Search resources

Document stating the compliance of AirPrime products towards Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

This document describes the hardware interface of the HiLoNC V2 module that connects to the cellular device application and the air interface. The HiLoNC V2 offers new features compared to HiLoNC including digital audio link and RF burst indicator.

Document stating the compliance of AirLink and AirPrime products toward California Regulation on Chemicals Proposition 65.

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

Firmware 9.00 for HiLoNC V2

This document contains the list of major software changes.

Here are the available list of FW for HiloNC V2: HiloNC V2 Software 9.00 HiloNC V2 Software 8.00 HiloNC V2 Software 7.40 HiLoNC V2 Software 6.00

The Starter Development Tool to be used for all HiLo products. The ZIP file contains the Starter Development Tool EXE file to be installed.

GSM 07.10 is a multiplexer protocol specified by ETSI.  It operates between a MS and a TE and allows a number of simultaneous sessions over a normal serial asynchronous interface.  The GSM 07.10 driver has been enhanced and modified to suit the Sierra Wireless HL embedded modules, which implement a subset of the basic mode operations.

The HiloUpgrader application is designed to upgrade cellular modules software versions. Hilo V2 modules are supported since HiloUpgrader release 4.0. HL6 modules are supported since HiloUpgrader release 6.0. Hilo 3G modules are not supported.

MMS Generator is a Sierra Wireless solution for its customers to easily create Multimedia Messages (MM) ready to be sent using the MMS protocol. MM generated can then be sent by a MMS client, including Sierra Wireless HiLo V2 and HiLoNC V2 modules. It does not require any specific knowledge in MMS protocol from user.

Firmware 6.00 for HiLoNC V2

This document provides guideline for designing applications based on the HiLoNC V2 product. Recommendations are provided to maximize the efficient migration from the AirPrime WISMO2x8 to the HiLoNC V2.  This document also defines the differences between both products and provides solutions.  This document does not cover all the specifics and characteristics of the HiLoNC V2.

The Starter Development Tool to be used for all HiLo products.  The ZIP file contains the Starter Development Tool EXE file to be installed.

A zip file containing all HiLo certifications.

This document contains the description of the packaging of the HiLo modules.

This document describes the hardware interface of the HiLo module that connects to the cellular device application and the air interface.