Open AT Firmware 7.50.A1 Release note
- Dec 17, 2012
- Author: Sierra Wireless
- Version: 7.50.A1
Release note for Open AT Firmware 7.50.A1, compatible with AirPrime SL8080T, SL8082T, SL8082BT and SL8084T embedded wireless modules.
Not applicable.
2. Software Release Description
|
Software Specification |
Certification (ATI8) |
Firmware (ATI3) |
|
Software Identification |
"MODEM 3G+","Revision: S4_1_0_7AP R1431 CNSZXD00000155 2012/11/19 16:06:52" |
R7.50.0.A1.201212171435.SL808x |
|
Build date |
2012/11/19 16:06:52 |
2012/12/17 14:35 |
|
Binary Size |
N/A |
1670256 Bytes |
|
Checksum |
N/A |
0x648de921 |
|
Bootloader |
"DWL"," S4_1_0_7BT R1431 CNSZXD00000155 2012/11/19 16:06:52","","Sierra Wireless",0,"","00000000","00000000" |
|
|
IMEI SV |
0x01 |
|
|
Flash type |
NAND 128 MBytes / RAM 64 MBytes |
|
|
Embedded module compatibility list |
|
SL8080T, SL8082T, SL8082BT ,SL8084T |
This section summarizes the certifications passed for this software version:
|
Product |
GCF-CC |
NAPRD.03 |
|
SL8080T |
N/A |
v5.12 |
|
SL8082T/ SL8082BT |
v3.48.1 |
N/A |
|
SL8084T |
N/A |
N/A |
The following table summarizes the files needed to upgrade your embedded module with this Firmware version
|
Upgrade Option |
Files |
|
|
|
|
|
|
Upgrade through oneclick tool |
R7.50.0.A1.SL808x_25.exe |
|
|
Upgrade through Binary Update Tool (BUT) |
Bootloader |
01_SIERRA_BOOT_S4.1.0.7_sl808x.cwe |
|
Firmware |
SIERRA_FULL_FW_R750A1_sl808x.cwe |
|
|
Upgarde through X-modem |
Bootloader |
SIERRA_BOOT_S4.1.0.7_sl808x.dwl |
|
Firmware |
SIERRA_FULL_FW_R750A1_sl808x.dwl |
|
For the upgrade procedure, you can refer to in-line help for upgrade procedure through Developer Studio.
|
Id |
Description (What/When) |
|
62991 |
Embedded GDB debugger is not supported. |
4. Known Restrictions
|
Id |
Description (What/When) |
Domain |
Sub-domain |
|
63342 |
[AT+CCWA] Enable call waiting for a specific class is not possible. |
AT |
OTHER |
|
63378 |
[Sim Tool Kit] No terminal response is sent upon GET INKEY pro-active command. |
AT |
STK |
|
63379 |
[Sim Tool Kit] SET UP MENU: menu removal should display empty menu. |
AT |
STK |
|
63380 |
[Sim Tool Kit] SET UP MENU, SELECT ITEM, module resets when try to display large menu. |
AT |
STK |
|
63470 |
[Sim Tool Kit] LANGUAGE NOTIFICATION is not supported. |
AT |
STK |
|
63675 |
[AT+CCLK] +CCLK command can not un-lock FDN memory feature. |
AT |
PHONEBOOK |
|
63843 |
[Sim Tool Kit] SEND SS, Terminal Response not complete. |
AT |
STK |
|
63844 |
[Sim Tool Kit] SEND USSD command does not work. |
AT |
STK |
|
63915 |
[AT+CCLK] FDN lock is not persistent againt the reset. |
AT |
PHONEBOOK |
|
63995 |
[AT+WASR]: default value for AT+WASR is not correct. |
AT |
OTHER |
|
64014 |
[SMS] In PDU mode, the content of stored unsent message is altered after receiving a new message. |
AT |
SMS |
|
64017 |
[AT+WLCK]: Any facility can be activated with AT+WLCK command. |
AT |
OTHER |
|
64019 |
[AT+IPR]: baud rate on the USB port cannot be changed. |
DEVICE |
USB |
|
64034 |
[AT+CCED]: Error is not displayed when unsupported feature is requested. |
AT |
OTHER |
|
64254 |
[CMUX] If the mux server (e.g. muxconftool) doesn't respond, the module doesn't toggle to AT commands mode. |
DEVICE |
MUX |
|
64330 |
[AT+CGATT] AT parser is blocked if AT+CGATT=0 is sent during voice call. |
AT |
OTHER |
|
64389 |
[SMS] Sending a SMS message with Invalid Service Center Number will block the AT parser. |
AT |
SMS |
|
64432 |
[CCFC] Impossible to activate all call forwarding for telephony service |
AT |
OTHER |
|
64439 |
[GPRS] Module may reset during network dial-up stress tests. |
GPRS |
OTHER |
|
64609 |
[SMS]: +CIEV is not received when SMS is received and SMS memory is full. |
AT |
SMS |
|
64612 |
[AT+COPN]: AT+COPN can take a long time. |
AT |
OTHER |
|
64646 |
[SMS]: CDS indication is not received on some network |
AT |
SMS |
|
64748 |
[AT+CPIN] Wrong error code is returned when invalid PUK is issued. |
SIM |
OTHER |
|
64814 |
[Call]: No answer is received to AT+CHLD=2 if this command is issued twice. |
AT |
OTHER |
|
64838 |
[UART]: some data may be lost if a very long command is sent on the UART. |
DEVICE |
OTHER |
|
64993 |
[SMSCB] Cell Broadcast cannot be received on some network. |
AT |
SMS |
|
65064 |
[AT+WBHV]: AT+WBHV? displays features which are not supported. |
AT |
OTHER |
|
65130 |
[AT+WDGR] default WDGR gain is 0. |
HWL |
AUDIO |
|
65146 |
[AT+CGACT]: Bad ERROR cause response when AT+CGACT is issued with bad APN name. |
AT |
OTHER |
|
65179 |
[SMS]: an SMS cannot be sent immediately after reception of WIND:16 indication. |
AT |
SMS |
|
65192 |
[CSQ]: RSSI indication may vary between CCED and CSQ answers. |
AT |
OTHER |
|
65194 |
[AT+WMBS] Module registers to a newtork even if the GSM configured band is badly configured. |
AT |
OTHER |
|
65291 |
[Phonebook]: LD entries can't be deleted. |
AT |
OTHER |
|
65336 |
[CFUN] If AT+CFUN=4 is issued while an SMS message is sending, the module resets. |
AT |
OTHER |
|
65373 |
[AT+IPR]: AT+IPR? displays autobaud is supported. |
DEVICE |
V24 |
|
65377 |
[USSD]: AT+CUSD doesn't work if command starts with # |
AT |
OTHER |
|
65387 |
[AT+CCLK]: Network lock doesn't work |
AT |
OTHER |
|
65424 |
[AT+CCED] BER indication reported upon AT+CCED=0,8 command is not correct. |
AT |
OTHER |
|
65471 |
[AT+ECHO] : default value of Echo Cancelation Algorithm is not restored with A+VIP command. |
HWL |
AUDIO |
|
65488 |
[AT+WDWL] No response to AT+WDWL? command in downloader mode |
AT |
OTHER |
|
65516 |
[At+WDTMF] Playing on the current speaker the DTMF with max sound level and with infinite duration. Module cannot stop playing it. |
DEVICE |
OTHER |
|
65519 |
[At+WDTMF] The DTMF sound level is same whatever the volume is set. (0,7). |
DEVICE |
OTHER |
|
65528 |
[At+WDSS]: After a connection with APMS server, empty APN shall be issued twice for removing APN. |
Embedded RDMS |
RDMS |
|
65550 |
[AT+CIND]: No signal information is reported though AT+CIND |
AT |
OTHER |
|
65553 |
[AT+WDSS] It is not possible to connect to APMS server after received +WDSI: 8 immediately. |
Embedded RDMS |
RDMS |
|
65586 |
[AT+WMSN] : sometimes the serial number is not reported through AT+WMSN command |
AT |
OTHER |
|
65587 |
[AT+CIMI] AT+CIMI may reset the module if this command is sent several times. |
OTHER |
OTHER |
|
65588 |
[+CREG]+CREG:0 is not displayed after AT+CFUN=1 |
AT |
OTHER |
|
65589 |
[AT+CPIN] : SIM initialization timer can be very long ( depend on SIM card) |
SIM |
OTHER |
|
65590 |
[AT+WIOR] Wrong GpioVal is assigned when changing GPIO direction from Input to Output |
DEVICE |
IOB |
|
65608 |
[System] The module may reset during a voice call. |
OTHER |
OTHER |
|
65621 |
[System recovery] When an Open-AT application resets the module in loop, the application is not deactivated. |
OTHER |
OTHER |
|
65722 |
[AT+CLIP] Wrong TON of address for phone number may be received. |
AT |
OTHER |
|
65725 |
[At+WBHV] AT+WBHV=1,2 does not stop the stack : consumption is higher than expected |
AT |
OTHER |
|
65740 |
[AT+ICF] AT+ICF=xx and at+ICF? cannot work on USB. |
DEVICE |
USB |
|
65760 |
[AT+WPPP] AT+WPPP=1 doesn't work. Optional parameters shall be present. |
AT |
OTHER |
|
65766 |
[AT+WBHV] When +WBHV=4 flag is set to 0, DTMF tone is still mixed with voice output. |
HWL |
AUDIO |
|
65776 |
[AT+CCED] LAC information is not correctly reported through AT+CCED command. |
AT |
OTHER |
|
65801 |
[CMUX] Module can't exit CMUX mode by Hard Reset when CMUX tool is closed at the PC side. |
DEVICE |
CMUX |
|
65804 |
[ADL DOTA] adl_fsInstall doesn't work if the soft watchdog is activated. |
OTHER |
OTHER |
|
65856 |
[APMS] Resets may occur during a IDS session if software watchdog is activated. |
Embedded RDMS |
RDMS |
|
65891 |
[Call] Hangup response may be never received. |
GSM |
CC |
|
65921 |
|
Embedded RDMS |
RDMS |
|
65930 |
[APMS] The connection to the server is not resumed after a reboot. |
Embedded RDMS |
RDMS |
|
65940 |
[AT+WDSR] The user agreement timer (set by at+wdsr=5,X) doesn't work well: the timer expiration doesn't occur at the requested date. |
Embedded RDMS |
RDMS |
|
65945 |
[+WDSF] After a fallback, the +WDSF information is wrong, it informs that an fallback is possible, whereas it is not. |
Embedded RDMS |
RDMS |
|
65948 |
[ADL Software Timer] Timers over 3 hours expire very early. |
RTK |
TIMER |
|
65953 |
[+WDSF] After firmware upgraded successfully, the application has been erased. The response of wdsf shows the fallback possible, but it is not (fallback is failed anyway) |
Embedded RDMS |
RDMS |
|
65973 |
[APMS] If an incoming call is released during a patch download, the AT parser may be locked. |
Embedded RDMS |
RDMS |
|
66013 |
[At+WDWL] The download of a compressed Open-AT application may be failed. |
OTHER |
OTHER |
|
66155 |
|
GSM |
CC |
|
66161 |
[AT+WDSO] After issuing AT+WDSO=1,1;+CPIN?, all response is ERROR: 515. |
Embedded RDMS |
RDMS |
|
66272 |
[AT+WDSC] Polling mode does not work after reset |
Embedded RDMS |
RDMS |
|
66281 |
[At+CSIM] AT+CSIM fails to write data to USIM card |
AT |
OTHER |
|
66287 |
[APMS] Module can connect to server with wrong APN |
Embedded RDMS |
RDMS |
|
66311 |
[APMS] Module cannot connect to the server during WIP http connection. |
Embedded RDMS |
RDMS |
|
66340 |
[+WIND] Starting time is long (WIND4 : 43 sec) compare to 2G products. |
OTHER |
OTHER |
|
66423 |
[AT+W32K]: Consumption in sleep mode is higher than specified in the PTS. |
AT |
OTHER |
5. Interface Modifications
Not applicable.
