Firmware 7.52.2.A5 Release Notes
- Jan 8, 2015
- Author: Sierra Wireless
- Version: 7.52.2.A5
Contents
2. Abbreviations and Definitions
5. Software Release Description
6. Software Changes Description
9. Restrictions and Additional Information
List of Tables
Table 1. New Features/Enhancements
Table 2. Abbreviations and Definitions
Table 3. Related Documentation
Table 4. Hardware Compatibility
Table 5. Software Compatibility
Table 6. Firmware Release Information
- Introduction
- Document Scope
- Document Audience
- New Features/Enhancements
The scope of this document is the Firmware 7.52.2.A5 release description for the AirPrime SL808xT. Firmware 7.52.2.A5 is a maintenance release of Firmware 7.52.
This release note may be distributed to all direct and indirect customers and will be posted in Sierra Wireless Developer Zone.
Feature |
Description |
File System provisioning |
Ability to populate the file system content while uploading an Open AT application to the module, easing steps to manage on end application to populate file system content. |
Abbreviation/Acronym |
Definitions |
AMS |
AirVantage Management Services |
APN |
Access Point Name |
CMUX |
3GPP TS 27.010 multiplexing protocol |
CSD |
Circuit Switched Data |
CTS |
Clear to Send |
Data Call |
GSM Circuit Switched Data Call |
DLC |
Data Link Connection |
EDGE |
Enhanced Data rates for GSM Evolution |
EF |
Elementary File |
EGPRS |
Enhanced GPRS |
FDN |
Fixed Dialing Number (Phonebook) |
GPRS |
General Packet Radio Service |
GSM |
Global System for Mobile communications |
IMEI |
International Mobile Equipment Identity |
MCC |
Mobile Country Code |
ME |
Mobile Equipment |
MNC |
Mobile Network Code |
MS |
Mobile Station |
PDP |
Packet Data Protocol |
PLMN |
Public Lands Mobile Network |
PPP |
Point-to-Point Protocol |
SIM |
Subscriber Identity Module |
SMS |
Short Message Service |
UICC |
Universal Integrated Circuit Card |
USIM |
Universal Subscriber Identity Module |
Ref. # |
Document # |
Revision |
Document Title |
[1] |
4111843 |
6.0 |
AT Commands Interface Guide for Firmware 7.52 |
[2] |
4111844 |
6.0 |
ADL User Guide for Open AT Application Framework OS 6.52 |
[3] |
4111992 |
8.3 |
AirPrime SL808x, SL808xT, SL808xBT Product Technical Specification and Customer Design Guidelines |
[4] |
4115145 |
3.2 |
AirPrime SL808xT, SL808xBT and SL808xBTA Product Technical Specification and Customer Design Guidelines |
[5] |
4115761 |
1.0 |
AirPrime SL808xT, SL808xBT Migration Guide |
[6] |
4112314 |
3.2 |
AirPrime SL Series Mechanical Socket Development Kit User Guide |
2170029 |
3.0 |
- Hardware Compatibility
- Software Compatibility
AirPrime Compatibility List |
AirPrime SL8080T, SL8080BT |
AirPrime SL8082T, SL8082BT |
AirPrime SL8084T, SL8084BT |
|
Component |
Version |
|
Open AT Application Framework |
2.52.2.A5.201412171046 |
|
Open AT OS |
6.52.0.201402271535 |
|
Location Library |
2.0.0.201310171016 or 1.4.6.201310160912 |
|
Security Library |
2.2.0.201306261000 |
|
Internet Library |
5.56.0.201305170830 |
|
Extended AT Application |
1.3.1.201405121153 |
|
AirVantage Agent |
5.3.4.I201408221554 |
Modem (ATI8) |
Services (ATI3) |
|
Identification |
S4_1_0_21 |
7.52.2.A5.201411281219 |
Date of generation |
2014/11/27 16:53 |
2014/11/28 12:19 |
Binary Size |
1804452 bytes |
|
Checksum |
0x02E18B16 |
|
Boot loader X-modem |
S4_1_0_21 |
|
First stage boot loader |
S4_1_0_21 |
|
IMEI SV |
0x19 |
|
Flash/RAM type |
NAND 128 MBytes / RAM 64 Mbytes |
|
- Software Tools Versions
- Released Files and Download Processes
S/W Tools Name |
Version |
Resource File |
Binary Update Tool |
R11.2.1105.0 |
SIERRA_BOOT_S4.1.0.21_sl808x.cwe, SIERRA_OAT_FW_752_2_A5_5_FULL_sl808x.cwe or R7.52.2.A5.201411281219.SL808x.exe |
Developer Studio |
3.1 |
|
MuxConfTool |
4.5.6.0 |
Download Option |
Files |
|
Upgrade through Developer Studio |
Open_AT_Application_Framework_v2-52-2-A5_Full_Installer.exe |
|
Upgrade through Binary Update Tool |
SIERRA_BOOT_S4.1.0.21_sl808x.cwe, SIERRA_OAT_FW_752_2_A5_5_FULL_sl808x.cwe or R7.52.2.A5.201411281219.SL808x.exe |
|
Upgrade through X-modem |
Bootloader |
SIERRA_BOOT_S4.1.0.21_sl808x.dwl |
Firmware |
SIERRA_OAT_FW_752_2_A5_5_FULL_sl808x.dwl |
|
- Applications built with a version before Open AT Application Framework 2.52 have to be rebuilt with this Open AT Application Framework.
On AirPrime SL808xT with Firmware 7.50.0.A1, firmware (SIERRA_OAT_FW_752_2_A5_5_FULL_sl808x) should be upgraded before bootloader (SIERRA_BOOT_S4.1.0.21_sl808x), if .cwe or .dwl files are used for upgrade. R7.52.2.A5.201411281219.SL808x.exe can be used to recover AirPrime SL808xT in bad state.
For the upgrade procedure, you can refer to:
- In-line help for upgrade procedure through Developer Studio
- Software Changes Description
- Validated Corrections/Improvements
- Interface Changes
- Troubleshooting
- Certification Description
- Restrictions and Additional Information
This section presents all corrections or improvements integrated in Firmware 7.52.2.A5.
Issues are sorted by alphabetical order of Impacted Domain.
ID |
Description |
Impacted Domain |
Impacted Sub-Domain |
Fixed in |
76417 70757 |
Installation of AMS firmware/embedded application delta may sometime fail if the AirPrime is powered-off just after +WDSI: 14 unsolicited response. |
AMS |
AMS |
7.52.2.A5 |
76270 |
After the AirPrime is reset, AMS login and password set using AT+WDSS are not displayed |
AMS |
AMS |
7.52.2.A5 |
75749 |
AMS firmware/embedded application delta update may fail if GPRS attach is performed bearer is started right at the point when the AirPrime is trying to perform network detach. |
AMS |
AMS |
7.52.2.A5 |
75259 |
PDP context activation request to AMS server after patch update is sent without username and password information. |
AMS |
AMS |
7.52.2.A5 |
72572 |
AT+PACSP (AT&T proprietary command) is not functional |
AT |
OTHER |
7.52.2.A5 |
74178 |
SPI block cannot be subscribed more than with different chip select signal |
DEVICE |
IOB |
7.52.2.A5 |
76600 |
Installation of a corrupt firmware or a corrupt embedded application is not blocked by the firmware, due to lack of CRC check. |
DWL |
OATBOOT |
7.52.2.A5 |
73183 |
WIP bearer start may fail if the APN requires authentication. |
GPRS |
SESSION_MGT |
7.52.2.A5 |
73186 |
Service status in the network for +CLIP/+CLIR/+COLP supplementary service is incorrectly displayed as not provisioned, even if the service is provisioned. |
GSM |
SS |
7.52.2.A5 |
73655 |
ADL_SIM_EVENT_FULL_INIT event not received if UART2 is attempted to be opened |
SIM |
OTHER |
7.52.2.A5 |
74054 73979 |
In case of file system corruption, a recovery mechanism of critical firmware data has been implemented to secure module being able to power up. While recovering the module, file system content (files and A&D objects) may not fully recover. Present Open AT application is not impacted. |
OTHER |
OTHER |
7.52.2.A5 |
72229 |
Call waiting beeps for an incoming call are not heard during an active call. |
GSM |
SS |
7.52.1.A5 |
65387 |
When AT+CLCK="PN",1,<password> command is executed, ERROR is returned. |
AT |
OTHER |
7.52 |
67234 |
AT+WIMEI cannot set IMEI on AirPrimes with default/blank IMEI. |
AT |
OTHER |
7.52 |
68260 |
+CLIP response is returned very late when interrogation of +CLIP status is rejected by network |
AT |
OTHER |
7.52 |
68301 |
+CME ERROR: 30 is returned very late when the activation for call waiting is rejected by network. |
AT |
OTHER |
7.52 |
68334 |
Activating/deactivating ENS feature using AT+WBHV is not functional. |
AT |
OTHER |
7.52 |
68777 |
<ActiveConfig> setting of +SPEAKER is not maintained after AirPrime power cycles. |
AT |
OTHER |
7.52 |
72215 |
AT+WPPP command fails to update password for CHAP/PAP protocol, if it is already set once. |
AT |
OTHER |
7.52 |
65291 |
Deleted LDN phonebook entries still appear after AirPrime restarts on deleting the LDN phonebook by AT+WDCP="LD" command. |
AT |
PHONEBOOK |
7.52 |
67175 |
Emergency Call 000 Fails with a PIN or PUK locked USIM. |
AT |
PHONEBOOK |
7.52 |
64014 |
In PDU mode, the content of stored unsent message is altered after receiving a new message. |
AT |
SMS |
7.52 |
65241 |
AT+CMGD command does not delete the message properly. |
AT |
SMS |
7.52 |
68697 |
SMS cannot be sent after the activation of PDP context. |
AT |
SMS |
7.52 |
70570 |
Occasional AirPrime reset while sending lots of SMS in quick succession. |
AT |
SMS |
7.52 |
70076 |
Bridge mode fails in case of 2 PPP interfaces are bridged |
DATA |
OTHER |
7.52 |
66695 |
AT+CMUT=1 does not mute the microphone. Instead it mutes the earphone. |
DEVICE |
AUDIO |
7.52 |
67382 |
AirPrime is unable to stop the BUSY tone when an MO call is made to a busy phone number. |
DEVICE |
AUDIO |
7.52 |
66285 |
On configuring the GPIO as INPUT using AT+WIOM command and then writing on the INPUT configured GPIO using AT+WIOW command, the direction on INPUT configured GPIO changes to OUTPUT. |
DEVICE |
IOB |
7.52 |
67371 |
No error is received on subscribing to ADL BUS service, either on already subscribed GPIO or on unsupported GPIO. |
DEVICE |
IOB |
7.52 |
69896 |
GPIO's subscribed as OUTPUT by using Application may switch its direction to INPUT after calling adl_extintSubscribe API. |
DEVICE |
IOB |
7.52 |
70705 |
"CONNECT" message is not displayed when data connection is established on DLC opened on USB. |
DEVICE |
MUX |
7.52 |
67839 |
SPI write sometimes fails when a payload exceeding 90 bytes is written repeatedly in a loop. |
DEVICE |
OTHER |
7.52 |
68868 |
Sometimes AirPrime is not able to communicate on the SPI bus. |
DEVICE |
OTHER |
7.52 |
69811 |
The volume of the speaker and microphone do not change for some values of gain of AT+WDGR and AT+WDGT. |
DEVICE |
OTHER |
7.52 |
70931 |
Occasionally, ADL_INIT_REBOOT_FROM_EXCEPTION not received in adl_main if reset is caused due to Application inserting too many items in queue. |
DEVICE |
OTHER |
7.52 |
69179 |
On USB port, DD frames are not received while activating the DATA mode for GPRS session. |
DEVICE |
USB |
7.52 |
67208 |
On UART CTS pin becomes logical low on disabling hardware flow control. |
DEVICE |
V24 |
7.52 |
68653 |
Loopback connection on UART1 results in data loss. |
DEVICE |
V24 |
7.52 |
69862 |
Download of large file using Developer Studio fails over UART. |
DEVICE |
V24 |
7.52 |
67454 |
The XMODEM download over UART can be done only at the baud rate of 115200. |
DWL |
OTHER |
7.52 |
69230 |
After few normal restarts (due to +WOPEN, +CFUN), AT+WDWL doesn't launch the xmodem bootloader. |
DWL |
OTHER |
7.52 |
65856 |
AirPrime may restart during firmware upgrade through AirVantage Management Services. |
AMS |
AMS |
7.52 |
66161 |
+CME ERROR: 515 is received, when an Application is running on AirPrime and +WDSO command is sent in concatenation with other command from AirVantage Management Services server. |
AMS |
AMS |
7.52 |
66311 |
AirPrime cannot connect to the AirVantage Management Services when an HTTP connection has been created using Internet Library. |
AMS |
AMS |
7.52 |
66315 |
If RDMS APN is not set and connection with first tomer APN fails, AirPrime doesn’t try to connect with remaining tomer APNs. Correct behavior is to try all PDP contexts one by one. |
AMS |
AMS |
7.52 |
65760 |
AT+WPPP=1 without optional parameters returns +CME ERROR:3. |
GPRS |
OTHER |
7.52 |
66956 |
+CGEV indications may not be reported when cid parameter is present in them. |
GPRS |
OTHER |
7.52 |
69081 |
GPRS detach not performed with at+cgatt=0. |
GPRS |
OTHER |
7.52 |
71930 |
AirPrime does not acknowledge LCP-ECHO request leading to disconnection of PPP on Linux OS. |
GPRS |
OTHER |
7.52 |
69356 |
AirPrime restarts when AT+WIPBR is executed, for GPRS bearer, with combined length of <login> and <password> higher than 48. |
GPRS |
SESSION_MGT |
7.52 |
68015 |
AT port can become unresponsive when the download XTRA command and the inquiry command are sent in a short time. |
GPS |
GPS |
7.52 |
67170 67020 |
Improvements related to GPS performance |
GPS |
GPS |
7.52 |
65891 |
During IP connection, sometimes event ADL_CALL_HANGUP_OK is not received when adl_callhangup() is called during an active call. |
GSM |
CC |
7.52 |
66155 |
Emergency call not possible without SIM or when SIM PIN is locked and PIN is not yet entered. |
GSM |
CC |
7.52 |
66631 |
During IP connection, sometimes event ADL_CALL_HANGUP_OK is not received when adl_callhangup() is called during an active call. |
GSM |
CC |
7.52 |
67176 |
When a mobile originated emergency call is terminated using ATH, sometimes OK is not received and no further voice call is possible. |
GSM |
CC |
7.52 |
67356 |
When a call waiting indication is seen, AT+CHLD=2 needs to be executed twice to accept the new call and to put the active call on hold. |
GSM |
CC |
7.52 |
67357 |
Users with Call waiting service enabled have difficulty in hearing the ongoing call when a third call is in waiting. |
GSM |
CC |
7.52 |
67358 |
User cannot use call waiting and call conferencing services. |
GSM |
CC |
7.52 |
67542 |
ADL_CALL_EVENT_NO_CARRIER event not sent to the Application when call is BUSY. |
GSM |
CC |
7.52 |
68243 |
When AT+CHLD=0 or AT+CHLD=1x command is issued, Active call is also disconnected. |
GSM |
CC |
7.52 |
68302 |
When AT+CHLD=0 command is issued, Active call is also disconnected. |
GSM |
CC |
7.52 |
68514 |
AT+CACM does not return correct accumulated meter values. |
GSM |
CC |
7.52 |
69657 |
All emergency calls are directed to 112, instead of the emergency number specified. |
GSM |
CC |
7.52 |
69825 |
AirPrime resets on dialing a number with 60 or more digits. |
GSM |
CC |
7.52 |
70421 |
When SIM is in "No PIN" or "PIN1 blocked", emergency call can't be made. |
GSM |
CC |
7.52 |
67546 |
Emergency call made after PUK1 is unlocked gets disconnected automatically after a short duration |
GSM |
CC |
7.52 |
69425 |
Emergency Call 000 fails. |
GSM |
CC |
7.52 |
65424 |
AT+CCED=0,8 always returns 99 for channel bit error rate. |
GSM |
OTHER |
7.52 |
65776 |
<LAC> and <CellId> field value is not reported correctly through CCED response. |
GSM |
OTHER |
7.52 |
67838 |
+WIND: 15 is not seen when there is a change in time zone. |
GSM |
OTHER |
7.52 |
68339 |
When AT+CSSN=1,1 has been executed on AirPrime, the supplementary service notification for "additional incoming call forwarded" ( +CSSU: 10 ) is never received. |
GSM |
OTHER |
7.52 |
71984 |
AT+CCED=0 leads to occasional reception of +CME ERROR: 30. |
GSM |
OTHER |
7.52 |
67682 |
Stress testing AT+COPS=?, without waiting for response, leads to +CME ERROR 515 for all the AT commands including the AT command. |
GSM |
PLMN_SEL |
7.52 |
68746 |
+CREG: 2 is not received on network loss. |
GSM |
RR |
7.52 |
66017 |
SMS ADL callbacks not always received even if SMS is sent correctly. |
GSM |
SMS |
7.52 |
69517 |
On sending the SMS again after changing the service type from GPRS to GSM (circuit switched),+CMS ERROR: 515 is received. |
GSM |
SMS |
7.52 |
70420 |
Occasional AirPrime reset while sending SMS. |
GSM |
SMS |
7.52 |
64421 |
<time> field of +CCFC is not displayed when <reason> is no reply. |
GSM |
SS |
7.52 |
64814 |
Call waiting unsolicited responses (+CCWA ) are not received when the ongoing call has been put on hold. |
GSM |
SS |
7.52 |
65377 |
At times complete incoming USSD string is not shown with + D indication. |
GSM |
SS |
7.52 |
68215 |
AT+CCFC=0,4 does not erase unconditional call forwarding for data call and AT+CCWA=0,0 does not disable call waiting for data call. |
GSM |
SS |
7.52 |
68220 |
Call Barring Service not working. |
GSM |
SS |
7.52 |
68250 |
AT+CCFC returns incorrect call forward status. |
GSM |
SS |
7.52 |
68337 |
Registration of Call Forwarding Supplementary service for all asynchronous services, using ATD command, leads to registration of the service for all tele-services. |
GSM |
SS |
7.52 |
68513 |
Call waiting status, received with +CCWA indications, is incorrect. |
GSM |
SS |
7.52 |
68516 |
AirPrime displays the connected line identification presentation information even if "COLP" is not provisioned. |
GSM |
SS |
7.52 |
68672 |
Call waiting status, received in +CCWA: indication, is incorrect. |
GSM |
SS |
7.52 |
68901 |
Certain + D indications are not received even when AT+ D=1 has been issued. |
GSM |
SS |
7.52 |
69024 |
Extra responses of activating call forwarding including that of data, fax are received along with correct response for speech for BS codes =17(Voice group calling service) or 18(Voice broadcast service). |
GSM |
SS |
7.52 |
69096 |
Supplementary service notification for "forwarded MT call" (+CSSU: 0) are missing when enabled by AT+CSSN=1. |
GSM |
SS |
7.52 |
66868 |
Audio quality may deteriorate when audio & GPS operations are preformed concurrently. |
HWL |
AUDIO |
7.52 |
66908 |
Microphone feedback in speaker may not change for some values of gain of AT+SIDET |
HWL |
AUDIO |
7.52 |
68359 |
Wrong digital gain of the speaker in index received if the Gain set in Db mode. |
HWL |
AUDIO |
7.52 |
69262 |
The DTMF tone is played locally at speaker when the tone is sent using AT+VTS. |
HWL |
AUDIO |
7.52 |
70545 |
AirPrime indicates to network that it supports AMR-Wideband (even though it doesn't). |
HWL |
AUDIO |
7.52 |
65626 |
API adl_ioGetCapabilitiesList() returns incorrect number of GPIOs (one more than the actual number of GPIO pins available on the AirPrime). |
OTHER |
OAT |
7.52 |
65718 |
adl_ioRead() retrieves incorrect GPIO level values after some GPIO write operations. |
OTHER |
OTHER |
7.52 |
66491 |
API adl_ctxSuspend does not work. |
OTHER |
OTHER |
7.52 |
68534 |
SPI_CS_N may sometimes be released early, leading to data loss (last byte of SPI data). |
OTHER |
OTHER |
7.52 |
72177 |
With some specific SIM cards, SIM initialization may sometimes fail. |
SIM |
RESET |
7.52 |
66685 |
Software watchdog is not functional. |
SYS |
OTHER |
7.52 |
69803 |
When trying to put a GDB breakpoint in an Application using a low level interrupt, the breakpoint isn't reached and AirPrime restarts. |
SYS |
OTHER |
7.52 |
69086 |
Can't select Band 6 (UMTS800) with AT+WUBS command. |
UMTS |
CELL_SEL |
7.52 |
65550 |
Indicator control, +CIND, reports incorrect signal quality. |
UMTS |
MEASUREMENT |
7.52 |
65722 |
Wrong TON of address for phone number may be received for AT+CLIP command. |
UMTS |
OTHER |
7.52 |
69054 |
The value <Maximum bitrate DL> in sometimes not set correctly with AT+CGEQREQ command. |
UMTS |
OTHER |
7.52 |
This section presents the interfaces that have been modified since Firmware 7.52.
Command |
Comment |
AT+COPN |
The table containing the operators name has been updated as per latest TS.25 list (formerly, SE.13) dated September 8, 2014. |
AT+PASCP |
This AT&T proprietary command indicates to the user the Network Selection Menu availability (ENS support)(also called PLMN Mode bit in the AT&T specification) |
For Open AT Developers, please refer to the Troubleshooting Guide available in Developer Zone before contacting customer support.
For AT developers, please contact customer service for support and debugging information.
Product |
GCF-CC |
NAPRD.03 |
ANATEL |
JRF/JPA |
OFTA |
SL8080T/SL8080BT |
  | v5.21 |
  |   |   |
SL8082T/SL8082BT |
v3.55 |
  |   |   |   |
SL8084T/SL8084BT |
v3.55 |
  | Yes |
Yes |
Yes |
This section presents additional information or restrictions that must be taken into account regarding Firmware 7.52.2.A5. Issues are sorted by alphabetical order of Impacted Domain.
Description (What/When) |
Impacted Domain |
Impacted Sub-Domain |
|
64017 |
AT+WLCK doesn’t work for PS, PP and PC facilities. |
AT |
OTHER |
66591 |
AT+WSVN does not change the IMEI SVN sent to the network |
AT |
OTHER |
68395 |
"+WIND:7" indication is not received when SIM PIN is locked and PIN is not yet entered |
AT |
OTHER |
69109 |
AirPrime indicates to network that it supports Fax (even though it doesn't). This is not expected to impact normal functioning of the AirPrime. |
AT |
OTHER |
75319 |
SMS sent to the AirPrime while it is powered off may sometimes be missed |
AT |
SMS |
72444 |
+CDS or +CDSI unsolicited responses for SMS delivery report may sometimes be missed when a large number of SMS are sent repeatedly and UART port is kept busy |
AT |
SMS |
63843 |
When a STK SEND SS is requested, the action is correctly done, but the Terminal response sent back to the SIM doesn't contain additional information (Operation Code and  SS Parameters). |
AT |
STK |
76924 |
+WDSI: 17 (a fallback mechanism was launched) unsolicited response is not reported when fallback of embedded application or firmware is triggered by the firmware. Firmware triggers fallback if the embedded module resets repeated at power-up (Refer to document [7] AirPrime Recovery Mechanism Application Note). Workaround: On AMS Server, refresh the AirPrime configuration to check embedded application or firmware version & reaffirm if the upgrade was successful. |
AMS |
AMS |
65945 |
During software upgrade using AirVantage Management Services, after a fallback, the +WDSF information is wrong; it informs that a fallback is possible, whereas it is not. |
AMS |
AMS |
66162 |
AT commands (like AT+COPS=?) issued over AMS may fail it takes longer than 60 seconds. |
AMS |
AMS |
71956 |
After a firmware upgrade using Airvantage Management Services , even when the firmware has been re-installed using serial link, value reported by +WDSF: indication incorrectly shows that a fallback firmware package is present. |
AMS |
AMS |
72996 |
Connections to AirVantage Management Services will fail after GPRS connection is closed by +CGATT=0, if +CGCLASS is set to "CG". Connection can be established again only after module is reset. |
AMS |
AMS |
76961 |
AMS Server may sometimes display "SL808x" as the AirPrime name instead of the correct AirPrime name (AvMS node: /DevDetail/FwV) |
AMS |
AMS |
73899 |
wip_netGetOpts() cannot retrieve options WIP_NET_OPT_IP_TTL, WIP_NET_OPT_IP_TOS, WIP_NET_OPT_IP_FRAG_TIMEO |
DATA |
OTHER |
70827 |
WIP_CEV_ERROR is not triggered if GPRS interface is closed using AT+CGACT=0 command |
DATA |
OTHER |
75140 |
Virtual UART (CMUX DLC) may not respond if incoming call is received when sleep mode is enabled. |
DEVICE |
CMUX |
69352 |
SYSTEM_RESET_N pin is not functional after AirPrime enters sleep mode. |
DEVICE |
OTHER |
73466 |
State of RTS returned by adl_portGetSignalState() is incorrect |
DEVICE |
V24 |
73909 |
"." and ".." folders are not shown while listing the contents of a File System. |
Flash |
OTHER |
73128 |
QoS settings reset to default when GPRS bearer is started by an embedded application. |
GPRS |
OTHER |
71957 |
When the T3321 timeout occurs during a GPRS detach procedure with the retransmission, AirPrime fails to perform the GPRS attach subsequently. |
GPRS |
OTHER |
74411 |
PPP dialup (ATD*99***1#) fails if SIM supporting only Packet switched data & if AirPrime is set to AT+CGCLASS="A" Workaround: Use AT+CGCLASS="CG" instead AT+CGCLASS="A" |
GPRS |
SESSION_MGT |
68766 |
When a MO call is made to a 'busy' number, the busy tone doesn't stop even after issuing ATH command |
GSM |
CC |
69266 |
+WIND: 15 (NITZ information message) unsolicited response is not received during power up in the absence of +CGREG:1 (AirPrime connected to GSM only cells) |
GSM |
OTHER |
70587 |
AMR-Wideband is not supported |
HWL |
Audio |
64114 |
With adl_adSubscribe() API, it is possible to allocate only one cell with an undefined size, any further cell allocations with undefined size cause the AirPrime to restart. |
OTHER |
OTHER |
66340 |
Starting time is long compare to 2G products. Start-up times measured in controlled environment are: +WIND: 3 8.74 +WIND: 7 8.91 +CREG: 1 30.11 +WIND: 4 47.14 |
OTHER |
OTHER |
69663 |
The audio PCM playback stops with an error, and cannot be restarted. Sometimes AirPrime restarts after this. |
OTHER |
OTHER |
74302 73669 |
Stack overflow does not trigger a reset & a backtrace |
RTX |
OTHER |
72053 |
ADL event is not received by one of the Application tasks, when two Application tasks are waiting for it. |
RTX |
OTHER |
65589 |
SIM initialization time can be very long and may vary from one SIM to other. |
SIM |
OTHER |
69891 |
Incorrect response is received on selection of a non-existing File ID using AT+CSIM command. |
SIM |
OTHER |
70855 |
+CME ERROR: 13 is not reported after a SIM is removed |
SIM |
OTHER |
69490 |
Incorrect TERMINAL RESPONSE is received if call attempt resulting from a proactive command fails. |
SIM |
STK |
Tags
Related items
AT Commands Interface Guide for Firmware 7.52This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways.
Firmware package 7.52.2.A5 (Open AT version)X-modem & exe file for Firmware 7.52.2.A5 for AirPrime SL808xT
Open AT Application FrameworkThe Open AT Application Framework is a complete software package for embedded M2M application development. It offers a range of readily available building blocks which accelerate the application development process, allowing you to bring connected products to market faster and reduce development costs.

Open AT firmware Release Notes HistoryOpen AT Firmware release notes includes : Firmware 7.54.2.A1 (SL808xT/ BT) Firmware 7.54.0.A1 (SL808xT/ BT) Firmware 7.53.1.A1 (SL808xT/ BT) Firmware 7.52.5.A5 Firmware 7.52.2.A5 Firmware 7.52.1.A5 (SL808xT) Firmware 7.52.0.A1 (Q2698) Open AT Frimware 7.52 Open AT Firmware 7.51 Open AT Firmware 7.50 Open AT Firmware 7.4a Open AT Firmware 7.47.6_V2 Open AT Firmware 7.47.6 Open_AT_Firmware 7.47.4 Open_AT_Firmware 7.47 Open_AT_Firmware 7.46 Open_AT_Firmware 7.45.5 Open_AT_Firmware 7.45.1 Open_AT_Firmware 7.45 Open_AT_Firmware 7.44 Open_AT_Firmware 7.43 Open_AT_Firmware 7.42 Open_AT_Firmware 7.4 Open_AT_Firmware 7.3a Open_AT_Firmware 7.3 Open_AT_Firmware 7.2a Open_AT_Firmware 7.2