This tutorial shows how to step by step develop a simple embedded application using a device simulator. No embedded programming skill is required for running this tutorial. This development case monitors a temperature and send data and alerts to AirVantage cloud platform. The application can as well receive commands to set up the monitoring period and the alert threshold.

This step by step tutorial shows how to develop a simple embedded application using C and Open AT. This development case monitors a temperature sensor and send data and alerts to the AirVantage cloud platform. The application can also receive commands to set up the monitoring period and the alert threshold.

This article lists the frequency bands supported by the GX440.

This article provides information about 3G and 2G fallback for the GX440, GX450, ES440/450, LX60 and RV50/RV50X.

This article defines what an MEID is and lists alternate names.

This video shows how to optimise the RV50/RV50X/RV55 to achieve the lowest possible power consumption.

This article lists the frequency bands supported by the GX400 (MC5728V and MC8705).

This article provides information on locating and using the SIM slot for the GX400/440/450, ES440/450, and LS300 (GSM Only).

This article provides best practices on configuring the oMG's WiFi Network settings.

This article provides supplemental information on using oMG policies to maintain connectivity, and describes some of the similar/related WAN and cellular link properties.

With this 3-day course intended for Developers using the Open AT Application Framework, we provide scheduled training course dates in Europe, South Africa, North America and Asia on a regular basis. If you have larger needs or just want a dedicated tutoring session, we also offer on-site programs.

This article briefly discusses the radio frequencies for GPS.

Lists the X-Cards available for the GX400/440/450.

Contains an application note describing how to disable remote ACEmanager access from ALMS.

This article explains how to configure an Airlink device to auto answer incoming connections and receive data over a serial port.

Contains an application note describing how to change a gateway password using ACEmanager or AirLink Management Service (ALMS).

Contains an application note describing how to enable trusted IPs using ACEmanager and AirLink Management Service (ALMS).