Application Description This application is intended to show an AirLink FX programmable modem, in conjunction with the Ethernet X-card, to operate as an internet gateway allowing a PC to be plugged into it through its Ethernet port and then surf the internet. The Open AT code includes: - A DHCP server to automatically allocate IP address to the computers connected on the LAN. - A web server that prompts an HTTP page to configure the APN and related username and password.

Provides a link to a repository containing the Android sample app and library for communicating with BlueCreation's BC127 family of products over a Classic Bluetooth connection .

This Application Note describes the general structure of the Real Time Operating System implemented in Sierra Wireless modules, the RTOS features extended to developers and their restrictions, limitations and best practices to be followed when using the RTOS features.

AT Command Parser source code demonstrates and provides re-usable code showing how to subscribe and parser responses to both unsolicted and sent AT commands.

Simple Open AT sample code giving an example of managing a TCP Client socket.

This application note describes the benefits and impacts of the various low power modes of operation available with the GPS solutions based on the AirPrime XM0110 GPS module combined with an AirPrime embedded wireless module.

This application note provides an introduction to MMS to educate the reader on the system architecture, and then explains how to use it on Sierra Wireless products.

This document gives an overview on using a private DNS server to resolve domain name on an AirPrime module.

This application note describes the three types of bus services - SPI, I2C, and parallel bus - used to communicate between two or more connected devices.

There are currently multiple tools available to log the AirPrime Q26 Series, WMP Series and SL6087 to both debug Open AT applications and provide information to Sierra Wireless technical support for in depth analysis of problems. This document outlines the tools available, how they should be used to provide information to Sierra Wireless and developers and also suggests filters to be using in common scenario's

This application note details how to use JTAG (an in-circuit debugging solution capable of tracking down issues which may occur in routines but cannot be reproduced with the Remote Tasks Environment), with or without various debuggers.

This application note explains how to get basic and advanced GPS Debug information, in order to investigate GPS performance issues.

This application note provides a detailed description of the GPS Aiding solutions available wih the AirPrime XM0110 GPS module combined with an AirPrime embedded wireless module.

The Sierra Wireless C-GPS Plug-In (now replaced by the Location Library) facilitates the integration of GPS functionalities. The library drives a companion GPS chipset; here, the Opus III from eRide, Inc.

This application note describes the steps to open an FCM flow (V24 serial flow, GSM flow or GPRS flow) in an application. It includes a sample using a custom AT command to read data from the flash and send them to the external application using the FCM V24 serial flow.

This application note explains how to use the Watchdog Timer Reset function. Designed for remote devices requiring automatic operation, it generates a hardware reset to the module if the Open AT embedded software hangs, allowing the software to restart.

This application note describes some concepts in using Developer Studio and shows various snapshots in using it. These snapshots shows the sequence of using Developer Studio, and also functions as a quick start-up guide.

This package contains ReadyAgent code samples in C, Lua and Java