Internet Library 5.43.3 Release note

Feb 1, 2013
Author: Sierra Wireless
Version: 1

NEW FEATURES
SOFTWARE RELEASE DESCRIPTION
2.1 Software Identification
2.2 Compatibility
KNOWN RESTRICTIONS
INTERFACE MODIFICATIONS
CORRECTIONS & IMPROVEMENTS

1. New Features

No new features have been introduced in this release.

2. Software Release Description

2.1. Software Identification

Software Identification

Internet Library 5.43.3 / Internet Application 5.43.3

2.2. Compatibility

Open AT^® OS	6.37.0.201202060950
Firmware	7.47.6.201212170952

3. Known Restrictions

ID	Description (What / When)	Impacted Domain	Impacted Sub Domain
62628	AirPrime goes into DATA mode even when issuing the AT+WIPDATA command with unused (inactive) socket. Escape sequence "+++" needs to be given to come out of DATA mode	Internet Application	OTHER
61424	AirPrime cannot switch from DATA mode to AT mode if [ETX] character is encountered after HTTP POST method.	Internet Application	OTHER
59200	Unable to open server socket again, after closing the server socket and client socket (in this order)	Internet Application	OTHER
59087	When trying to set the data representation type at UART2 using Internet Application command AT+WIPOPT=4,1,2,40,x, after the FTP connection is made the expected OK response is not received.	Internet Application	OTHER
55455	+CME ERROR:800 is received instead of +CME ERROR:851 when Server Address, Username and Password parameters are missing in the internet application command AT+WIPCREATE=4,1 to create the FTP server.	Internet Application	OTHER
66121	AirPrime may reset when SNMP session is closed using API wip_snmpClose()	Internet Library	OTHER
65800	Variable bindings in an SNMP trap is not sent correctly when using wip_snmpTrap()	Internet Library	OTHER
60917	While trying to execute Internet Application commands using function adl_atCmdSendExt() from a command handler of customized command, subscribed in an embedded application, then sometimes response to Internet Application commands is not received.	Internet Library	OTHER
59494	GPRS bearer is not started if wip_bearerStart() is called in the +CGREG unsolicited handler. However, this can be achieved by starting the bearer in +CREG callback instead.	Internet Library	OTHER
58386	AirPrime may reset while transferring MMS with file greater than 6KB in "chunked data transfer encoding".	Internet Library	OTHER
57788	wip_bearerSetOpts() returns OK instead of WIP_BERR_BAD_STATE when the GPRS bearer is not in DISCONNECTED state.	Internet Library	OTHER
56165	If the network is lost (+WIND: 8 is received) between bearer start and reception of bearer connect event, Internet library is no more responsive and no event exchange takes place.	Internet Library	OTHER
56164	AirPrime may reset when network connection is lost during GPRS bearer stop operation.	Internet Library	OTHER
55094	Ethernet bearer cannot be reopened after restarting the IP Stack.	Internet Library	OTHER
55029	When an FTP server is established on UART PPP bearer, reset is observed while closing the stack without first closing the bearer.	Internet Library	OTHER
55021	It is not possible to start the Ethernet bearer with DHCP enabled. Also with DHCP disabled, the Ethernet bearer does not get unsubscribed on removing the Ethernet cable.	Internet Library	OTHER
54402	Sometimes the AirPrime stops responding if the TCP/IP internet stack is closed before closing the open ethernet bearer.	Internet Library	OTHER
54010	When using wip_list API, WIP_CEV_PEER_CLOSE event is not received after the last data is received.	Internet Library	OTHER
52919	When file containing only DLE ETX character sequence is sent from TCP client to the server then data loss occurs and "SHUTDOWN" indication is received.	Internet Library	OTHER
52499	Incorrect error codes are received when invalid peer IP address is given while trying to establish TCP Server Client connection.	Internet Library	OTHER

4. Interface Modifications

No interface modifications have been in introduced in Internet Library 5.43.3.

5. Corrections & Improvements

ID	Description (What / When)	Impacted Domain	Impacted Sub Domain	Fixed in
65388	AirPrime may reset when TCP socket is created and closed repeatedly in a loop using Internet Application.	Internet Application	OTHER	Internet Application 5.43.3
65592	AirPrime may reset when GPRS bearer is opened and closed repeatedly in a loop using APIs wip_bearerOpen() and wip_bearerClose()	Internet Library	OTHER	Internet Library 5.43.3
64960	WIP_CEV_PEER_CLOSE EVENT is NOT received with the HTTPS in case of Server Shutdown when data channel is opened.	Internet Library	OTHER	Internet Library 5.43.3
63624	When API wip_getFileOpts() is used with HTTP POST method and with header "Connection" with value "Keep-Alive" and header "Expect", "100-continue", then there can be multiple responses received from Server for a single request. And when API wip_getOpts() is called to get the values of WIP_COPT_HTTP_STATUS_CODE and WIP_COPT_HTTP_STATUS_REASON for each response, the values of first response are returned for all the further responses till the next request.	Internet Library	OTHER	Internet Library 5.43.1
62231	Information for Internet Application i.e., application name, version and company name are now filled in response of ATI9 command	Internet Application	OTHER	Internet Application 5.43
60150	On UART1, when trying to start or stop a GPRS bearer on any virtual port other than the virtual port on which GPRS bearer was opened, the OK response is received on the virtual port on which the GPRS bearer was opened instead on the same virtual port on which the command was issued.	Internet Application	OTHER	Internet Application 5.42
60285	For MMS service, while using WIPSoft command AT+WIPOPT to attach the files, the embedded module gets reset if the total size increases more than 150Kbytes.	Internet Application	OTHER	Internet Application 5.42
60271	Error is received while trying to upload/download a file with filename greater than 62 characters. However, the ‘filename‘parameter of ‘+WIPFILE’ command can take 128 characters.	Internet Library	OTHER	Internet Library 5.42
43781	+CME ERROR:841 is received instead of +WIPPEERCLOSE when FTP session is closed by peer.	Internet Application	OTHER	Internet Application 5.41
56102	No +WIPFILE indication received when using HTTP_POST method in AT+WIPFILE wipsoft command.	Internet Application	OTHER	Internet Application 5.41
58000	+WIPPEERCLOSE indication is not received on closing the FTP channel manually using the command AT+WIPCLOSE=4,<idx>	Internet Application	OTHER	Internet Application 5.41
59518	A new option has been added in AT+WIPBR to return detailed CME Error codes or a generic error (+CME ERROR: 812) in the case of GPRS set up is failure.	Internet Application	OTHER	Internet Application 5.41
59551	Reset is observed if an attempt is made to establish a POP3 session over an index value greater than 9 using the AT+WIPCREATE command.	Internet Application	OTHER	Internet Application 5.41
59569	WIP Plug-in component information is incorrect in WIPSoft. It is displayed as "foo Plug-in Package" with an incorrect version number.	Internet Application	OTHER	Internet Application 5.41
56411 58873 58874	Compiling a C++ application using WIPLib as Plug-in fails. Compilation errors are received as some structure fields in a WIP header file are named as Sierra Wireless defined data types. Workaround: use u32 _u32; s32 _s32; in WIP header file.	Internet Library	OTHER	Internet Library 5.41
57579	After the local SIM is removed and the remote SIM is inserted while GPRS setup is in progress, the WIP bearer startup for the remote SIM fails and no notification or WIP plug-In event is sent for the same.	Internet Library	OTHER	Internet Library 5.41
58253	When SIM is removed, WIP_BEV_STOPPED event is not sent out when GPRS bearer is started using WIP.	Internet Library	OTHER	Internet Library 5.41
50608	In the case of GPRS set up is failure, WIP now returns specific error codes instead of a generalized event (WIP_BERR_GPRS_FAILED).	Internet Library	OTHER	Internet Library 5.41
52249	The "+WIPPEERCLOSE" unsolicited indication is not received when the FTP channel is closed by the server due to time out.	Internet Library	OTHER	Internet Library 5.41
54171	When an error is generated on a TCP Channel, wip_getOpts() returns the correct error code in WIPLib but error code is not correctly displayed by WIPSoft.	Internet Library	OTHER	Internet Library 5.41
56368	WIP net init returns error -26 (WM_EINVAL) when called from task ID greater than 16.	Internet Library	OTHER	Internet Library 5.41
56731 58865	Reconnecting to the Embedded module from Windows PC using PPP bearer fails even when WIP_BOPT_RESTART is set TRUE . Windows pops up Error:777 after attempted to reconnect.	Internet Library	OTHER	Internet Library 5.41
57970	TCP server socket could not be created using TCP server sample when WIP API wip_TCPServerCreateOpts() is being used in sample.	Internet Library	OTHER	Internet Library 5.41
59853	Ethernet controller may not be stable when AHB (Advanced High-performance Bus) clock of the Embedded module is increased from 26Mhz to 52 MHz (using AT+WCPS). This is because the C-Ethernet plug-in SPI bus runs at 26MHz instead of 13MHz but the Microchip chip supports only upto 20MHz.	Internet Library	OTHER	Internet Library 5.41
59121	When compared against iDE v1, stack size allocated in WipSoft application (compiled in RVDS and ADS) has increased when built using Developer Studio.	Internet Library	OTHER	Internet Library 5.41
59166	When compared against iDE v1, stack size allocated in WIP samples (compiled in RVDS and ADS) has increased when built using Developer Studio. Note: This will not affect current customer applications.	Internet Library	OTHER	Internet Library 5.41
57526	+CME ERROR: 847 is not received when the timer expires while trying to connect to GPRS bearer using WIPSoft.	Internet Application	OTHER	Internet Application 5.40
57583	Peer port is displayed as 0 in +WIPDATA indication for UDP protocol.	Internet Application	OTHER	Internet Application 5.40
56324	OK is not displayed when socket command subscription is successful.	Internet Application	OTHER	Internet Application 5.40
57230	To prevent data corruption, MMS Transaction ID buffer has been increased from 10bytes to 11bytes.	Internet Library	OTHER	Internet Library 5.40
57462	Repeated GPRS bearer start and stop along with stack open and close leads to module reset.	Internet Library	OTHER	Internet Library 5.40
57504	User receives +CME ERROR:847 and bearer gets disconnected when AT+WIPBR=4,6,0 command is given at the time GPRS bearer is already connected. Ideally, only +CME ERROR:803 should be received and not followed by +CME ERROR:847, when user attempts to start the GPRS bearer at the time the bearer is already connected. The GPRS bearer should not get disconnected after 2 minutes on such an attempt.	Internet Application	OTHER	Internet Application 5.32
54436	On giving the command AT+WIPBR=2, 6, <opt num>, <value> where <opt num>=12/13/14/20 and value=alphabet/negative, user receives +CME ERROR: 800 instead of +CME ERROR: 801.	Internet Application	OTHER	Internet Application 5.31
56360	WIP_BERR_NO_DEV error is received while opening Ethernet bearer with RVDS binary. It works fine with GCC compiled binary. User should not get this error irrespective of compiler being used i.e. GCC or RVDS.	Internet Application	OTHER	Internet Application 5.31
56883	Creating and closing the HTTP sessions consecutively for sometimes causes Embedded module to reset. This is due to memory leak while opening and closing the HTTP Sessions.	Internet Application	OTHER	Internet Application 5.31
53515	It is not possible to send data through UDP client socket in the continuous data mode, using WIPSoft application compiled on RVDS compiler. The Embedded module gets reset. Ideally, user should be able to exchange data over UDP socket using application compiled on any of the compilers: ADC/GCC/RVDS.	Internet Application	OTHER	Internet Application 5.31
54615	When AT+WIPBR command is issued with "invalid value" for the option WIP_BOPT_LOGIN, OK response is received instead of +CME ERROR: 801. Note that this command is given after starting the stack (AT+WIPCFG=1) and opening the particular bearer (AT+WIPBR=1, 6).	Internet Application	OTHER	Internet Application 5.31
54984	The user cannot retrieve the IP address values set through +WIPBR command, before or after starting the bearer. Ideally, the user should be able to retrieve the IP related values after starting the bearer.	Internet Application	OTHER	Internet Application 5.31
55050	Using WIPSoft, the unsolicited indications +WIPDATA, +WIPACCEPT, +WIPFILE and +WIPREADY are not received on all the ports opened (USB, CMUX and UARTS). Ideally, these unsolicited indications should be received at all open ports.	Internet Application	OTHER	Internet Application 5.31
53459	When wip_putfile () API is provided with invalid file path for FTP protocol, the event WIP_CEV_OPEN followed by WIP_CEV_WRITE event are received in the file data handler. The ideal behavior should have been receiving WIP_CEV_ERROR in file data handler. Note that, this behavior is observed only in passive mode of FTP and not in case of active mode FTP.	Internet Library	OTHER	Internet Library 5.30
53549	The "WIP_BEV_STOPPED" event is not received when Ethernet bearer is stopped using wip_bearerStop () API.	Internet Library	OTHER	Internet Library 5.30
54452	After activating PDP context with CID 1 with WIP bearer APIs, then the dialing ATD99*2# with CID 2 freezes the dialing process. It is not possible to open another PDP context when bearer is started using WIP Plug-In.	Internet Library	OTHER	Internet Library 5.30
54671	It is not possible to perform operations such as set or get options through an Embedded application, compiled with RVDS compiler. The error -998 is received from WIP Library. Ideally user should be able to perform the above operations on RVDS also, as already being able to successfully perform on other two compilers: GCC and ADS.	Internet Library	OTHER	Internet Library 5.30
54982	User will not be able to create a socket after starting the Ethernet bearer, when DHCP is disabled. Ideally, user should be able to create a socket for both the cases: DHCP enabled or disabled.	Internet Library	OTHER	Internet Library 5.30
55022	It is not possible to create a socket after starting the Ethernet bearer, "+CME ERROR: 803" is attained. Ideally the user should be able to create a socket after starting Ethernet bearer, irrespective whether DHCP is enabled or disabled.	Internet Library	OTHER	Internet Library 5.30
56419	When mail is downloaded using POP3 protocol and WIPSoft application, data gets corrupted. Some characters are missing from the downloaded mail.	Internet Library	OTHER	Internet Library 5.30
52954	Using WIPSoft, while creating an FTP/POP3/SMTP/HTTP/UDP session using “AT+WIPCREATE” command, if the peer port/local port number is not provided then “+CME ERROR 847” is returned.	Internet Application	OTHER	Internet Application 5.21
54438	For AT+WIPCREATE command (UDP) having port number with odd number of digits (within port range 1-65535) +CME ERROR: 800 are returned. Also, for port number out of bounds but having odd number of digits +CME ERROR: 800 is returned instead of +CME ERROR: 832.	Internet Application	OTHER	Internet Application 5.21
55648	When sending data using DTR toggling mode with WIPSoft, data loss occurs. Ideally there should not be any data loss.	Internet Application	OTHER	Internet Application 5.21
53546	OK is received before the CONNECT indication while downloading a file of small size from FTP server over UART PPP bearer.	Internet Application	OTHER	Internet Application 5.21
54789	Using WIPSoft, if the DTR signal is used to switch from DATA mode (ONLINE) to AT mode (OFFLINE), in some cases, the V24 request does not go in to OFFLINE. Even after manually trying +++ command the transition does not occur. Wireless CPU^® has to be restarted to get out of this state.	Internet Application	OTHER	Internet Application 5.21
54049	Using WIPSoft, "+CME ERROR: 851" is returned when creating FTP/HTTP/SMTP/POP3 data channel with default value of optional parameter.	Internet Application	OTHER	Internet Application 5.21
54400	When Ethernet bearer is opened and closed multiple times using AT+WIPBR command then a reset is observed on Wireless CPU^® most of the times.	Internet Application	OTHER	Internet Application 5.21
44584	Using WIPSoft, when an attempt is made to download a non-existing file from a FTP server, the FCM flow switches to data mode and CONNECT indication is received on the external application.	Internet Application	OTHER	Internet Application 5.21
50057	Sometime for +WIPPING command, the number of PING response received is one less than the specified number of PING echo request specified(WIP_COPT_REPEAT).	Internet Library	OTHER	Internet Library 5.20
51380	It is not possible to open a second PDP context using cid2 when bearer is started using Open AT^® WIP Plug-In.	Internet Library	OTHER	Internet Library 5.20
51761	FTP data channel is closed by WIP when an error is raised by the socket. This leads to memory corruption if the user application keeps using this channel, since it does not exist anymore.	Internet Library	OTHER	Internet Library 5.20
52283	Response to a Ping request is not systematically sent to user application, whatever the timeout value.	Internet Library	OTHER	Internet Library 5.20
52453	Sometime the “response_time” parameter is set zero with timeout parameter specified in the +WIPPING command.	Internet Library	OTHER	Internet Library 5.20
54787	Unable to make multiple connections with IDS server when a Ping application is running in parallel	Internet Library	OTHER	Internet Library 5.20
53931	When activating Ping channel to send several ping requests, if the channel is closed by application before completion of all ping requests, error -995 is reported.	Internet Library	OTHER	Internet Library 5.20
46367	WIP_COPT_POP3_MAILSIZE option will return the value received by the 'LIST n' command and not the 'RETR n' command.	Internet Library	OTHER	Internet Library 5.10
47094	When an attempt is made to change the "Data representation TYPE" for FTP protocol using “AT+WIPOPT” command, the type is not set successfully for the FTP session.	Internet Library	OTHER	Internet Library 5.10
47660	Invalid value read from WIPSoft for option 7 (WIP_COPT_NODELAY) for TCP Channels.	Internet Library	OTHER	Internet Library 5.10
48994	With current implementation, application can't manually set the Ethernet link configuration and each try will set 10 Base T always. Next version will set correctly the link speed.	Internet Library	OTHER	Internet Library 5.10
49013 49014	Currently, customer can't read back value that was configured. After change, value of this option will be correctly returned.	Internet Library	OTHER	Internet Library 5.10
49268	Application can set a 32bits value for NAT timeouts but can't read value if >65535. Correction will correct this problem.	Internet Library	OTHER	Internet Library 5.10
49873	Result of ping function is a multiple of 500ms.	Internet Library	OTHER	Internet Library 5.10
49918	Wireless CPU^® reset is observed while setting options with NULL MMS structure pointer.	Internet Library	OTHER	Internet Library 5.10
50009	If you get an HTTPS page without initialized WIPSSL library, you get a reboot.	Internet Library	OTHER	Internet Library 5.10
50410	WIP does not fully release memory it was allocated. Customer app will consume 272 bytes of heap memory as soon as WIP was initialized. After correction, these 272 bytes will be freed.	Internet Library	OTHER	Internet Library 5.10
50446	In a HTTP Client, an event WIP_CERR_CSTATE is generated at the final call of WIP_CEV_READ event.	Internet Library	OTHER	Internet Library 5.10
50640	When the WIP sample applications are compiled with the Eclipse environment, the compilation fails.	Internet Library	OTHER	Internet Library 5.10
50656	It is not possible to use specific socket parameters with high level protocol (such as FTP).	Internet Library	OTHER	Internet Library 5.10
50657	Customer application doesn't receive a DONE event for a file operation and so, it must wait sometimes after a PEER_CLOSE event on the data channel before issuing the next operation.	Internet Library	OTHER	Internet Library 5.10
50679	A WIP_CEV_WRITE event is actually generated at the opening of an FTP file download channel. Filter in wrapper channel should allow application to receive only relevant events according the file operation.	Internet Library	OTHER	Internet Library 5.10
50806	If an UART is switched to DATA mode with wip_fcmCreate() then switched back to AT mode with "+++" escape sequence, no further subscription to that FCM port will succeed.	Internet Library	OTHER	Internet Library 5.10
51257	The HTTP method used is not traced properly.	Internet Library	OTHER	Internet Library 5.10
51261	Cannot send mms using Vodafone or Tim operator in Italy, as their service center reject anonymous message sending.	Internet Library	OTHER	Internet Library 5.10
51437	unable to compile the TCP_CLIENT sample application in RTE mode using ECLPISE IDE	Internet Library	OTHER	Internet Library 5.10
46887	Application can't set the Ethernet interface link configuration nor the promiscuous mode.	Internet Library	OTHER	Internet Library 5.00
48103	When a finalizer is specified for the HTTP SESSION channel, it is called prematurely.	Internet Library	OTHER	Internet Library 5.00
42734	No response is received if an attempt is made to exchange data for the second time for FTP/HTTP/SMTP/POP3 protocols.	Internet Library	OTHER	WIPLib 4.00
45232	When An email is sent using SMTP protocol from an SMTP server, the body is not received correctly or the e-mail is not received at all.	Internet Library	OTHER	WIPLib 4.00
47095	SMTP doesn't respect the RFC requirements for addresses encoding	Internet Library	OTHER	WIPLib 4.00
47097	"AT+WIPPING" does not work for the first time when used with a DNS name	Internet Library	OTHER	WIPLib 4.00
44666	It is not possible to create a PPP client on the Wireless CPU^® which connects with the PPP server on the PC.	Internet Library	OTHER	WIPLib 4.00
52786	Data loss is observed in the UART when a file is downloaded from the FTP server at lower baud rates especially at 9600 baud/s or below.	Internet Application	OTHER	Internet Application 5.12
51799	Data corruption occurs when a binary file is sent from a utility (UdpPktTest.exe) to the Wireless CPU^®, (with WIPSoft application) in case of UDP protocol.	Internet Application	OTHER	Internet Application 5.12
53038	The “+WIPFILE” indication is not received after switching to AT mode on completion of get file request, through a HTTP session.	Internet Application	OTHER	Internet Application 5.12
52859	It is not possible to create an HTTP session without specifying the server address in WIPSoft.	Internet Application	OTHER	Internet Application 5.12
51445	Two CONNECT indications are received when file is uploaded using FTP protocol.	Internet Application	OTHER	Internet Application 5.12
43776	OK is not received when values are read using +WIPOPT command for FTP protocol.	Internet Application	OTHER	Internet Application 5.12
40606	Data can be lost if an attempt is made to write large amount of data to an UDP socket.	Internet Application	OTHER	Internet Application 5.12
51285	NET 10 level traces are not displayed in TMT to get the debug information when WIP Soft application is used.	Internet Application	OTHER	Internet Application 5.12
48612	In Wireless CPU^®, during FTP download data loss is experienced.	Internet Application	OTHER	Internet Application 5.12
52861	Debug traces are not sent to USB port when activated using +WIPCFG command in WIPSoft.	Internet Application	OTHER	Internet Application 5.12
52224	Closing the PPP connection after creation of TCP socket leads to WCPU reset.	Internet Application	OTHER	Internet Application 5.12
51725	While uploading a file, if “+++” is issued to switch to AT mode, two “OK” responses are received in case of FTP protocol.	Internet Application	OTHER	Internet Application 5.12
50028	When the +WIPFILE command is used to retrieve data from server, the first chunk of data is not received.	Internet Application	OTHER	Internet Application 5.12
48164	Incorrect +CME ERROR codes are sent by WIPSOFT for PPP LINK failure and PPP Terminate requests.	Internet Application	OTHER	Internet Application 5.12
47657	Wrong error code is being displayed for the +WIPCREATE command.	Internet Application	OTHER	Internet Application 5.12
44320	Responses for file session are not sent to the port on which the file session is created for SMTP and POP3 protocols.	Internet Application	OTHER	Internet Application 5.12
43737	The “WIP_CERR_NOT_SUPPORTED” error code is received when an attempt is made to map an UDP socket to continuous mode of data transmission.	Internet Application	OTHER	Internet Application 5.12
52318	Unexpected "OK" indication is received before “+WIPPEERCLOSE” indication, in case of SMTP and POP3 protocol.	Internet Application	OTHER	Internet Application 5.12
51910	It is not possible to delete or retrieve a mail for the second time when the first attempt returns an error in case of POP3 protocol.	Internet Application	OTHER	Internet Application 5.12
47949	+WIPDATA, +WIPFILE and +WIPACCEPT unsolicited indications are not received with UART2, CMUX and USB ports.	Internet Application	OTHER	Internet Application 5.12
44436	Error codes returned by the “AT+WIPOPT” command for setting/retrieving different options for UDP, TCP server and TCP client sockets are not uniform.	Internet Application	OTHER	Internet Application 5.12
44364	No response is attained if an attempt is made to create/start a socket/session with less than/more than minimum/maximum number of mandatory parameters for any protocol. No error code is returned if the specified number of parameters is more than the maximum number of mandatory parameters for starting/closing stack and saving/erasing TCP/IP stack configuration parameters into/from flash.	Internet Application	OTHER	Internet Application 5.12
44363	Negative option value for the FTP session returns “+CME ERROR: 800” error code instead of “+CME ERROR: 801”.	Internet Application	OTHER	Internet Application 5.12
44362	Zero value for the “WIP_BOPT_GPRS_CID” option returns “OK” response though the valid value ranges from 1 to 4	Internet Application	OTHER	Internet Application 5.12
44370	Not able to use option WIP_WOPT_RCV_LOWAT provided by WIPSoft.	Internet Application	OTHER	Internet Application 5.11
51164	Customer application is unable to use HTTP GET request using WipSoft, especially using small web pages.	Internet Application	OTHER	Internet Application 5.11
51753	It is not possible to upload or download a file for the second time when the first trial returns an error in case of FTP protocol.	Internet Application	OTHER	Internet Application 5.11
51756	“OK” response returned for the invalid AT+WIPDATA command e.g.: AT+WIPDATA=2,1, or AT+WIPDATA=1,1,	Internet Application	OTHER	Internet Application 5.11
51815	“CME ERROR:800” is returned when trying to upload a file without specifying the path i.e. AT+WIPFILE = 4,1,2,"ftptest.txt"	Internet Application	OTHER	Internet Application 5.11
50888	UDP continuous transparent mode is not in compliant with GR64 behavior.	Internet Application	OTHER	Internet Application 5.11
47765	No response is received if an attempt is made to exchange data for the second time for FTP/HTTP/SMTP/POP3 protocols.	Internet Application	OTHER	Internet Application 5.11
41712	Data is lost while large chunk of data is sent/received for TCP and UDP protocol.	Internet Application	OTHER	Internet Application 5.11
48061	Unsolicited responses are sometimes not attained in the external application until an unless addition AT command is executed.	Internet Application	OTHER	Internet Application 5.11
44710	Add one new mode through +WIPCFG AT command to allow or not the “+++” escape sequence to be sent as data towards the remote IP device.	Internet Application	OTHER	Internet Application 5.11
45535	Recreation of TCP client socket is unsuccessful when the URL is used instead of IP address.	Internet Application	OTHER	Internet Application 5.11
37108	When creating a socket with the wip_create() (wiplib) or AT+WIPCREATE (wipsoft) just after the call of wipclose() (wiplib) or AT+WIPCLOSE (from wipsoft) of that socket (same address and port) , that created socket cannot function properly as expected because the socket closing needs time and is not immediate. Workaround: The socket open call should not be called just after a socket close call: After a call to wip_close() or AT+WIPCLOSE to close a socket, a delay of one second is necessary before calling again the wip_create() or AT+WIPCREATE to open a new socket. If due to that asynchronous process the socket open call is too close to the socket close call and that issue is encountered, another workaround is to close and reopen that socket.	Internet Application	OTHER	Internet Application 5.11
47468 41712	Data is lost while large chunk of data is sent/received for TCP and UDP protocol	Internet Application	OTHER	Internet Application 5.01

Comment

Forum

2.2. Compatibility

Tags