In embedded designs CMUX is a popular mechanism to use where an external PPP dial-up connection is used rather than the onboard IP stack. This allows the application firmware to have the connection up while still performing other operations on the unit such as querying network status, etc. This video walks through the tools that can be used on a Linux system to start CMUX, and its operation.

Several of the Qualcomm based modules that Sierra Wireless produce have the ability to store multiple firmware and carrier (i.e. Vodafone, Verizon, Docomo, etc.) configuration files. This video shows how to manage and switch between these firmware and carrier configuration files.

The Qualcomm-based modules are able to be upgraded and downgraded between firmware versions and across carrier configuration files. This video walks through how to perform this operation using the QMI Lite SDK, which is a standalone application, using an MC74 module. It is applicable to all of our EM, MC, RC and WP families of units.

The Qualcomm based modules may be upgraded and downgraded between firmware versions and across carrier configuration files. This video walks through how to perform this operation using the QMI SDK on an EM7565. It is applicable to all of our EM, MC, RC and WP families of units.

This article provides instructions for configuring an AirLink GX400, GX/ES440, GX/ES450, LS300, LX60 or RV50/RV50X and a Cisco 881 router for WAN Failover.

This tutorial explains how to set up ALEOS AF hardware.

This tutorial video shows how to easily upgrade the firmware of any AirPrime wireless module over the air with AirPrime Management Services.