Search resources

This document is the Firmware 2.3.10 customer release note of the AirPrime HL6528RDx embedded module.

Latest HL6528RDx Firmware

This document describes the features and specifications of the AirPrime Q26 Carrier Board and provides you with the information required to integrate the AirPrime Q26 Carrier Board into your products.

This Application Note presents the steps to set up a PPP connection in Linux Operating System using the Sierra Wireless embedded module. As Windows® and Linux® have different procedures for creating a PPP connection, this application note provides details about the process for Linux environment. The steps to create the connection are well supported with images to graphically depict those steps.

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

This document is the Firmware 2.2.5 customer release note of the AirPrime HL6528RDx embedded module.

This application note provides all necessary information to perform Firmware Over-The-Air (FOTA) on Sierra Wireless AirPrime HL Series modules.  This application note applies to all products in the AirPrime HL6, HL7, and HL8 Series.

This document is the Firmware 2.1.4.1 customer release note of the AirPrime HL6528RDx embedded module.

Latest HL6528RDx Firmware

Latest HL6528RDx USB drivers

This document is the Firmware 1.10.0 customer release note of the AirPrime HL6528RDx.

This document is the Firmware 1.11.0 customer release note of the AirPrime HL6528RDx.

Latest HL6528RDx Firmware

Archive contain CAD files to ease customer hardware design: Pcb file from PADS version 9.3 (CAD software) Ascii file from PADS version 2005.2 (CAD software) Gerber files (Manufacturing files “CAM software”) DXF file (Mechanics file)

This document describes the AirPrime HL Series Development Kit (board version 1400897-I) and how it integrates with the AirPrime HL6528x, HL75xx and HL85xxx series of embedded modules via a specific Snap-in connector.

This is the CE DoC for HL6528RD confirming compliance towards R&TTE Directive 1999/5/EC