Search resources

MC8704 Telstra TA letter

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Measured current consumption  Different modules' operating modes Different scenarios.  This application note will be useful for those customers who want to obtimize the size and the capacity of the battery to be used.

This document describes the features and specifications of the AirPrime MC8704 module and provides you with the information required to integrate the AirPrime MC8704 into your products.

Q2698 GCF cert

This Application Note describes a method to wake up an embedded module by motion detection through the use of a 3 axis accelerometer. Generally, when an AirPrime embedded module is not needed in working mode, the best way to save energy is to enter into ALARM mode. It can then be woken up by programming an RTC interrupt.  However, in specific applications, it can be useful to wake up the AirPrime module when a movement is detected. This application note shows a method to implement this mechanism.

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Li-Polymer battery used Possible drops of the battery voltage below its over discharge threshold (~2.8V) Only a DC voltage source available to charge the battery (impossible to connect an external charger)

MC5728V Sprint TA (UART version)

MC7304 CE DoC

MC9090 VZW TA letter

This FTP over SSL (FTPS) application note shows how to interact with an FTPS server through GPRS to perform an FTP PUT and FTP READ action.

Latest USB drivers Linux DIP Release Note 3.6_1.7.50

Below is the list of all the available FW packages MC7700 ATT approved firmware SWI9200X 03.05.29.03 DIP MC7700 ATT approved firmware SWI9200X 03.05.29.03 QMI MC7700 Bell Telus Rogers approved firmware SWI9200X 03.05.29.03 DIP MC7700 Bell Telus Rogers approved firmware SWI9200X 03.05.29.03 QMI MC7700 Bell Rogers Telus PTCRB approved FW 3.5.20.5 DIP MC7700 Bell Rogers Telus PTCRB approved FW 3.5.20.5 QMI MC7700 ATT PTCRB approved FW 3.5.20.3 DIP MC7700 ATT PTCRB Approved FW 3.5.20.3 QMI MC7700 NTT approved FW 3.5.19.00A DIP MC7700 NTT approved FW 3.5.19.00A QMI MC7700 Bell PTCRB approved FW 3.5.14.0 DIP MC7700 Bell PTCRB approved FW 3.5.14.0 QMI  

Below is the list of all the available FW packages : MC5728V Sprint approved FW 1.56.01 MC5728 Verizon FW 1 56 package

MC7350 IC cert

SL5011 Sprint TA letter (UART version)

The purpose of this application note is to provide a first level of suitable information to select and implement a power supply solution for a GSM application.

This Application Note describes methods and services through which an application will be able to perform a Geolocation operation through the use of purely CellID’s without the need for GPS.

Full installer for Open AT Application Framework 2.52.1.A5 for AirPrime SL808xT

This Application Note describes the hands-free solution available on AirPrime WS6318 module. A brief explanation of the hands-free solution is followed by a detailed presentation covering the overview, block schematic, parameters explanation, tuning guidelines, and default parameters.

This application note explains how to set up an SSL-secured communications channel with an Apache server.