Search resources

Document stating the compliance of AirPrime products towards Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

Document stating the compliance of AirLink and AirPrime products toward California Regulation on Chemicals Proposition 65.

Open AT Firmware release notes includes  :     Firmware 7.54.2.A1 (SL808xT/ BT)     Firmware 7.54.0.A1 (SL808xT/ BT)     Firmware 7.53.1.A1 (SL808xT/ BT)     Firmware 7.52.5.A5      Firmware 7.52.2.A5      Firmware 7.52.1.A5 (SL808xT)      Firmware 7.52.0.A1 (Q2698)      Open AT Frimware 7.52      Open AT Firmware 7.51      Open AT Firmware 7.50      Open AT Firmware 7.4a      Open AT Firmware 7.47.6_V2      Open AT Firmware 7.47.6      Open_AT_Firmware 7.47.4      Open_AT_Firmware 7.47      Open_AT_Firmware 7.46      Open_AT_Firmware 7.45.5      Open_AT_Firmware 7.45.1      Open_AT_Firmware 7.45      Open_AT_Firmware 7.44      Open_AT_Firmware 7.43      Open_AT_Firmware 7.42      Open_AT_Firmware 7.4      Open_AT_Firmware 7.3a      Open_AT_Firmware 7.3      Open_AT_Firmware 7.2a      Open_AT_Firmware 7.2

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

This Application Note presents the steps to set up a PPP connection in Linux Operating System using the Sierra Wireless embedded module. As Windows® and Linux® have different procedures for creating a PPP connection, this application note provides details about the process for Linux environment. The steps to create the connection are well supported with images to graphically depict those steps.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

AirPrime - USB driver for Windows 7 &  8.1   (SL6087, Q26 series, WMP series)

Open AT Application Framework release Notes includes :     Open AT Application Framework 2.52.1.A5 (SL808xT)      Open AT Application Framework 2.52.0.A1 (Q2698)      Open AT Application Framework 2.52      Open AT Application Framework 2.51      Open AT Application Framework.2.37.6      Open AT Application Framework 2.37.4      Open AT Application Framework 2.37      Open AT Application Framework 2.36      Open AT Application Framework 2.35.5      Open AT Application Framework 2.35      Open AT Application Framework 2.34      Open AT Application Framework 2.33      Open AT Application Framework 2.32      Open AT Application Framework 2.31      Open AT Application Framework 2.30      Open AT Application Framework 2.21      Open AT Application Framework 2.20      Open AT Application Framework 2.12      Open AT Application Framework 2.11      Open AT Application Framework 2.10      Open AT Application Framework 2.02a

DWLWin is a WIN32 application compatible with Microsoft Windows 2000 and XP. DWLWin's graphical user interface provides a convenient way to configure and monitor download operations in a single wireless module. For production purposes, its automation interface enables simultaneous downloads in several modules connected on multi-port serial interfaces.

This application note presents the recovery mechanism of the Open AT Application Framework. The goal of the mechanism is to avoid infinite and uncontrolled reset loops in the firmware.

This application note describes how to perform voice over IP using PCM (for 3G modules) and AMR (for 2G modules).

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Measured current consumption  Different modules' operating modes Different scenarios.  This application note will be useful for those customers who want to obtimize the size and the capacity of the battery to be used.

This Application Note describes a method to wake up an embedded module by motion detection through the use of a 3 axis accelerometer. Generally, when an AirPrime embedded module is not needed in working mode, the best way to save energy is to enter into ALARM mode. It can then be woken up by programming an RTC interrupt.  However, in specific applications, it can be useful to wake up the AirPrime module when a movement is detected. This application note shows a method to implement this mechanism.

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Li-Polymer battery used Possible drops of the battery voltage below its over discharge threshold (~2.8V) Only a DC voltage source available to charge the battery (impossible to connect an external charger)

This FTP over SSL (FTPS) application note shows how to interact with an FTPS server through GPRS to perform an FTP PUT and FTP READ action.

The purpose of this application note is to provide a first level of suitable information to select and implement a power supply solution for a GSM application.

This Application Note describes methods and services through which an application will be able to perform a Geolocation operation through the use of purely CellID’s without the need for GPS.

This application note explains how to set up an SSL-secured communications channel with an Apache server.