Search resources

Developer Studio 3.1.0 release note

Release Notes for OS 6.52 for an AirPrime or AirLink products

Release Notes for Location Library 1.4.6 for an AirPrime or AirLink products

Release Notes for Location Library 2.0 for an AirPrime or AirLink products

GPS receivers of Sierra Wireless AirPrime modules can be connected to a passive antenna (which should be physically located very close to the unit) or a remote active antenna containing an LNA, which will both improve SNR and compensate for any cable/insertion losses. This application note describes the use of the integrated GPS active antenna powering function when available, and how to design an external powering circuit where required.

This application note presents the recovery mechanism of the Open AT Application Framework. The goal of the mechanism is to avoid infinite and uncontrolled reset loops in the firmware.

This document describes how to set up the SL Series Mechanical Socket Development Kit (board version 1400746-B) with an AirPrime SL Series embedded module (SL6087, SL808x, SL809x and SL5011).

Developer Studio 3.0.0 release note

Release Notes for Location Library 2.0 for an AirPrime or AirLink products

This application note describes how to perform voice over IP using PCM (for 3G modules) and AMR (for 2G modules).

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Measured current consumption  Different modules' operating modes Different scenarios.  This application note will be useful for those customers who want to obtimize the size and the capacity of the battery to be used.

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Li-Polymer battery used Possible drops of the battery voltage below its over discharge threshold (~2.8V) Only a DC voltage source available to charge the battery (impossible to connect an external charger)

The purpose of this application note is to provide a first level of suitable information to select and implement a power supply solution for a GSM application.

Full installer for Open AT Application Framework 2.52.1.A5 for AirPrime SL808xT

This application note explains how to set up an SSL-secured communications channel with an Apache server.

This page contains the release notes of the Open AT Developer Studio 2.3.2

This document provides Sierra Wireless customers with a full description of the AT Commands for Location Services, available when using compatible GPS receiver in combination with an AirPrime Intelligent Embedded Module.

Open AT® Application Framework 2.50.0.A1 package contains: Firmware 7.50.0.A1 Open AT OS 6.50.0.A1 Developer Studio 2.2.0 Internet Library 5.53.0.A1 Security Library 1.15.0.A1 Extended AT Application 1.20.0.A1 Location Library 1.4.2