Search resources

This page contains the release notes of the Open AT Developer Studio 2.3.2

Devices on the management server can be viewed and managed through the web interface. This application note explains how to view details, and how to manage the units and jobs assigned to them including firmware and software upgrades. It also describes module firmware behavior and specific points around the implementation in the unit and server, plus limitations of both with good practice recommendations.

This application note describes how to use SMTP over a secured socket to send an e-mail. The application uses the GPRS interface for the SMTP transfer.

This application note describes the process and steps required to register and add units to the APMS server to make them available for use by a customer. This application note walks a user through the initial steps to getting up and running. If problems are encountered beyond this, support should be sought from your usual support channel.

Application Description This application is intended to show an AirLink FX programmable modem, in conjunction with the Ethernet X-card, to operate as an internet gateway allowing a PC to be plugged into it through its Ethernet port and then surf the internet. The Open AT code includes: - A DHCP server to automatically allocate IP address to the computers connected on the LAN. - A web server that prompts an HTTP page to configure the APN and related username and password.

This book will guide you through the working of Open AT with detailed step-by-step instructions. This book is also the support of the Open AT training organized regularly by Sierra Wireless, allowing developers to easily discover the world of Open AT.

This Application Note describes the general structure of the Real Time Operating System implemented in Sierra Wireless modules, the RTOS features extended to developers and their restrictions, limitations and best practices to be followed when using the RTOS features.

AT Command Parser source code demonstrates and provides re-usable code showing how to subscribe and parser responses to both unsolicted and sent AT commands.