Search resources

Document stating the compliance of AirPrime products towards Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

This document presents guidelines for the industrial assembly of an AirPrime HL Series embedded module on an application.

This document presents guidelines for the industrial assembly of the AirPrime Snap-in Socket on an application.

This technical note  outlines the necessary details to meet GSMA Device Connection Efficiency requirements.

Document stating the compliance of AirLink and AirPrime products toward California Regulation on Chemicals Proposition 65.

This document describes the AT command set used with the AirPrime HL6528x and HL85xxx embedded modules.

This document describes the features and specifications of the AirPrime HL6528x module and provides you with the information required to integrate the AirPrime HL6528x into your products.

CAD file archive to ease customer hardware design

AirPrime HL6528 Declaration of European Union RoHS Compliant Product

This application note describes the Dual SIM Single Standby feature of the AirPrime HL Series of embedded modules.

This document presents guidelines for the handling of solderable AirPrime products as they are moisture/reflow sensitive surface mount devices.

This application note describes the antenna detection feature of the AirPrime HL Series of embedded modules.

This document provides a hardware reference design for HL6528 and HL6528-G, interfacing to a generic 3.3V host CPU or microcontroller.

This document describes the features and specifications of the AirPrime Q26 Carrier Board and provides you with the information required to integrate the AirPrime Q26 Carrier Board into your products.

This application note reviews each objective with its associated requirements and then details design rules for successful Sierra Wireless mobile devices integration, with a particular focus on PCB design.  It is recommended to read this application note before starting a design as its provided guidance can contribute to save time and money by reducing the number of PCB iterations before final certification and market introduction.

This Application Note presents the steps to set up a PPP connection in Linux Operating System using the Sierra Wireless embedded module. As Windows® and Linux® have different procedures for creating a PPP connection, this application note provides details about the process for Linux environment. The steps to create the connection are well supported with images to graphically depict those steps.

The Antenna Switch function enables switching between two antennas and can be implemented on customer application.This application note describes how to design a GSM antenna switch, from component selection to PCB implementation. This switching function can be used with an antenna detection system.

This application note provides all necessary information to perform Firmware Over-The-Air (FOTA) on Sierra Wireless AirPrime HL Series modules.  This application note applies to all products in the AirPrime HL6, HL7, and HL8 Series.