Provides an application note listing the capacitors and inductors in the BC127.

This document describes the steps needed to rework the AirPrime BC127 and set it up for conducted RF tests.

This application note provides all necessary information to perform Firmware Over-The-Air (FOTA) and Software Over-The-Air (SOTA) on Sierra Wireless AirPrime WP Series modules. This application note applies to all products in the AirPrime WP8 and WP7 Series.

The Sierra Wireless MDM9X15 and MDM9X30 family of modems support carrier switching. This is a feature where the same modem can be used with different carriers from different geographies by downloading and activating the correct FW package for the carrier and modem. This document explains how customers can match a FW package with the correct supported modem.

This application note defines the different QoS levels and how they are set up and managed in LTE networks to use on AirPrime MC/EM74xx embedded modules.

This document provides a hardware reference design for HL6528 and HL6528-G, interfacing to a generic 3.3V host CPU or microcontroller.

Contains the Module Application Note-MT3337 document.

Contains the Pin-compatibility Application Note.

Contains the Module Application Note-MT3339 document.

Contains the Module Application Note-MT3333 document.

This document describes the network interface configuration on Linux and Windows when an AirPrime HL75xx embedded module is used.

This application note describes how to design a Dual SIM solution without using the SIM detection pin of the module.

The AirPrime HL7588 supports up to 4 PDN connections. This Technical Note gives examples/steps to make multiple data connections with different APNs. The customer can use the same method to establish multiple PDN connections on different networks.

The AirPrime EM and MC74xx modules support the AUTO-SIM feature wherein the module will select the correct FW+ carrier PRI to use with the detected SIM. This feature is intended for use with the module when the host application does not wish to perform management of FW image switching.

AirPrime EM74xx modules support dual SIMs or 2 physical slots. This technical note provides information regarding the dual SIMs functionality.

The Sierra Wireless AirPrime MC73xx and MC74xx modules can enumerate in different states. It is imperative for host applications to be aware of the different states and handle them appropriately. This document covers the Qualcomm MDM9x15 and MDM9x30-based MC73xx and MC74xx modules. The document explains the different enumeration states, the reasons for entering said states, and how the host can exit these states.

Contains an application note describing how to enable and configure IAP on Melody.

This project contains the MelodySmart sample application and libraries for Android. It allows any Android 4.3+ device to communicate with BlueCreation's BC118/BC127 range of products over Bluetooth Low Energy.

Contains an application note describing the update procedure for upgrading the BC119 from MelodySmart v3.4.x to V3.7.0+.

Contains an application note describing how to program the BC118 using a CNS10020V3A.