Search resources

AirPrime EM7590 Declaration of European Union RoHS Compliant Product

AirPrime EM7590 RED (Radio Equipment Directive) Compliance Statement

This is the Sierra Wireless RC76xx Release 9.0 Customer Release Notes download.

This page describes in detail the components included with the Firmware Release, how to build your own custom device image based on Release 16.3 components and how to download it on your product.

Contains methods that can be used to install pre-built image on RC76xx modules.

This video shows how to start a data session that a Linux system is able to use for data communications over its USB link when connected to a 3G or LTE network.

When using the HL78 module, for network or application problems it may be necessary to be view the internal operation of the unit. To do this logging from its debug port is required. This video shows how to carry out this logging, resulting in a file that can be sent back to Sierra Wireless for analysis.

This video shows how to use AT commands to create a raw TCP session from an HL78 module UART/USB interface through to a server with an open port/public IP address. The same commands are employed across the HL and RC families of products.

Within mobile networks there are different ways of being attached to a 3GPP PLMN (public land mobile network). This video explains the different types of attach statuses and how they can affect and influence data connections you are using.

The Qualcomm-based modules are able to be upgraded and downgraded between firmware versions and across carrier configuration files. This video walks through how to perform this operation using the QMI Lite SDK, which is a standalone application, using an MC74 module. It is applicable to all of our EM, MC, RC and WP families of units.

The Qualcomm based modules may be upgraded and downgraded between firmware versions and across carrier configuration files. This video walks through how to perform this operation using the QMI SDK on an EM7565. It is applicable to all of our EM, MC, RC and WP families of units.

In some applications, the ability to know the location of the unit without powering up a GPS is useful. Using the method shown in this video, an application can perform a geolocation operation through the use of a pure cell ID. This is demonstrated using the WP7607, which is a 2G/3G/4G module. However, any module can be used.

This video walkthrough demonstrates how to retrieve NMEA frames from modules like the EM/MC74. All required AT commands are reviewed and demonstrated.

From a UE (user equipment, so a handset/module) perspective there are a number of parameters that are critical to its operation. This video explains what these numbers are, where they come from and how they are used. It is applicable to all UE's on the market.