Search resources

Document stating the compliance of AirPrime products towards Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

Document stating the compliance of AirLink and AirPrime products toward California Regulation on Chemicals Proposition 65.

This application note provides detailed information about the ASN1 coder used with the eCall In-Band Modem Library. The ASN1 coder enables customers to create the binary format of MSD needed by the IVS to be sent during eCall process to PSAP.

Open AT Firmware release notes includes  :     Firmware 7.54.2.A1 (SL808xT/ BT)     Firmware 7.54.0.A1 (SL808xT/ BT)     Firmware 7.53.1.A1 (SL808xT/ BT)     Firmware 7.52.5.A5      Firmware 7.52.2.A5      Firmware 7.52.1.A5 (SL808xT)      Firmware 7.52.0.A1 (Q2698)      Open AT Frimware 7.52      Open AT Firmware 7.51      Open AT Firmware 7.50      Open AT Firmware 7.4a      Open AT Firmware 7.47.6_V2      Open AT Firmware 7.47.6      Open_AT_Firmware 7.47.4      Open_AT_Firmware 7.47      Open_AT_Firmware 7.46      Open_AT_Firmware 7.45.5      Open_AT_Firmware 7.45.1      Open_AT_Firmware 7.45      Open_AT_Firmware 7.44      Open_AT_Firmware 7.43      Open_AT_Firmware 7.42      Open_AT_Firmware 7.4      Open_AT_Firmware 7.3a      Open_AT_Firmware 7.3      Open_AT_Firmware 7.2a      Open_AT_Firmware 7.2

List of available Developer Studio release notes: Developer Studio 5.3.1 Developer Studio 5.3 Developer Studio 5.2 Developer Studio 5.1 Developer Studio 5.0 Developer Studio 4.1.1 Developer Studio 4.1 Developer Studio 4.0 Developer Studio 3.6 Developer Studio 3.5 Developer Studio 3.4 Developer Studio 3.2 Developer Studio 2.3.2

Mobile devices using 3G and LTE are equipped with a second receive antenna for improved performance. This second antenna is required for receive diversity and MIMO. These concepts, with their associated benefits, requirements and test possibilities, are described in this Application Note in a Q&A format.

This document describes the features and specifications of the AirPrime Q26 Carrier Board and provides you with the information required to integrate the AirPrime Q26 Carrier Board into your products.

This Application Note presents the steps to set up a PPP connection in Linux Operating System using the Sierra Wireless embedded module. As Windows® and Linux® have different procedures for creating a PPP connection, this application note provides details about the process for Linux environment. The steps to create the connection are well supported with images to graphically depict those steps.

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways.

This document lists new features and bug fixes integrated in Developer Studio 3.6 release

This document summarizes the compatibility between AT commands supported by the AirPrime Q2686x and Q2687x with those supported by the AirPrime HL6528x embedded modules.

The purpose of this document is to provide Sierra Wireless customers with a full description of the APIs associated with the OS 6.52.

Release Notes for Extended AT Application 1.3.1 for an AirPrime or AirLink products

AirPrime - USB driver for Windows 7 &  8.1   (SL6087, Q26 series, WMP series)