Programming BC118 Development Board using CSR BlueFlash
- Mar 27, 2017
- Author: Sierra Wireless
- Version: 1
Contains an application note describing how to program the BC118 using a CNS10020V3A.
The BC118 can be programmed using any CSR USB<->SPI converter and a level translator, if applicable.
Using a CNS10020V3A, however, is somewhat complicated due to the proprietary cable connection on the board. The only way to use the CNS10020V3A to program a
BC118 DisKit, is to use the USB<->SPI as part of the CSR CNS12016v1A development kit, or similar, that exposes the SPI and PIO/SPI select PIOs.
The attached application note describes how to program the BC118 using a CSR CNS12016v1A.