Search resources

Document stating the compliance of BC127 towards IC.

The Certificate of Broadcasting and Communication Equipments for the BC127.

Document stating the compliance of BC127 DSS towards FCC.

Type Certificate of BC127 allowing import and usage of BC127 in Japan. This allows Sierra Wireless to affix the Japan mark on the BC127 label.

Provides a USB Demo App which is a 32-bit Windows application that gives you the ability to send commands via USB to Melody 6 (or 5.8RC4 onwards).

Contains the certification data for the BC127.

Contains an application note describing the BC127 antenna layout requirements.

Contains an application note providing power measurement values for a BC127 running Melody Audio 5.7 RC 8, and describes the test setup under which these values were obtained.

Latest version of the Aptx/cVc Demo License Updater. This tool loads a Bluetooth address and a demo license of APTX/CVC on the BC127 module. 

Contains an application note describing how to use the Melody Device Firmware Upgrade Tool.

Contains an application note describing how to enable and configure IAP on Melody.

Provides a user manual describing the BC127-DISKIT-001 (Discovery Board).

Contains an application note describing how to program the BC127 Development Board.

This project contains the MelodySmart sample application and libraries for Android. It allows any Android 4.3+ device to communicate with BlueCreation's BC118/BC127 range of products over Bluetooth Low Energy.

Contains an application note describing the relevant audio interface settings for Melody as well as the full set of I2S configuration parameters.

Latest tool to generate a custom BLE database for Melody 6.

This example uses an analog input to measure button presses then sends the appropiate commands to an BlueCreations.com BC127 bluetooth module that is running Melody Audio v6 via Serial. It also uses HID to do screen unlock and app switching of a USB OTG connected tablet

Contains an application note describing how to verify the Melody Audio I2S interface functionality.

Contains the BC127 Upgrade Tool.

Contains an application note describing configurations to reduce power consumption on Melody.