Search resources

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Measured current consumption  Different modules' operating modes Different scenarios.  This application note will be useful for those customers who want to obtimize the size and the capacity of the battery to be used.

This Application Note describes a method to wake up an embedded module by motion detection through the use of a 3 axis accelerometer. Generally, when an AirPrime embedded module is not needed in working mode, the best way to save energy is to enter into ALARM mode. It can then be woken up by programming an RTC interrupt.  However, in specific applications, it can be useful to wake up the AirPrime module when a movement is detected. This application note shows a method to implement this mechanism.

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Li-Polymer battery used Possible drops of the battery voltage below its over discharge threshold (~2.8V) Only a DC voltage source available to charge the battery (impossible to connect an external charger)

This FTP over SSL (FTPS) application note shows how to interact with an FTPS server through GPRS to perform an FTP PUT and FTP READ action.

The purpose of this application note is to provide a first level of suitable information to select and implement a power supply solution for a GSM application.

This Application Note describes methods and services through which an application will be able to perform a Geolocation operation through the use of purely CellID’s without the need for GPS.

This Application Note describes the hands-free solution available on AirPrime WS6318 module. A brief explanation of the hands-free solution is followed by a detailed presentation covering the overview, block schematic, parameters explanation, tuning guidelines, and default parameters.

This application note explains how to set up an SSL-secured communications channel with an Apache server.

This page contains the release notes of the Open AT Developer Studio 2.3.2

This document provides guideline for designing applications based on the HiLoNC V2 product. Recommendations are provided to maximize the efficient migration from the AirPrime WISMO2x8 to the HiLoNC V2.  This document also defines the differences between both products and provides solutions.  This document does not cover all the specifics and characteristics of the HiLoNC V2.

The AirVantage agent plugin for the Open AT Developer Studio is used to make Open AT embedded applications connect to AirVantage Enterprise Platform.

This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways.

Open AT® Application Framework 2.51 package contains : Firmware 7.51   Open AT OS 6.51   Developer Studio 2.2.1   Internet Library 5.54   Security Library 1.16   Extended AT Application 1.21 eCall InBand Modem 1.2.2   Location Library 1.5.1   WMMP Library 4.1

Download Open AT FW 7.51 :

This document is the customer release notes for Firmware R32 of the AirPrime WS6318 Embedded Module.

Release Notes for Location Library 1.5.2 for an AirPrime or AirLink products