Search resources

Windows application used to download files to Sierra Wireless embedded modules.

Latest Mobile Broadband Package (MBPL) for Linux (SDK, Drivers, Documentation)

This document describes the features and specifications of the AirPrime EM7511 module and provides you with the information required to integrate the AirPrime EM7511 into your products.

This document describes proprietary, password-protected AT commands available for the MC 9x50-based intelligent embedded modules. These commands are intended for use by OEMs, and are supplemental to the standard AT commands for GSM devices defined by the 3GPP (3rd Generation Partnership Project) in TS 27.007 AT command set for User Equipment (UE) and TS 27.005 Use of Data Terminal Equipment—Data Circuit terminating Equipment (DTE-DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (BSE).

Download the SWI9x50C PRI Release Note

Available Windows 11 driver packages for EM/MC/RC/WP series modules.

Available Windows 11 driver packages for EM/MC/RC/WP series modules.

Available Windows 11 driver packages for EM/MC/RC/WP series modules.

Download the SWI9x50C Release Note

This page includes approved operator images comprised of FW and Configuration files. Packages are available for the EM7511 and EM7565.

Recommended cybersecurity design guidelines for integration of Semtech cellular modules into end products.

Document stating the compliance of AirPrime products towards Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

This document provides information for developers planning to migrate to the EM8695 module from EM74xx (EM7430, EM7455), EM74x1 (EM7411, EM7421, EM7431), EM75xx (EM7511, EM7565), or EM759x (EM7590, EM7595) modules.

This page includes regulatory approval documentation and certification/compliance documentation for the EM7511 and EM7565.

This document provides information for migrating applications from Sierra Wireless EM74xx or EM75xx modules to EM759X (EM7590, EM7595) LTE modules. 

Several of the Qualcomm based modules that Sierra Wireless produce have the ability to store multiple firmware and carrier (i.e. Vodafone, Verizon, Docomo, etc.) configuration files. This video shows how to manage and switch between these firmware and carrier configuration files.

This video walkthrough demonstrates how to retrieve NMEA frames from modules like the EM/MC74. All required AT commands are reviewed and demonstrated.

From a UE (user equipment, so a handset/module) perspective there are a number of parameters that are critical to its operation. This video explains what these numbers are, where they come from and how they are used. It is applicable to all UE's on the market.

This video shows how to start a data session that a Linux system is able to use for data communications over its USB link when connected to a 3G or LTE network.

The Qualcomm based modules may be upgraded and downgraded between firmware versions and across carrier configuration files. This video walks through how to perform this operation using the QMI SDK on an EM7565. It is applicable to all of our EM, MC, RC and WP families of units.