Search resources

Document stating the compliance of AirPrime products towards Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

This document describes the hardware interface of the HiLo 3G & HiLo3G-D M2M module used to connect the device application and the air interface.

Document stating the compliance of AirLink and AirPrime products toward California Regulation on Chemicals Proposition 65.

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

This document contains the list of major software changes.

This document contains the list of major software changes for the HiLo 3G Module.

A zip file containing HiLo3G-900 certifications

A zip file containing HiLo3G-850 certifications.

The Starter Development Tool to be used for all HiLo products. The ZIP file contains the Starter Development Tool EXE file to be installed.

The older versions for AT starter are : AT Starter v1.9.11.0 AT Starter v1.9.5

The Starter Development Tool to be used for all HiLo products.  The ZIP file contains the Starter Development Tool EXE file to be installed.

This document describes how to set up the HiLo 3G Interface Board.

A zip file containing all HiLo certifications.

This document contains the description of the packaging of the HiLo modules.

This document presents schematics for the HiLo module and Development Kit.

This document describes the hardware interface of the HiLo module that connects to the cellular device application and the air interface.

This document presents technical drawings of the HiLo module and its packaging.

This document describes some examples of hardware solutions for developing products around the HiLo GPRS module. Most of these solutions are not mandatory, and can be used as suggestions of what should be done to have a working product, and what should be avoided. This document suggests how to integrate the HiLo GPRS module in machine devices such as automotive, AMM (Automatic Metering Management), tracking system: connection with external devices, layout advises, external components (decoupling capacitors…)