78214

When the command 'AT+AUDIOFILE=”recordparam”,' is used, 0 is stored as duration instead of answering +CME ERROR: 3

AT

AUDIO

6.54.0.A1

78148

Sending AT+AUDIOFILE="recordstart","Music_file.wav","mic","audioproc","loop" returns OK instead of +CME ERROR: 4.

AT

AUDIO

6.54.0.A1

76764

+AUDIOFILE test command print bad gain lower limit (-178 instead of -78)

AT

AUDIO

6.54.0.A1

79265

adl_audioTonePlayExt() called with duration=0 (infinite play) doesn’t work

AT

AUDIO

6.54.0.A1

79351

Customer cannot use adl_atCmdSendExt() API with "ATA" string if he uses InBand Modem (or any plugin that uses ADL call services)

AT

OTHER

6.54.0.A1

82089

If some badly formed AT commands are sent by app, it could end with a heap memory corruption

AT

OTHER

6.54.0.A1

69169

With certain USIMs, adl_simSubscribe () does not allows to enter PIN.

SIM

OTHER

6.54.0.A1

82649

Reset Cause given in adl_InitGetType() is not correct when Watchdog Reset happens during execution of Customer Task (0 instead of 1)

SYS

INIT

6.54.0.A1

78102

adl_tcuStop() function returns incorrect remaining time value.

AT

OTHER

6.54.0.A1

81709

Ring indicator is not working for AT+CREG=1 when Embedded application is running.

AT

OTHER

6.54.0.A1

83665

When AT+CREG=1 command is issued and there is a cell switching, unsolicited +CREG indication is received when OAT application is in execution and module is in roaming state.

AT

OTHER

6.54.0.A1

83239

ADL command processing halts if SMS is sent right at the time when an active voice call is disconnected by the peer

AT

SMS

6.54.0.A1

87046

ADL OS Power Down Service, in adl_pwrdwnSubscribe

p_SleepEntrance is not supported

Callback for 32Khz mode entrance

p_SleepExit  is not supported

Callback for 32Khz mode exit

AT

SLEEP MODE

66337

Error is not returned in case an attempt is made to play or listen to an audio stream which is not supported by AirPrime.

AT

AUDIO

66697

Random value of "Context" is received when API adl_atCmdSendText() is used after API adl_atCmdSendExt().

AT

OTHER

41819

When FCM service is running with call services, commands ATA, ATD, ATH cannot be filtered using the API adl_atCmdSubscribe().

AT

OTHER

56598

On issuing a pre subscribed command from an application, through the 'adl_atCmdSendExt()' API, an OK and ERROR is received alternatively, i.e. the command is sent to the command handler and the firmware alternatively. Ideally, the command should always be sent to the command handler and OK should be received.

AT

OTHER

41818

Subscription to commands beginning with "ATA", "ATD" or "ATH" using the API adl_atCmdSubscribe () fails in case Call service is subscribed prior to subscribing to the commands from the application.

AT

OTHER

53324

When Using %I64 format specifier for displaying u64/s64 variable through API adl_atSendresponse() in TARGET mode it always prints only "%I64d" instead of the value of the variable. Workaround: use %lld instead of %I64.

AT

OTHER

78187

On I2C bus, NACK is not detected as an error: adl_busread() or adl_buswrite() return OK in this case.

DEVICE

I2C

64114

With adl_adSubscribe() API, it is possible to allocate only one cell with an undefined size, any further cell allocations with undefined size cause the AirPrime to restart.

OTHER

OTHER

53517

Sometimes handler associated with adl_errSubscribe() function is not invoked on reception of error from OS.

RTK

OTHER