Search resources

This tutorial video explain how to handle call and GPRS services of GSM related services of Open AT with a dive into the Open AT APIs.

This tutorial video explain how to manage bearers and IP address with the Internet Library for Open AT.

This tutorial video demonstrates how to manage Open AT application download and execution onto an AirPrime module. The tutorial includes a live demonstration using Developer Studio.

This tutorial video demonstrates how to handle the different storage areas (A&D, Flash Object and Fiel system) available with the OS for an Open AT application.

This tutorial video presents how to handle the interrupt services included with the OS services of Open AT. 

This tutorial video demonstrates how to handle TCP and UDP sockets, FTP client, HTTP client, SMTP client POP3 client and PING services within the Internet library of Open AT.

This tutorial video provides an introduction of Developer Studio main feature set to manage Open AT application building, test and debug.

This tutorial video provides an understanding of timers usage, TCU usage and Watchdog services of OS Services for Open AT.

This tutorial video presents OS programming concept with Open AT.  

This tutorial video provides an understanding of inter-task communications and synchronization mechanisms of Open AT.

This tutorial presents how to handle compilers to manage Open AT program compilation with Developer Studio.

This tutorial video provides an understanding of the OS implementation, addressing the real time aspect of the Open AT, its multi-tasking capability and context service.

This tutorial video explain how to handle channels implemented in the OS.

This tutorial video demonstrates how to create a new Open AT project to build an application based on a sample application. The tutorial includes a live demonstration using Developer Studio.

The Open AT Source code example allows to use the file system to store application data using AT commands.

Check out this section of AirVantage User Manual to know how to connect a wireless device to AirVantage M2M Cloud. 

Devices on the management server can be viewed and managed through the web interface. This application note explains how to view details, and how to manage the units and jobs assigned to them including firmware and software upgrades. It also describes module firmware behavior and specific points around the implementation in the unit and server, plus limitations of both with good practice recommendations.

This application note describes how to use SMTP over a secured socket to send an e-mail. The application uses the GPRS interface for the SMTP transfer.

This application note describes the process and steps required to register and add units to the APMS server to make them available for use by a customer. This application note walks a user through the initial steps to getting up and running. If problems are encountered beyond this, support should be sought from your usual support channel.

Application Description This application is intended to show an AirLink FX programmable modem, in conjunction with the Ethernet X-card, to operate as an internet gateway allowing a PC to be plugged into it through its Ethernet port and then surf the internet. The Open AT code includes: - A DHCP server to automatically allocate IP address to the computers connected on the LAN. - A web server that prompts an HTTP page to configure the APN and related username and password.