Search resources

If the AirLink device you are updating has ALEOS version 4.3.5 or older, use this application note to update the device to the latest firmware. 

AirLink ES440 EOL (End of Life) Notice

This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways.

This document provides full description of the APIs associated with the Open AT Application Framework OS

This document describes the AirPrime AR and WP Series Development Kit and how integrates with the AirPrime AR and AirPrime WP710x-G (with variants WP7100-G, WP7102-G and WP7104-G) series of embedded modules, through a socket-up board equipped with a mechanical socket. It describes the different interfaces within the AirPrime AR and WP Series Development Kit and provides schematics to facilitate the user’s understanding and configuration of the development kit for their own use.

This article describes the Tracker application and provides the Tracker User Guide.

This article provides the configuration guide for using the Intergraph CAD/AVL application with the oMG.

The attached document describes how to configure a LAN-to-LAN IPsec VPN tunnel between an oMG R3 and a Cisco ASA5505, using RSA keys and digital certificates for authentication.

The ACETECH AVI is an Advanced Vehicle Informatics (AVI) module that combines GPS, OBDII, and accelerometer data to collect information on location, engine status, driver dashboard status, speed and directional forces including acceleration, deceleration and cornering. The attached document provides information on installing, configuring, and troubleshooting the ACETECH AVI with an oMG.

The attached document describes how to configure a LAN-to-LAN IPsec VPN tunnel between an oMG R3 and a Cisco ASA5505, using PSK for authentication.

This article provides the oMG 500 Quick Setup Guide.

Latest Linux QMI SDK Release Note 1.01

Latest Linux QMI SDK Application Developer Guide 1.20

This article provides the oMG 2000 Quick Setup Guide.