This document describes raw GNSS data message content.

This application note explains the details of BootROM with BROM.DLL handshaking and flash download / format process and helps users upgrade firmware images that can be sent to a target (GNSS module) via the RS232 (UART) interface via their hosts.

This document explains how to use the GNSS Android driver sample code to integrate Android 7.0 into AirPrime XA and XM modules.

GPS receivers of Sierra Wireless AirPrime modules can be connected to a passive antenna (which should be physically located very close to the unit) or a remote active antenna containing an LNA, which will both improve SNR and compensate for any cable/insertion losses. This application note describes the use of the integrated GPS active antenna powering function when available, and how to design an external powering circuit where required.

This application note describes the benefits and impacts of the various low power modes of operation available with the GPS solutions based on the AirPrime XM0110 GPS module combined with an AirPrime embedded wireless module.

This application note describes the three types of bus services - SPI, I2C, and parallel bus - used to communicate between two or more connected devices.

This application note explains how to get basic and advanced GPS Debug information, in order to investigate GPS performance issues.

This application note provides a detailed description of the GPS Aiding solutions available wih the AirPrime XM0110 GPS module combined with an AirPrime embedded wireless module.

This application note describes some concepts in using Developer Studio and shows various snapshots in using it. These snapshots shows the sequence of using Developer Studio, and also functions as a quick start-up guide.