Filter by
16 results

Provides an application note listing the capacitors and inductors in the BC127.

This document describes the steps needed to rework the AirPrime BC127 and set it up for conducted RF tests.

Contains an application note describing the BC127 antenna layout requirements.

This example uses an analog input to measure button presses then sends the appropiate commands to an BlueCreations.com BC127 bluetooth module that is running Melody Audio v6 via Serial. It also uses HID to do screen unlock and app switching of a USB OTG connected tablet

Contains an application note describing the relevant audio interface settings for Melody as well as the full set of I2S configuration parameters.

Contains an application note describing how to verify the Melody Audio I2S interface functionality.

Contains an application note describing configurations to reduce power consumption on Melody.

Contains an application note describing how to connect SPP from Windows 7 to Melody and from Melody to Windows 7.

Contains an application note describing how to use the Melody Device Firmware Upgrade Tool.

This project contains the MelodySmart sample application and libraries for Android. It allows any Android 4.3+ device to communicate with BlueCreation's BC118/BC127 range of products over Bluetooth Low Energy.

Contains an application note describing how to enable and configure IAP on Melody.

Contains an application note describing how to program the BC127 Discovery Board using CSR BlueFlash.

Contains an application note describing how to use the USB Demo App which is a 32-bit Windows application that gives you the ability to send commands via USB to Melody (5.7 RC4 onwards).

Contains an application note providing power measurement values for a BC127 running Melody Audio 5.7 RC 8, and describes the test setup under which these values were obtained.

Contains an application note describing how to program the BC127 Development Board.

Provides a link to a repository containing the Android sample app and library for communicating with BlueCreation's BC127 family of products over a Classic Bluetooth connection .