Search resources

NCC Certificate of AirPrime SL6087 allowing import in Taiwan.

NCC Certificate of AirPrime SL5011 allowing import in Taiwan.

Document stating the compliance of AirPrime SL5010 and SL5011 towards IC.

Document stating the compliance of AirPrime SL5010 and SL5011 towards FCC.

Document stating the compliance of AirPrime Q2687 towards Australian Communications and Media Authority (ACMA)’s Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 made under section 407 of the Telecommunications Act. This allows Sierra Wireless to affix the A-Tick mark on the AirPrime Q2687 label.

This document describes high-level application and hardware interface requirements for integrating the MC8705 into a host product.

This document provides a reference for using HIP (Host Interface Protocol) and CnS (Control and Status language) when developing applications for use on AirPrime UMTS MC-series embedded modems (MC8xxx).

This document describes high-level application and hardware interface requirements for integrating the MC8795V into a host product.

This guide addresses issues that affect the integration of AirPrime MC87xx and MC57xx embedded modules into host products, and includes design recommendations for the host products.

This document describes the features and specifications of the AirPrime MC8790V module and provides you with the information required to integrate the AirPrime MC8790V into your products.

This document describes the features and specifications of the AirPrime MC5728V and provides you with the information required to integrate the AirPrime MC5728V into your products.

This application note describes how to design a dual SIM solution. This function is used to switch between two SIMs. Two GPIOs are used to control the hardware switching between two SIMs.

Location based services (LBS) is a global positioning system (GPS) location feature supported by some carriers and networks.

This document describes and illustrates the most common hostdevice message exchanges that occur in standard OMA-DM operations on the Sprint network.

AT Command Parser source code demonstrates and provides re-usable code showing how to subscribe and parser responses to both unsolicted and sent AT commands.

This guide is for original equipment manufacturers (OEMs) and other integrators who are using the Sierra Wireless MC5728V Mini Card modem but are not using the Watcher™ enabling software provided for it by Sierra Wireless.

This document describes important signal considerations regarding MDL_RESET_N and W_DISABLE# signals of the MC5728V MiniCard module, and also USB enumeration and power-up timing.

This document describes how to install and use the Product Support Tool from Sierra Wireless.

This guide provides a description and reference for using the Host Interface Protocol (HIP) and Control and Status language (CnS) on the MC5728V Mini Card modem. These are proprietary protocols for managing the control and status of the modem.