Search resources

Document stating the compliance of AirPrime products towards Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

Document stating the compliance of AirLink and AirPrime products toward California Regulation on Chemicals Proposition 65.

AirPrime WS218 Declaration of European Union RoHS Compliant Product

This Application Note presents the steps to set up a PPP connection in Linux Operating System using the Sierra Wireless embedded module. As Windows® and Linux® have different procedures for creating a PPP connection, this application note provides details about the process for Linux environment. The steps to create the connection are well supported with images to graphically depict those steps.

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

This manual describes the AT command set used with the AirPrime WS218 and WS228 Embedded Module for Firmware L23c.

AT Commands manual for L23b Firmware on WS218 and WS228

AT Commands manual for L23 Firmware on WS218 and WS228

This document is the customer release note for Firmware L23c of the AirPrime WS218 and WS228.

This document is the customer release note for Firmware L23B of the AirPrime WISMO218 and WISMO228.

Customer Release Notes for Firmware L23a applicable to WS218 and WS228

The scope of this document is the Firmware B02f00gg release description for AirPrime WS218 GSM/GPRS wireless module.

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Measured current consumption  Different modules' operating modes Different scenarios.  This application note will be useful for those customers who want to obtimize the size and the capacity of the battery to be used.

This application note describes how to interface an external battery charging solution with an AirPrime wireless module. It is useful if you have the following requirements: Li-Polymer battery used Possible drops of the battery voltage below its over discharge threshold (~2.8V) Only a DC voltage source available to charge the battery (impossible to connect an external charger)

The purpose of this application note is to provide a first level of suitable information to select and implement a power supply solution for a GSM application.

This Application Note describes methods and services through which an application will be able to perform a Geolocation operation through the use of purely CellID’s without the need for GPS.

This document provides guideline for designing applications based on the HiLoNC V2 product. Recommendations are provided to maximize the efficient migration from the AirPrime WISMO2x8 to the HiLoNC V2.  This document also defines the differences between both products and provides solutions.  This document does not cover all the specifics and characteristics of the HiLoNC V2.

This document describes the features and specifications of the AirPrime WISMO218 module and provides you with the information required to integrate the AirPrime WISMO218 into your products.

This Application Note explains the Sierra Wireless implementation for SMS Data Download. It describes: SMS data download definition in the 3GPP standard Sierra Wireless firmware behavior Advices to support SMS data download.