This technical note outlines the necessary details to meet GSMA Device Connection Efficiency requirements.

This document provides describes the process to resolve an issue that can cause secure boot-enabled HL7800-M modules running specific firmware versions to fail secure boot verification and no longer be able to boot up.

This document describes thermal mitigation techniques implemented on AirPrime EM75xx LTE modules.

This technical note provides several design guidelines for customers who are: implementing their own GNSS solution in combination with the WP7601, WP7610 and WP7611; or using the module’s embedded GNSS solution.

This document gives an overview of how to use the CMUX feature supported by the AirPrime HL78xx.

This document presents design guidelines for integrating Sierra Wireless Ready-to-Connect (R2C) modules into OEM host platforms and activating them for use.

This document describes Customer Secure Boot for Linux images, an extension of the Secure Boot functionality that Sierra Wireless WP series modules automatically provide for firmware images, which ensures only authenticated images are loaded and run on WP modules. This application note applies to all products in the AirPrime WP76 and WP77 Series.

This document defines and describes antenna fundamentals, integrated antenna design and selection, as well as common antenna implementation issues.

This document provides an overview on how to enable and capture output debug messages using the Sierra Wireless GNSS Tool.

This document provides details regarding firmware download on both BOOT and USER modes.

This document explains how aiding data can be applied to a GNSS engine while it is searching for satellite vehicles to acquire a faster Time to First Fix.

This article explains the requirement to use a Comodo certificate in order to use the AMM management tunnel with ALEOS devices.

This document describes how to access AirPrime XA and XM modules via the I2C interface.

Contains a document explaining how to configure network interfaces and firewall rules for the FX30/FX30S.

This document provides information regarding GNSS EPH format and transfer protocol.

This package contains a simple app to open a TCP socket and connect it to a local UART, and a technical note that describes the app.

This document describes guidelines for choosing or designing a GNSS antenna system for use with a Sierra Wireless AirPrime WP Series module. This application note applies to all products in the AirPrime WPx5, WP76 and WP77 Series.