Search resources

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

This Application Note presents the steps to set up a PPP connection in Linux Operating System using the Sierra Wireless embedded module. As Windows® and Linux® have different procedures for creating a PPP connection, this application note provides details about the process for Linux environment. The steps to create the connection are well supported with images to graphically depict those steps.

OMA-DM IMEI Sync (ODIS) is an AT&T service in which devices report host device identification information to the network, enabling AT&T to easily identify each device in the field.  This document provides guidelines for the service.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

This application note provides all necessary information to perform Firmware Over-The-Air (FOTA) on Sierra Wireless AirPrime HL Series modules.  This application note applies to all products in the AirPrime HL6, HL7, and HL8 Series.

This technical note describes the GNSS issue that could be observed in very rare cases on HL8548-G and HL8549-G modules, and describes a workaround to overcome this issue.

Latest Android 6.0 RIL Software

Latest Android 6.0 RIL Release Note

Latest Android 6.0 RIL Release Note

Latest Android 6.0 RIL Software

Latest Android 6.0 RIL Release Note

Latest Android 6.0 RIL Software

Latest Android 5.1 RIL Release Note

Latest Android 5.1 RIL Software

This document is the Firmware 5.5.8.0 customer release note of the AirPrime HL854xx.

Available AirPrime HL8548x Firmware Release Notes: AirPrime HL8548x Firmware 5.5.26.0 Customer Release Note AirPrime HL8548x Firmware 5.5.25.0 Customer Release Note AirPrime HL8548x Firmware 5.5.24.3 Customer Release Note AirPrime HL8548x Firmware 5.5.24.2 Customer Release Note AirPrime HL8548x Firmware 5.5.24.0 Customer Release Note AirPrime HL8548x Firmware 5.5.22.0 Customer Release Note AirPrime HL8548x Firmware 5.5.18.0 Customer Release Note AirPrime HL8548x Firmware 5.5.16.0 Customer Release Note AirPrime HL8548x Firmware 5.5.14.0 Customer Release Note

Latest HL8549 Firmware

Learn how to create communication between AirVantage and Arduino-based system equiped with an AirPrime HL wireless module.

Archive contain CAD files to ease customer hardware design: Pcb file from PADS version 9.3 (CAD software) Ascii file from PADS version 2005.2 (CAD software) Gerber files (Manufacturing files “CAM software”) DXF file (Mechanics file)

This document describes the AirPrime HL Series Development Kit (board version 1400897-I) and how it integrates with the AirPrime HL6528x, HL75xx and HL85xxx series of embedded modules via a specific Snap-in connector.