFW-5235 |
The API of the Internet plugin (wip_netGetOpts) may not work with the options: WIP_NET_OPT_IP_TTL, WIP_NET_OPT_IP_TOS, and WIP_NET_OPT_IP_FRAG_TIMEO. |
DATA |
OTHER |
|
OATFW-4570 |
The event of the Internet library plugin (WIP_CEV_ERROR) may not be triggered, if the activated PDP context of AirPrime has been deactivated with AT+CGACT=0. |
GPRS |
OTHER |
|
OATFW-8272 |
If a SMS is sent to AirPrime which has been powered off, this incoming SMS may be never received when AirPrime is powered on. |
GSM |
SMS |
|
OATFW-5419 |
Virtual UART (CMUX DLC) may not respond, if an incoming call is received when sleep mode has been enabled. |
DEVICE |
CMUX |
|
OATFW-5154 |
The state of RTS returned by ADL API (adl_portGetSignalState) is incorrect. |
DEVICE |
V24 |
|
OATFW-2384 |
The second A&D memory cell subscription of an undefined size could cause AirPrime to restart. |
FLASH |
OBJECTS |
|
OATFW-5241 |
The folders ("." and "..") cannot be displayed, when the contents of a File System is listed with the FS OBEX. |
FLASH |
OTHER |
|
OATFW-4829 |
When the T3321 timeout occurs during a GPRS detach procedure with the retransmission, AirPrime fails to perform the GPRS attach subsequently. |
GPRS |
OTHER |
|
OATFW-8235 |
AirPrime in CGCLASS A may not be able to setup a PPP dial up network successfully with some special SIMs. |
GPRS |
SESSION_MGT |
|
OATFW-3919 |
When a MO call is made to a 'busy' number, the busy tone doesn't stop even after ATH has been issued. |
GSM |
CC |
|
OATFW-4120 |
AirPrime may not be able to receive +WIND: 15 unsolicited response for NITZ information, if it is registered to a GSM-only cell at power up. |
GSM |
OTHER |
|
OATFW-3127 |
The start-up time of AirPrime is altered, as the firmware architecture has been revised. |
OTHER |
OTHER |
|
OATFW-5313 OATFW-5180 |
Stack overflow test does not trigger a reset & a backtrace. |
RTX |
OTHER |
|
OATFW-4851 |
Timer expiration of application tasks with different priorities may lead to failure of event handling. |
RTX |
OTHER |
|
OATFW-2835 |
SIM initialization time can be very long and may vary from one SIM to other. |
SIM |
OTHER |
|
OATFW-4342 |
Applying AT+CSIM command on non-existing SIM file-ID may lead AirPrime return wrong response. |
SIM |
OTHER |
|
OATFW-4577 |
+CME ERROR: 13 is not reported after a SIM is removed |
SIM |
OTHER |
Tags
Related items
AT Commands Interface Guide for Firmware 7.52This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways.
Firmware package 7.52.5.A5X-modem & exe file for Firmware 7.52.5.A5 for AirPrime SL808xT
Open AT Application FrameworkThe Open AT Application Framework is a complete software package for embedded M2M application development. It offers a range of readily available building blocks which accelerate the application development process, allowing you to bring connected products to market faster and reduce development costs.

Open AT firmware Release Notes HistoryOpen AT Firmware release notes includes : Firmware 7.54.2.A1 (SL808xT/ BT) Firmware 7.54.0.A1 (SL808xT/ BT) Firmware 7.53.1.A1 (SL808xT/ BT) Firmware 7.52.5.A5 Firmware 7.52.2.A5 Firmware 7.52.1.A5 (SL808xT) Firmware 7.52.0.A1 (Q2698) Open AT Frimware 7.52 Open AT Firmware 7.51 Open AT Firmware 7.50 Open AT Firmware 7.4a Open AT Firmware 7.47.6_V2 Open AT Firmware 7.47.6 Open_AT_Firmware 7.47.4 Open_AT_Firmware 7.47 Open_AT_Firmware 7.46 Open_AT_Firmware 7.45.5 Open_AT_Firmware 7.45.1 Open_AT_Firmware 7.45 Open_AT_Firmware 7.44 Open_AT_Firmware 7.43 Open_AT_Firmware 7.42 Open_AT_Firmware 7.4 Open_AT_Firmware 7.3a Open_AT_Firmware 7.3 Open_AT_Firmware 7.2a Open_AT_Firmware 7.2