Search resources

This document lists new features and bug fixes integrated in Developer Studio 3.3 release

This file is the latest 3D model release for AirPrime WS6318 product.

The Open AT Application Framework is a complete software package for embedded M2M application development. It offers a range of readily available building blocks which accelerate the application development process, allowing you to bring connected products to market faster and reduce development costs.

This document lists new features and bug fixes integrated in Developer Studio 3.2 release

This document describes the features and specifications of the AirPrime WS6318 module and provides you with the information required to integrate the AirPrime WS6318 into your products.

Developer Studio 3.1.0 release note

GPS receivers of Sierra Wireless AirPrime modules can be connected to a passive antenna (which should be physically located very close to the unit) or a remote active antenna containing an LNA, which will both improve SNR and compensate for any cable/insertion losses. This application note describes the use of the integrated GPS active antenna powering function when available, and how to design an external powering circuit where required.

This document presents guidelines for the industrial assembly of an AirPrime WS6318 Intelligent Embedded Module on an application.

Developer Studio 3.0.0 release note

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Measured current consumption  Different modules' operating modes Different scenarios.  This application note will be useful for those customers who want to obtimize the size and the capacity of the battery to be used.

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Li-Polymer battery used Possible drops of the battery voltage below its over discharge threshold (~2.8V) Only a DC voltage source available to charge the battery (impossible to connect an external charger)

The purpose of this application note is to provide a first level of suitable information to select and implement a power supply solution for a GSM application.

This Application Note describes methods and services through which an application will be able to perform a Geolocation operation through the use of purely CellID’s without the need for GPS.

This Application Note describes the hands-free solution available on AirPrime WS6318 module. A brief explanation of the hands-free solution is followed by a detailed presentation covering the overview, block schematic, parameters explanation, tuning guidelines, and default parameters.

This page contains the release notes of the Open AT Developer Studio 2.3.2

This document provides guideline for designing applications based on the HiLoNC V2 product. Recommendations are provided to maximize the efficient migration from the AirPrime WISMO2x8 to the HiLoNC V2.  This document also defines the differences between both products and provides solutions.  This document does not cover all the specifics and characteristics of the HiLoNC V2.

This document is the customer release notes for Firmware R32 of the AirPrime WS6318 Embedded Module.

Release Notes for Location Library 1.5.2 for an AirPrime or AirLink products

This document describes the features and specifications of the AirPrime WISMO228 module and provides you with the information required to integrate the AirPrime WISMO228 into your products.