eCall Library 1.3.4 Release Notes
- Apr 3, 2016
- Author: Sierra Wireless
- Version: 1.3.4
1.3. New Features/Enhancements
2. Abbreviations and Definitions
5. Software Release Description
6. Software Changes Description
No table of figures entries found.
Table 1. New Features/Enhancements
Table 2. Abbreviations and Definitions
Table 3. Related Documentation
Table 4. Hardware Compatibility
Table 5. Software Compatibility
Table 6. Libraries Release Information
1. Introduction
1.1. Document Scope
The scope of this document is the eCall Library 1.3.4 release description for the AirPrimes listed in the compatibility section.
This software library component is delivered as beta for testing, and is expected to be fully validated with Firmware R7.54.1.A1.
The eCall Library 1.3.4 implements the 3GPP InBand modem for eCall, ERA GLONASS and PanEuropean features, and provide C API and AT commands set through several applications:
- IVS_AT_Cmd : Provide InBand Modem AT commands set to use basic InBand Modem functionality.
- ERA_AT_Cmd: ERA GLONASS AT commands set to be use on ERA GLONASS context. The application manage specific timers and redial process according GLONASS Union specification.
- UnEcall_AT_Cmd: Provide AT commands set to be use on ERA GLONASS context or PanEurop context. The application manage specific timers and redial process according GLONASS Union and PanEuropean eCall specifications.
1.2. Document Audience
This release note may be distributed to all direct and indirect customers.
1.3. New Features/Enhancements
|
Feature |
Description |
2. Abbreviations and Definitions
Table 2. Abbreviations and Definitions
|
Abbreviation/Acronym |
Definitions |
|
IVS |
In-Vehicle System |
|
PSAP |
Public Safety Answering Point |
|
MSD |
eCall Minimum Set of Data |
3. Related Documentation
|
Ref. # |
Doc. # |
Rev. |
Document title |
|
|
[R-1] |
4111843 |
R17.00 |
AT Commands Interface Guide for Open AT Application Framework Firmware 7.54.0.A1 |
|
|
[R-2] |
4111844 |
R16.00 |
ADL User Guide for Open AT Application Framework OS 6.54.0.A1 |
|
|
[R-3] |
4112357 |
R04.00 |
eCall In-Band Modem Library AT Command Interface Guide |
|
|
[R-4] |
4112356 |
R06.01 |
eCall In-Band Modem Library Development Guide |
|
|
[R-5] |
4114948 |
R03.01 |
AirPrime - ASN1 for eCall In-Band Modem Library |
|
|
[R-6] |
4114918 |
R05.02 |
ERA Glonass Service Manager Development Guide |
|
|
[R-7] |
4114919 |
R06.01 |
ERA Glonass Service Manager for Open AT Framework AT Command Interface Guide |
|
|
[R-8] |
4114871 |
R01.01 |
AirPrime - SL808xBTA ERA Glonass Sample User Guide |
|
|
[R-9] |
4115922 |
R05.01 |
Unified eCall Service Manager - Development Guide |
|
|
[R-10] |
4115923 |
R06.00 |
Unified eCall Service Manager for Open AT Framework AT Command - Interface Guide |
|
|
[R-11] |
4115145 |
R04.01 |
AirPrime - SL808xT,SL808xBT,SL808xBTA - Product Technical Specification & Customer Design Guidelines |
|
|
[R-12] |
4117611 |
R01.11 |
Customer Release Notes – Firmware 7.54.0.A1 |
|
|
[R-13] |
4118112 |
R01.03 |
Customer Release Notes – OS 6.54.0.A1 |
|
4. Compatibility
Table 4. Hardware Compatibility
|
AirPrime Compatibility List |
|
AirPrime SL808xBTA, SL808xT, SL808xBT |
|
Component |
Version |
|
Open AT Application Framework |
2.54.0.A1.201603181529 |
|
Firmware |
7.54.0.A1.201603171313 |
|
OS |
6.54.0.A1.201511201000 |
|
Internet Library |
5.58.0.A1.201512161421 |
|
Location Library |
1.4.8.201509231354 |
5. Software Release Description
5.1. Release Identification
Table 6. Libraries Release Information
|
Component |
Revision |
|
Software Identification |
1.3.4.201512300930 |
|
Date of generation |
2015-12-30 09:30 |
|
3GPP InBand Modem release |
3GPP TS 26.267 V12.0.0 V11.0.0 V10.0.0 V9.3.0 - V8.6.0 3GPP TS 26.268 V12.0.0 V11.1.0 V10.0.0 V9.4.0 - V8.6.0 3GPP TS 26.269 V12.0.0 V11.0.0 V10.0.0 V9.2.0 - V8.3.0 |
|
Glonass Union |
GOST R54618 2011 with amendment 1 GOST R54619 2011 with amendment 1 GOST R54620 2011 with amendment 1 |
5.2. Software Tools Versions
Table 7. Software Tools Versions
|
S/W Tools Name |
Version |
|
Developer Studio |
3.3 |
|
Compilation Tool Chain |
ARM_EABI_GCC and RVDS |
5.3. Released Files
|
Download Option |
Files |
|
Upgrade through X-modem |
ERA_AT_Cmd\bin\[Target.qct.Location@GPSONE]_RVDS_Release\ERA_AT_Cmd.dwl IVS_AT_Cmd\bin\[Target.qct.Location@GPSONE]_RVDS_Release\IVS_AT_Cmd.dwl UnEcall_AT_Cmd\bin\[Target.qct.Location@GPSONE]_RVDS_Release\UnEcall_AT_Cmd.dwl |
For the upgrade procedure, you can refer to:
• In-line help for upgrade procedure through Developer Studio
• The upgrade procedure through X-modem
6. Software Changes Description
6.1. Validated Corrections/Improvements
|
Description |
Impacted Domain |
Impacted Sub-Domain |
Fixed in |
|
|
81580 |
AirPrime will reset if optional data is set and then read using the AT+ASN1MSD |
eCall Library |
ASN1 |
1.3.4 |
|
81823 |
AT+ECALLRELEASE does not work well with eCall Only Mode SIMs. |
eCall Library |
CECALL |
1.3.4 |
|
81826 |
Spy mode is not re-enabled properly after issuing AT+ECALLRELEASE |
eCall Library |
CECALL |
1.3.4 |
|
75237 |
Re-dial behavior should follow standards for ERA GLONASS and PAN EUROPEAN |
eCall Library |
Unified eCall |
1.3.4 |
|
75615 |
On AirPrime, Redials time of 120 sec for Pan European is affected by ECALLCFG parameters Number of Attempts |
eCall Library |
Unified eCall |
1.3.4 |
|
77698 |
No sound heard from PSAP side when the PSAP redial after call ending during MSD Sending State |
eCall Library |
Unified eCall |
1.3.4 |
|
75619 |
Re-dial for PAN EU sometimes exceeds the 120s re-dial limit |
eCall Library |
Unified eCall |
1.3.4 |
|
78985 |
Set MSD using ERAGSETMSD on AirPrime sometimes fails when called in EARG state CONNECTED |
eCall Library |
Unified eCall |
1.3.4 |
|
78829 |
Timestamps might be reported set wrongly in the MSD after Tue, 19 Jan 2038 03:14:07 GMT. |
eCall Library |
ASN1 |
1.3.3 |
|
76952 |
Add new optional parameter AT+ERAGSETERA and new set option for InBand Modem interface to be able to delay the mute after a detected AL-ACK. |
eCall Library |
ERAG |
1.3.3 |
|
78266 |
AT+ERAGSETMSD cannot be called in SENDING MSD state. |
eCall Library |
ERAG |
1.3.3 |
|
78815 |
ERAGSETMSD sometimes fails when called in erag state CONNECTED. |
eCall Library |
ERAG |
1.3.3 |
|
76369 |
does not unmute under some conditions |
eCall Library |
INBM |
1.3.3 |
|
76955 |
Some little noise is heard at the start of the call |
eCall Library |
INBM |
1.3.3 |
|
77403 |
Low succeed rate for MSD transmission |
eCall Library |
INBM |
1.3.3 |
|
77431 |
When PSAP callback the voice of operator is muted on IVS side |
eCall Library |
INBM |
1.3.3 |
|
77641 |
No proper hangup when call cut in Sending MSD state. |
eCall Library |
INBM |
1.3.3 |
|
77670 |
No sound heard from PSAP side when the PSAP redial after call ending during MSD Sending State |
eCall Library |
INBM |
1.3.3 |
|
72966 |
eCall Only does not unregistered 12 hours after a call as specified. |
eCall Library |
CECALL |
1.3.2 |
|
73506 |
During redial and some timing conditions the AT+ERAGCALLCANCEL will return OK, but the redial will be launched anyway. |
eCall Library |
ERAG |
1.3.2 |
|
73539 |
Dial duration does not work for repeated calls. |
eCall Library |
ERAG |
1.3.2 |
|
73988 |
Customer can't terminate call |
eCall Library |
ERAG |
1.3.2 |
|
74202 |
AT+ERAGOPTDATA does not correctly encode data |
eCall Library |
ERAG |
1.3.2 |
|
74562 |
An OID digit value greater than 127 is not correctly coded |
eCall Library |
INBM |
1.3.2 |
|
73015 |
Value upper than 324000000 for Longitude parameter is not accepted |
eCall Library |
ASN1 |
1.3.1 |
|
72910 |
Service categories on SIM are not read properly and Test & Reconfiguration numbers may be not read correctly for AT+CECALL |
eCall Library |
CECALL |
1.3.1 |
|
72940 |
If spy mode was enabled before, then it will currently not be disabled when inserting a eCall SIM that supports eCall & Normal registration. |
eCall Library |
CECALL |
1.3.1 |
|
72975 |
With badly configured eCall Only SIM the AT+CECALL=0 or 1 will return OK, but no call will be launched. |
eCall Library |
CECALL |
1.3.1 |
|
72570 |
INBM automaton on bad state if AT+INBMCLOSE is done during a call |
eCall Library |
INBM |
1.3.1 |
|
72606 |
INBMEXIT could answer -30 |
eCall Library |
INBM |
1.3.1 |
|
72648 |
+INBMEV: 1 event occurs whereas it shouldn't |
eCall Library |
INBM |
1.3.1 |
|
69176 |
On SL8 missing final answer for the AT+INBMTIMERCFG command |
eCall Library |
INBM |
1.3.0 |
|
71428 |
LLACK NOT RECEIVED raised after call ended |
eCall Library |
INBM |
1.3.0 |
|
71711 |
When T5 is set to 5s, noise can be receive by PSAP |
eCall Library |
INBM |
1.3.0 |
6.2. Interface Changes
Interface change from eCall 1.3.3.201504011023
|
Command |
Comment |
For Open AT Developers, please refer to the Troubleshooting Guide available in Sierra Wireless Source (formerly "Developer Zone") before contacting customer support. For AT developers, please contact customer service for support and debugging information.
7. Troubleshooting
8. Restrictions and Additional Information
This section presents additional information or restrictions that must be taken into account regarding eCall 1.3.4 Library package.
Please note that Open AT restrictions linked to Firmware and OS part are listed in “7.54.0.A1 Firmware Customer Release Note” [R-12] and “OS 6.54.0.A1 Customer Release Note” [R-13]
Table 9. Restrictions and Additional Information
|
Description (What/When) |
Impacted Domain |
Impacted Sub-Domain |
|
|
84100 |
AirPrime does not support Optional data with encoded length longer than 56 Bytes for AT+ASN1 command. Optional data with encoded length longer than 56 Bytes not supported for AT+ASN1 command. |
eCall Library |
ASN1 |
|
83864 |
Resetting mandatory parameters will cause the AT+ASN1MSD? to return the wrong response |
eCall Library |
ASN1 |
|
73497 |
Setting MSD on AirPrime with already encoded ASN1 MSD string fails. |
eCall Library |
ASN1 |
|
73474 |
Optional Data in AT+ASN1MSD command are not correctly handled |
eCall Library |
ASN1 |
|
71118 |
On AirPrime, Location library may sometimes abort with GPS_ABORT_EVENT |
eCall Library |
ERAG |
|
74479 |
AirPrime accepts out of range values for vehicle direction in +ERAGCALL command. |
eCall Library |
ERAG |
|
85504 |
When AT+CECALLINIT is issued after disabling FDN then spy mode is activated. |
eCall Library |
CECALL |
|
85765 |
Audio remains muted if eCall is cancelled immediately using AT+ERAGCALLCANCEL from IVS. |
eCall Library |
INBM |
|
75236 |
As AT+CECALL is 3GPP specific, introduce a separate command to AT+ECALL applicable for Unified application. |
eCall Library |
Unified eCall |
|
75028 |
On AirPrime, issuing command AT+ECALLCANCEL directly after giving AT+CECALL will sometimes not work. |
eCall Library |
Unified eCall |
|
75007 |
Spy mode on AirPrime is not disabled after release library +ECALLRELEASE command. |
eCall Library |
Unified eCall |
|
74947 |
Issuing command AT+ECALLINIT=? On AirPrime does not return the limit values. |
eCall Library |
Unified eCall |
|
73446 |
Issuing command AT+ECALLINIT? On AirPrime does not always return correct values. |
eCall Library |
Unified eCall |
|
84258 |
Setting MSD with already encoded ASN1 MSD string fails with AT+ECALLSETMSD=2 not implemented2 min delay sometimes not respected for redial in PAN EU |
eCall Library |
Unified eCall |
Tags
Related items
ADL User Guide OS 6.54.0.A1This document provides full description of the APIs associated with the Open AT Application Framework OS
Open AT Application Framework 2.54.0.A1 Full Installer for SL808xT/BTFull installer for Open AT Application Framework 2.54.0.A1 for AirPrime SL808xT/BT
Internet Library 5.58.0.A1 Connectivity Development GuideThis document provides full description of the APIs associated with the IP Connectivity library 5.58.0.A1.
- Location Library for Open AT Framework Development Guide
This document provides full description of the APIs associated with the Location Library
- Security Library for Open AT Framework Development Guide
This document provides full description of the APIs associated with Internet Library SSL API, which provides SSL-secured communication channels to the Internet Library. This document assumes the reader is already familiar with Internet Library. Please refer to the following section for a list of related documents.
- eCall In-Band Modem Library Development Guide
This document provides Sierra Wireless customers with full description of the APIs associated with the eCall In-Band Modem Library.
- ERA Glonass Service Library Development Guide
This document is to provide Sierra Wireless customers with a full description of the APIs associated with the ERA Glonass Service Manager Library.
Extended AT Commands ManualThis document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways through Extended AT Application.